Wheels Fitment Guide - Ford Puma ST (1.5 EcoBoost 200 hp / 1.0 Hybrid 170 hp)

Wheels Fitment Guide - Ford Puma ST (1.5 EcoBoost 200 hp / 1.0 Hybrid 170 hp)

Model generation Puma ST (2020-2026) | 1.5 EcoBoost (200 hp / 320 Nm) & 1.0 Hybrid Powershift (170 hp) | Quaife Mechanical LSD & Force Vectoring Springs

Wheels Fitment Guide Ford Puma ST Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Ford Puma ST?
The Ford Puma ST (introduced in 2020 with an original new price of around € 37.000,- to € 42.500,-) redefined the crossover segment by bringing true hot-hatch dynamics to a compact SUV body. Powered by the fiery 1.5-litre 3-cylinder EcoBoost turbo engine (200 HP and 320 Nm torque, or the later 1.0 EcoBoost Mild Hybrid Powershift with 170 HP) and equipped with specific steering geometry (25% faster than standard) and patented Force Vectoring suspension, the Puma ST is surprisingly agile. Unlike the Fiesta ST MK8 (which uses 4x108), the Puma ST uses the more robust 5-bolt pattern 5x108 with a 63.4 mm centre bore and M12x1.5 wheel nuts. Factory-fitted, the Puma ST sits on large 19 inch Magnetite or Machined/Black alloy wheels (8.0J ET47.5 with 225/40 R19 Michelin Pilot Sport 4S tyres). When selecting aftermarket or winter wheels (such as 18x8.0J or 19x8.0J/8.5J with ET40 to ET47.5) the wheels sit beautifully flush with the matte black wheel arch trims. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Ford Puma ST

The values below represent the original factory parameters of the Ford Puma ST (1.5 EcoBoost / 1.0 Hybrid). Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory Value (OEM) Notes & Advice
Pitch Circle Diameter (PCD) 5x108 Standard Ford 5-lug bolt circle on the Puma ST platform.
Hub Bore (CB) 63.4 mm Standard Ford hub bore. Centre rings required for wheels with a larger hub bore (e.g. 67.1 mm or 73.1 mm).
Wheel Fastening Type M12 x 1.5 Conical Nuts Torque of 135 Nm recommended by Ford Performance.
OEM Wheel Sizes (19" Standard Magnetite / Machined) 8.0J x 19 ET47.5 Factory 19 inch 5-spoke alloy wheels in a square setup.
OEM Tyre Sizes 225/40 R19 Supplied on Michelin Pilot Sport 4S with XL Load Index.

2. Aftermarket Fitment Guide (18" & 19" Puma ST)

Do you want to fit your Ford Puma ST with a dedicated winter wheel set, a sportier stance or save weight with Flow Formed wheels from brands like Mountune (m-Spec), Team Dynamics (Pro Race 1.2 in 5x108), JR-Wheels (JR11 / JR21 / JR30 / SL01), Concaver, OZ Racing (Ultraleggera / Superturismo LM), Motec (Ultralight), Autec (Wizard), Sparco, Milltek, Remus or Maxton-styling? Below you will find the ideal sizes for a scratch-free fit, also when lowered with Eibach, H&R or KW coilovers.

Wheel Diameter & Construction Position Recommended Rim Width (J) Ideal ET Range Recommended Tyre Size
18 Inch (Lightweight Fast Road / Winter Sweet Spot) Front & Rear (Square) 8.0J ET40 - ET47.5 215/45 R18 (or 225/45 R18)
19 Inch (OEM+ Flush Street Performance Sweet Spot) Front & Rear (Square) 8.0J / 8.5J ET40 - ET47.5 225/40 R19 (or 235/40 R19)
19 Inch (Aggressive Show & Stance Setup) Front & Rear (Square) 8.5J ET38 - ET42 225/40 R19 (Slight stretch on 8.5J to keep clear of the arch lips)

3. Wheel Spacers & Fitment Determinations for Puma ST

Do you want to push the original 19" ST factory wheels (8.0J ET47.5) further outwards to sit flush with the plastic arch trims?

  • Wheel Spacers: On the original 8.0J ET47.5 factory wheels, H&R, Eibach or Mountune spacers of 12 mm to 15 mm on the front and 15 mm to 18 mm on the rear can be fitted. Use hub-centric aluminium spacers specifically for the 5x108 bolt pattern and 63.4 mm hub bore with extended M12x1.5 wheel studs only.
  • 325mm ST Front Brake Clearance: The Puma ST is fitted with large 325 mm front discs. When selecting 18 inch alloy wheels for winter or trackday use you should verify that the inner area of the wheel provides sufficient spoke clearance around the brake calipers.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Component / Operation Labour Rate (Excl. VAT) Indicative Fitment Time
Complete Wheel Set Fitment & Balancing € 75 - € 115 45 - 60 minutes
Front Splitter / Bumper Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Lip Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitment (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust outlet (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and check the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Make, Model, Variant and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW/Mountune, Milltek/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a worry-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the terms for cancellation and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to cancel your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Make/Model/Variant restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Ford Puma ST (1.5 EcoBoost 200 hp / 1.0 Hybrid 170 hp), want advice on 18 or 19 inch Mountune / OZ Racing wheels or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl