Wheel Fitment Guide - Ford Focus RS (MK2 / DA3)

Wheels Fitment Guide - Ford Focus RS (MK2 / DA3)

Model generation MK2 Hatchback (2009-2011) | 2.5 5-Cylinder Turbo (305 hp RS & 350 hp RS500) | RevoKnuckle Widebody

Wheels Fitment Guide Ford Focus RS MK2 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Ford Focus RS (MK2)?
The Ford Focus RS MK2 is an absolute legend with its pronounced widebody bodywork and the iconic 2.5-litre five-cylinder turbo engine producing 305 HP (350 HP on the matte-black RS500). To transfer all that power to the front wheels without unpleasant torque steer, Ford equipped the Focus RS MK2 with the innovative RevoKnuckle front suspension. The car uses the bolt pattern 5x108 with a 63.4 mm centre bore. Factory-spec the MK2 RS rides on 19 inch 15-spoke wheels (8.5J ET60). Because the RevoKnuckle geometry is extremely sensitive to offset, a considered wheel choice (ET45-ET50 on 8.5J/9.0J) is crucial to retain precise steering behaviour and to clear the 336 mm RS brakes without scratching. At Wheels 'N Customs in Nijkerk we pre-check every order based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Ford Focus RS MK2

The values below represent the original factory parameters of the Ford Focus RS MK2 (Base RS & RS500). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x108 Standard Ford 5-lug bolt circle on this platform.
Centre bore (CB) 63.4 mm Known Ford centre bore. Hub-centric rings required for wheels with a larger centre bore (e.g. 73.1 mm).
Wheel fastening type M12 x 1.5 Wheel nuts Conical 60-degree nuts on aftermarket wheels. Tightening torque of 130 Nm.
OEM Wheel Sizes (19" Standard RS) 8.5J x 19 ET60 Factory 15-spoke silver or white alloy wheels.
OEM Wheel Sizes (19" RS500 Option) 8.5J x 19 ET60 Factory matte black 15-spoke RS500 wheels.
OEM Tyre Sizes 235\/35 ZR19 Supplied on Continental SportContact 3 with XL Load Index.

2. Aftermarket Fitment Guide (18" & 19")

Do you want to give your Ford Focus RS MK2 a tighter fill of the wide arches, a lightweight trackday setup or weight savings with Flow Formed / Forged wheels from brands like JR-Wheels (SL01 / JR11 / JR18), Motec, Autec, Borbet, Sparco, OZ Racing (Ultraleggera) or Maxton-styling? Below you will find the ideal sizes for a scratch-free fit, also when lowered with Eibach, H&R or KW coilovers.

Wheel Diameter & Construction Position Recommended Rim Width (J) Ideal ET Range Recommended Tyre Size
18 Inch (Trackday / Comfort Setup) Front & Rear (Square) 8.0J / 8.5J ET45 - ET50 235\/40 R18 (or 245\/40 R18)
19 Inch (Absolute Street Performance Sweet Spot) Front & Rear (Square) 8.5J ET45 - ET50 235\/35 R19 (or 245\/35 R19)
19 Inch (Aggressive Wide Flush Show Stance) Front & Rear (Square) 9.0J ET42 - ET45 245\/35 R19 (Light stretch) or 255\/30 R19

3. Wheel Spacers & Bolt Pattern Adapters for Ford Focus RS MK2

Do you want to push the original 19" RS wheels (8.5J ET60) slightly further out to make them flush with the wide fenders?

  • Wheel Spacers: On the original 8.5J ET60 factory wheels H&R or Eibach spacers of 12 mm to 15 mm can be fitted at the front and 15 mm to 20 mm at the rear. Use only hub-centric aluminium spacers with the specific 63.4 mm hub bore and extended studs / M12x1.5 wheel nuts.
  • Bolt Pattern Adapters & Fitment Check: Do you have an exclusive custom wheelset in mind with a different bolt pattern (e.g. 5x108 to 5x112 or 5x114.3)? Bolt pattern adapters solve this, but require a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the resulting ET in advance to prevent the tyres contacting the wheel arches when compressing at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Component / Labour Fitting Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vans / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vans / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of over 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does Wheels 'N Customs' vehicle check and fitment guarantee work?

In our webshop you filter parts by Brand, Model, Variant and Year (we deliberately do not use a license plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus/Mongoose exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and sets fitted with tyres. When returning incorrectly ordered items without prior verification of Brand/Model/Variant restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Ford Focus RS (MK2), would you like advice on RevoKnuckle requirements or 336mm caliper clearance, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl