Model generation FC1 Sedan & FC3 Coupé (2017-2021) | 1.5 VTEC Turbo L15B7 (205 hp / 260 Nm 6-speed Manual) | Helical LSD & Adaptive Damper System

Why is correct wheel fitment crucial for the Honda Civic Si (FC1 / FC3)?
The Honda Civic Si (Generation FC3 Coupé and FC1 Sedan, produced between 2017 and 2021 with an approximate original price of € 29.000,- to € 35.000,-) is considered the 'sweet spot' in the Honda tuning range. Powered by the punchy 205 hp and 260 Nm 1.5-litre VTEC turbo engine paired with a 6-speed manual gearbox, a mechanical helical limited-slip differential (Helical LSD) and adaptive dampers (ADS), the Civic Si offers huge driving enjoyment. Unlike the Civic Type R (which uses 5x120) the Civic Si uses the familiar JDM bolt pattern 5x114.3 with a 64.1 mm centre bore and M12x1.5 wheel nuts. From the factory the Civic Si comes on 18-inch two-tone alloy wheels (8.0J ET50 with 235/40 R18 tyres). When selecting aftermarket JDM wheels (such as 18x8.5J or 18x9.5J with ET35 to ET45) track width is increased. This gives an aggressive stance that pairs perfectly with Seibon carbon bonnets, HKS/Invidia exhaust systems and Maxton Design front splitters. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The image below shows a Honda Civic Si Coupé (FC3) with aftermarket alloy wheels and lowered suspension:
The values below represent the original factory parameters of the Honda Civic Si Coupé (FC3) and Sedan (FC1). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x114.3 | Classic Honda 5-bolt pitch circle on the 10th generation Civic platform. |
| Centre bore (CB) | 64.1 mm | Standard Honda hub bore. Centre rings required for wheels with a larger hub bore (e.g. 73.1 mm). |
| Wheel fastener type | M12 x 1.5 Conical Nuts | Torque of 108 Nm recommended by Honda. |
| OEM Wheel sizes (18" Standard Si Bi-Tone) | 8.0J x 18 ET50 | Factory 18 inch 5-spoke alloy wheels in a square fitment. |
| OEM Tyre sizes | 235/40 R18 | Supplied on Goodyear Eagle F1 Asymmetric 2 or Continental SportContact 6. |
Want to fit your Honda Civic Si with a wider JDM track, deep concavity or weight savings by using Flow Formed / Custom Forged wheels from brands like Rota (Grid / Torque), Enkei (RPF1 / NT03+M), Rays VOLK (TE37 / CE28), Work Wheels (EMOTION CR Kiwami), JR-Wheels (JR11 / JR21 / JR30 / SL01), Concaver, OZ Racing, Sparco or Maxton Styling? Below are the ideal sizes for scratch-free fitment, also when lowering with Eibach, H&R, BC Racing or D2 coilovers.
| Wheel diameter & construction | Position | Recommended rim width (J) | Ideal ET range | Recommended tyre size |
|---|---|---|---|---|
| 18 Inch (OEM+ Flush Street Performance Sweet Spot) | Front & Rear (Square) | 8.5J | ET38 - ET45 | 235/40 R18 (or 245/40 R18) |
| 18 Inch (Aggressive JDM Wide Trackday Stance) | Front & Rear (Square) | 9.5J | ET35 - ET38 | 245/40 R18 (or 255/35 R18) |
| 19 Inch (Show & Performance Stance Setup) | Front & Rear (Square) | 8.5J / 9.0J | ET38 - ET42 | 235/35 R19 (or 245/35 R19) |
Want to push the original 18" Si factory wheels (8.0J ET50) further out to sit flush with the arches?
In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspensions daily to 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Operation | Labour rate (Excl. VAT) | Indicative labour time |
|---|---|---|
| Complete wheel set fitting & balancing | € 75 - € 115 | 45 - 60 minutes |
| Front spoiler / bumper lip / splitter fitting | € 80 - € 120 | 45 - 60 minutes |
| Side skirts set fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear diffuser fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof spoiler extension / boot spoiler fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars set fitting (Commercial vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT certainty.
In our webshop you filter parts by Make, Model, Variant and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW/BC Racing, Invidia/HKS/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This ensures a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Variant restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Honda Civic Si Coupé or Sedan (FC1 / FC3 1.5 VTEC Turbo 205 hp), would you like advice on 18 inch Enkei / Rays / JR-Wheels wheels or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?