Model generation BK (2009-2016) | 2.0 T‑GDI (214/275 hp) & 3.8 V6 Lambda (303/350 hp) | Torsen Limited Slip Differential & Rear‑Wheel Drive Staggered Setup

Why is correct wheel fitment crucial for the Hyundai Genesis Coupé (BK)?
The Hyundai Genesis Coupé (BK generation, produced from 2009 to 2016 with an original new price of approximately € 34.000,- to € 43.500,-) is a true rear-wheel-drive sports coupe. Whether it’s the 2.0 Turbo (214 HP pre-facelift or 275 HP BK2 facelift) or the thundering 3.8-litre V6 (303 HP to 350 HP GDI), the Genesis Coupé offers a fantastic balance of power, sound and drift dynamics. The Genesis Coupé uses the bolt pattern 5x114.3 with a 67.1 mm centre bore and M12x1.5 wheel nuts. Crucial for the Genesis Coupé is the factory Staggered (wide set) setup. Factory-fit the Genesis Coupé rides on 18 inch (8.0J ET33 front / 8.5J ET33 rear with 225/45 R18 and 245/45 R18 tyres) or 19 inch alloy wheels (8.0J ET35 front / 8.5J ET35 rear with 225/40 R19 and 245/40 R19 tyres). Enthusiasts choosing aftermarket wheels almost always opt for a wider, more aggressive stance with deep rear concavity (for example 19x8.5J ET20–ET25 front and 19x9.5J or 19x10.5J ET20–ET25 rear). On R-Spec and Track models with 4-pot Brembo brakes you must also account for spoke clearance. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The image below shows a Hyundai Genesis Coupé fitted with an aggressive aftermarket alloy wide set:
The values below represent the original factory parameters of the Hyundai Genesis Coupé (BK 2.0T / 3.8 V6). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Explanation & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x114.3 | Standard Hyundai 5-lug bolt circle on the BK RWD platform. |
| Centre bore (CB) | 67.1 mm | Standard Hyundai centre bore. Hub rings required for wheels with a larger centre bore (e.g. 73.1 mm). |
| Wheel fastening type | M12 x 1.5 Conical Nuts | Torque of 110 Nm recommended by Hyundai Performance. |
| OEM Wheel sizes (18" Standard Staggered) | 8.0J x 18 ET33 Front 8.5J x 18 ET33 Rear |
Factory 18 inch alloy wide set in RWD configuration. |
| OEM Wheel sizes (19" R-Spec / Track Staggered) | 8.0J x 19 ET35 Front 8.5J x 19 ET35 Rear |
Factory 19 inch dark grey/polished alloy wide set on Brembo models. |
| OEM Tyre sizes | 225/45 R18 Front / 245/45 R18 Rear (18") 225/40 R19 Front / 245/40 R19 Rear (19") |
Supplied on Bridgestone Potenza RE050A or Continental SportContact with XL Load Index. |
Do you want to fit your Hyundai Genesis Coupé with a wider rear track, deep concavity or save weight with Flow Formed / Custom Forged wheels from brands such as JR-Wheels (JR3 / JR11 / JR21 / JR30 / SL01), Concaver, Work Wheels (EMOTION CR Kiwami), Rays VOLK (TE37 / CE28), Enkei (RPF1 / RPF1RS), Rotiform, Veemann, Vossen, Invidia, ISR Racing or Maxton-styling? Below you’ll find the ideal sizes for scratch-free fitting, also when lowered with Eibach, H&R, BC Racing, Megan Racing or KW coilovers.
| Wheel diameter & construction | Position | Recommended wheel width (J) | Ideal ET value range | Recommended tyre size |
|---|---|---|---|---|
| 18 Inch (OEM+ Flush Fast Road Wide Set) | Front Rear |
8.5J Front 9.5J Rear |
ET25 - ET30 ET25 - ET30 |
225/45 R18 Front 255/40 R18 Rear |
| 19 Inch (OEM+ Flush Street Performance Sweet Spot) | Front Rear |
8.5J Front 9.5J Rear |
ET20 - ET25 ET20 - ET25 |
235/35 R19 Front 265/35 R19 Rear |
| 19 Inch (Aggressive Deep Concave / Stance Wideset) | Front Rear |
9.0J or 9.5J Front 10.5J Rear |
ET15 - ET22 ET15 - ET22 |
245/35 R19 Front 275/35 R19 Rear (Light stretch on 10.5J) |
Do you want to push the original 18" or 19" Genesis factory wheels (8.0J/8.5J ET33/35) slightly further out to make them sit flush with the body arches?
In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspensions to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):
| Part / Operation | Fitting Rate (Excl. VAT) | Indicative Fitting Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Lip / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, factory warranty and MOT assurance.
On our webshop you filter parts by Brand, Type, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW/BC Racing, Invidia/ISR/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are items specially made to measure, custom-drilled wheels (Custom ET/Blank) and mounted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification, restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Hyundai Genesis Coupé (BK 2.0 Turbo / 3.8 V6 RWD), would you like advice on 19 inch JR-Wheels / Work / Rays wide sets or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?