Wheel Fitment Guide: Honda Civic Type R FK8 / FL5 (2017–Present)

Wheels Fitment Guide: Honda Civic Type R FK8 / FL5 (2017-Present)

The Ultimate Technical Wheel & Suspension Guide for the Civic Type R

Planning to fit lightweight performance wheels, wheel spacers or a coilover kit to your Honda Civic Type R (FK8 or FL5)? In this official guide from Wheels 'N Customs you’ll find exactly all factory specifications, safe aftermarket margins for 18, 19 and 20 inch wheels, Brembo caliper clearance and lowering advice.

Why is accurate fitment essential on the Honda Civic Type R?
The Honda Civic Type R is known for its advanced Dual-Axis front suspension. Factory FK8 cars come fitted with very large 20 inch wheels and an extreme ET of ET60 (and ET60 on 19 inch for the FL5). An incorrect ET disturbs the scrub radius principle, which can lead to severe torque steer under full acceleration. In addition, the red Brembo 4-piston calipers require sufficient spoke clearance.

1. Original Factory Specifications (OEM Fits)

The OEM specifications below apply to the Honda Civic Type R FK8 (2017-2021) and FL5 (2023-present):

Specification Factory Value (OEM) Expert Note
PCD (Bolt Pattern) 5x120 Standard Type R 5-stud PCD (different from regular Civics!).
Centre Bore (CB) 64.1 mm Specific Honda hub fitment; use centring rings when hub bores are larger than 64.1 mm.
OEM Wheel Sizes 20 Inch (FK8) / 19 Inch (FL5) 20x8.5J ET60 (FK8) / 19x9.5J ET60 (FL5 Forged).
OEM ET Value ET60 Extremely high ET to reduce torque steer and keep track width tight.
Wheel Fasteners M14 x 1.5 Conical (R14) Note: OEM wheels use conical bolts. Aftermarket wheels require 60° conical bolts!
Tightening Torque 127 Nm Torque down with a calibrated torque wrench on clean hubs.

2. Aftermarket Fitment Guide (What fits safely?)

Many drivers switch from the harsh factory 20 inch wheels to 18 inch or 19 inch wide sets. See the proven combinations:

Size Wheel Width (J) Ideal ET Value Recommended Tyre Size Fitment Character
18 Inch (Track / Circuit Setup) 18x9.5J ET45 - ET50 265/35 R18 Most popular circuit setup! More tyre sidewall, excellent grip and shock absorption on the track.
19 Inch (Performance / Street) 19x9.5J ET45 - ET50 265/30 R19 or 265/35 R19 Golden Middle Ground! Excellent balance between sharp looks and comfort.
20 Inch (OEM+ Look) 20x8.5J / 20x9.0J ET45 - ET50 245/30 R20 Aggressive appearance. Fills the arches maximally while retaining crisp steering response.

3. Wheel Spacers, Hub Adapters & Lowering Advice

You can transform a Civic Type R’s stance and handling by lowering the centre of gravity and subtly widening the track width.

  • Wheel Spacers (Spacers): Are you running the original 20 inch FK8 wheels (ET60)? A spacer set of 15 mm to 20 mm per side will bring the wheels flush with the widened front and rear arches. Always use hub-centric spacers (64.1 mm) and longer M14x1.5 extended bolts!
  • Lowering (Eibach Pro-Kit / H&R / Swift / KW Clubsport): The Type R uses electronically controlled adaptive dampers. With lowering springs (20 mm to 25 mm) from Eibach or H&R the adjustable damper functionality (Comfort / Sport / +R mode) remains 100% intact. Combined with an 18x9.5J ET45 fitment the wheel arch will remain completely rub-free.
  • Hub Adapters (5x120 to 5x114.3): Do you want to fit Japanese motorsport wheels that are only available in the 5x114.3 bolt pattern? With custom-made 15 mm thick adapters you can convert the bolt pattern. Take adapter thickness into account when selecting your wheel.

4. Frequently Asked Questions (FAQ)

Will 18x9.5J ET45 wheels rub on a lowered Civic Type R FK8 or FL5?
No, provided you choose a 265/35 R18 tyre size. This combination is the most chosen 'sweet spot' worldwide for track and street use. Even with a lowered suspension up to 25 mm this setup will not rub against the inner wheel arches.
Do all 18 inch wheels fit over the large Brembo calipers of the Type R?
No, the front 4-piston Brembo calipers on the Civic Type R sit very close to the spokes. Not only the ET value is important, but also the curvature of the spokes (brake clearance). Proven wheels such as Volk Racing TE37, Rays Gram Lights, Titan 7, Motec Nitro, OZ Ultraleggera and JR-Wheels JR30 are guaranteed to fit.
Should I use conical wheel bolts with new aftermarket wheels?
Yes! Honda's factory wheels use ball-conical (R14) bolts. Almost all aftermarket motorsport and tuning wheels (such as Rays, OZ, Sparco, JR-Wheels, Enkei) use 60° conical M14x1.5 wheel bolts. Never use the original Honda bolts on conical aftermarket wheels!

Have Your Fitment Checked By The Experts

Unsure about the correct ET, want to know which 18 inch or 19 inch circuit set will clear your Brembo brakes, or need advice on a suitable lowering kit for your Type R? Contact the experts at Wheels 'N Customs in Nijkerk directly.

Ask Our Experts For Advice

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl