Model generations S550 Fastback & Convertible (2015-2023) | 5.0 V8 Coyote (421 hp, 450 hp & Mach 1 460 hp) | S550 Chassis
Why is correct wheel fitment crucial for the Ford Mustang GT (S550)?
The Ford Mustang GT S550 is the modern embodiment of the American V8 muscle car. Equipped with an independent rear suspension and the 5.0 V8 Coyote engine, the S550 platform uses the bolt pattern 5x114.3 with a 70.6 mm centre bore and M14x1.5 wheel nuts. Because the Mustang GT has extremely wide hips, Ford fits a staggered wide setup from the factory (9.0J ET45 front / 9.5J ET52.5 rear). When choosing aftermarket alloy wheels, spoke clearance around the 380 mm 6-piston Brembo calipers of the Performance Pack is extremely important, as is maintaining the correct offset to avoid rubbing on the wheel arches. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Version, Year and chassis number.
The values below represent the original factory parameters of the Ford Mustang GT S550 & Mach 1. Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x114.3 | Standard 5-lug bolt circle on the S550 platform. |
| Centre bore (CB) | 70.6 mm | Specific Ford Mustang S550 centre bore. Centre rings required for larger wheel centre bores (e.g. 73.1 mm). |
| Wheel fastener type | M14 x 1.5 Wheel nuts | Conical 60-degree seat. Tightening torque of 200 Nm. |
| OEM Wheel Sizes (19" Performance Pack GT) | Front: 9.0J x 19 ET45 Rear: 9.5J x 19 ET52.5 |
Factory multispoke gloss black or machined alloy wheels. |
| OEM Wheel Sizes (19" Mach 1) | Front: 9.5J x 19 ET40 Rear: 10.0J x 19 ET47.5 |
Factory Mach 1 Tarnish Dark forged lightweight wheels. |
| OEM Tyre Sizes (19") | Front: 255\/40 R19 (275\/40 R19 on Mach 1) Rear: 275\/40 R19 (285\/35 R19 on Mach 1) |
Mandatory fitment with Michelin Pilot Sport 4S with XL Load Index. |
Do you want to give your Ford Mustang GT S550 an even wider, more aggressive stance or save weight with Flow Formed / Custom Forged wheels from brands like Concaver, JR-Wheels, Rotiform, Shelby-style wheels, Velgenland, BC Forged or Roush/RTR styling? Below you’ll find the ideal sizes for scratch-free clearance, also when lowered with Eibach, H&R, Pedders or KW coilovers.
| Wheel Diameter & Construction | Position | Recommended Wheel Width (J) | Ideal ET Range | Recommended Tyre Size |
|---|---|---|---|---|
| 19 Inch (Flush Performance Sweet Spot Wide Set) | Front Rear |
9.5J 10.5J / 11.0J |
ET30 - ET35 ET50 - ET55 |
255\/40 R19 (or 275\/40 R19) 285\/35 R19 (or 295\/35 R19) |
| 20 Inch (Absolute Sweet Spot Show & Street) | Front Rear |
9.0J / 9.5J 10.5J / 11.0J |
ET30 - ET35 ET50 - ET55 |
255\/35 R20 (or 275\/35 R20) 285\/30 R20 (or 295\/30 R20 / 305\/30 R20) |
| 20 Inch (Exclusive Wide Shelby / RTR Stance) | Front Rear |
10.0J 11.0J / 11.5J |
ET28 - ET32 ET50 - ET53 |
275\/35 R20 305\/30 R20 (Requires precise alignment) |
Do you want to push the original 19" factory wheels (9.0J ET45 front / 9.5J ET52.5 rear) slightly outwards to make them sit flush with the wide wheel arches?
In our spacious and professional workshop in Nijkerk we daily fit wheels, exhausts, bodykits and suspension on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Operation | Labour Rate (Excl. VAT) | Indicative Fit Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer’s warranty and MOT reassurance.
In our webshop you filter parts by Brand, Model, Specification and Year of Manufacture (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If there is any doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Borla/Roush/Corsa exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to cancel your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Model/Specification, restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Ford Mustang GT (S550), would you like advice on Brembo 6-pot caliper clearance or track width spacers, or would you like an all-in quote including workshop fitting in Nijkerk?