Wheel Fitment Guide - Ford Focus ST (MK3 / Facelift)

Wheel Fitment Guide - Ford Focus ST (MK3 / Facelift)

Model generations MK3 Pre-Facelift & Facelift (2012-2018) | 2.0 EcoBoost Turbo (250 hp) & 2.0 TDCi Diesel (185 hp) | Hatchback & Wagon

Wheel Fitment Guide Ford Focus ST MK3 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Ford Focus ST (MK3)?
The Ford Focus ST MK3 (available as a 5-door Hatchback and practical Wagon) is one of the most beloved everyday hot hatches. Powered by the 250 HP 2.0-litre EcoBoost turbo engine (or the torquey 185 HP TDCi diesel), the Focus ST places specific demands on wheel choice. The car uses the bolt pattern 5x108 with a 63.4 mm centre bore and M12x1.5 wheel nuts. From the factory the Focus ST MK3 sits on 18 inch Y-spoke or 19 inch Rock Metallic alloy wheels (8.0J ET55). For aftermarket wheels (such as 8.0J or 8.5J width) a lower offset (ET40-ET45) is the absolute 'sweet spot' to make the wheels sit flush with the arches, while ensuring sufficient spoke clearance around the 320 mm / 335 mm ST brake calipers. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Ford Focus ST MK3

The values below represent the original factory parameters of the Ford Focus ST MK3 (Pre-Facelift & Facelift). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x108 Standard Ford 5-lug bolt circle for this platform.
Centre bore (CB) 63.4 mm Common Ford hub bore. Centre rings needed for wheels with a larger hub diameter (e.g. 73.1 mm).
Wheel Fixing Type M12 x 1.5 Wheel Nuts Conical 60-degree nuts on aftermarket wheels. Tightening torque of 130 Nm.
OEM Wheel Sizes (18" Standard Y-Spoke) 8.0J x 18 ET55 Factory Y-spoke silver or Rado Grey alloy wheels.
OEM Wheel Sizes (19" Option Rock Metallic / Black) 8.0J x 19 ET55 Factory 5-spoke Rock Metallic or patented black 19 inch wheels.
OEM Tyre Sizes 235/40 R18 (18") / 235/35 R19 (19") Supplied on Goodyear Eagle F1 Asymmetric 2/3 or Michelin Pilot Sport 4 with XL Load Index.

2. Aftermarket Fitment Guide (18" & 19")

Do you want to give your Ford Focus ST MK3 a tighter fill of the wheel arches, a sportier stance or weight savings with Flow Formed / Forged wheels from brands like JR-Wheels (SL01 / JR11 / JR18), Motec, Autec, Borbet, Sparco, OZ Racing (Ultraleggera / Formula HLT) or Maxton-styling? Below you’ll find the ideal sizes for a scratch-free fit, also when lowered with Eibach, H&R or KW coilovers.

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
18 Inch (OEM+ Comfort & Winter Setup) Front & Rear (Square) 8.0J / 8.5J ET40 - ET45 235/40 R18
19 Inch (Absolute Street Performance Sweet Spot) Front & Rear (Square) 8.5J ET40 - ET45 235/35 R19
19 Inch (Aggressive Flush Show Stance) Front & Rear (Square) 8.5J / 9.0J ET38 - ET42 235/35 R19 (Light stretch on 9.0J) or 245/35 R19

3. Spacers & Bolt Pattern Adapters for Ford Focus ST MK3

Do you want to push the original 18" or 19" ST wheels (8.0J ET55) slightly further out to make them sit flush with the arches?

  • Spacers: On the original 8.0J ET55 factory wheels H&R or Eibach spacers of 12 mm to 15 mm at the front and 15 mm to 18 mm at the rear can be fitted. Use only hub-centred aluminium spacers with the specific 63.4 mm hub bore and extended studs / M12x1.5 wheel nuts.
  • Bolt Pattern Adapters & Fitment Check: Are you eyeing an exclusive custom wheelset with a different bolt pattern (e.g. 5x108 to 5x112 or 5x114.3)? Bolt pattern adapters cover this, but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the total effective ET in advance to prevent the tyres from contacting the arch liners when the suspension compresses at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspensions daily on 2 to 5 cars. We use transparent fixed rates (excl. VAT):

Part / Labour Labour Rate (Excl. VAT) Indicative Fitment Time
Complete Wheel Set Fitment & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Lip Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitment (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and APK-certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If there is any doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are the wheels and parts we fit approved for the inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus/Cobra exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free APK inspection in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Version restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Ford Focus ST (MK3), want advice about ST brake caliper clearance or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl