Wheel Fitment Guide: Hyundai i30 N / N Performance (2017-Present)

Wheels Fitment Guide: Hyundai i30 N / N Performance (2017-Present)

The Ultimate Technical Wheel & Suspension Guide for the Hyundai i30 N

Want to equip your Hyundai i30 N (Hatchback or Fastback) with a lightweight set of performance wheels, spacers or a lowering kit? In this official guide from Wheels 'N Customs you will find all OEM factory specifications, safe aftermarket sizes, advice on the N-Performance brakes and recommended lowering margins.

Why is correct wheel fitment so important on the Hyundai i30 N?
The Hyundai i30 N features an electronically controlled limited-slip differential (e-LSD) and an adaptive ECS suspension. The factory wheels have a very high offset (ET55). If you switch to aftermarket wheels with too low an ET (for example ET35), you alter the scrub radius and the tyre can contact the inner plastic wheel arch lip during heavy suspension travel on track or public roads.

1. Original Factory Specifications (OEM Fits)

The factory values below apply to the Hyundai i30 N (250 HP, 275 HP Performance & Facelift 280 HP DCT/Manual):

Specification Factory Value (OEM) Expert Notes
Bolt Pattern (PCD) 5x114.3 Asian 5-bolt bolt pattern.
Centre Bore (CB) 67.1 mm Specific Hyundai/Kia centre bore; centre rings required for wheels with a larger centre hole.
OEM Wheel Sizes 18 and 19 Inch 18" (i30 N Standard 18x7.5J ET53), 19" (i30 N Performance 19x8.0J ET55 / Facelift Forged).
OEM ET Range ET53 - ET55 Very high OEM ET values to keep the wheel tucked deep inside the arches.
Wheel Fastening M12 x 1.5 Conical (60°) Fastened using M12x1.5 conical wheel bolts.
Torque 110 - 130 Nm Tighten to specification with a calibrated torque wrench.

2. Aftermarket Fitment Guide (What fits safely?)

Do you want the wheel to sit tighter in the arch ('flush fitment') without tyres rubbing during cornering? Check the recommended aftermarket sizes:

Size Wheel Width (J) Ideal ET Value Recommended Tyre Size Fitment Character
18 Inch (Track Setup) 18x8.0J / 18x8.5J ET45 - ET50 225/40 R18 or 235/40 R18 Most popular size for the Nürburgring; lighter weight, more tyre sidewall, maximum grip.
19 Inch (Street / Flush) 19x8.5J ET45 - ET50 235/35 R19 The Golden Standard! Fits perfectly with the arches without risk of rubbing.

3. Wheel Spacers, Bolt Adapters & Lowering Advice

The Hyundai i30 N has a fantastic chassis that can be elevated both visually and dynamically with a few targeted tweaks.

  • Wheel Spacers (Spacers): Are you running the original 19 inch OEM wheels (19x8.0J ET55)? A spacer kit of 12 mm per side at the front and 15 mm per side at the rear will bring the wheels perfectly flush with the body. Use only hub-centric spacers (67.1 mm) and longer M12x1.5 push-through studs or DRM systems with their own stud mounting!
  • Lowering (Eibach Pro-Kit / H&R / KW): The i30 N comes from the factory with electronically adjustable dampers (ECS). With lowering springs from Eibach (15 mm) or H&R (25-30 mm) the adaptive suspension remains fully intact. In combination with a 19x8.5J ET45 to ET48 wheel the fitment remains rub-free.
  • Bolt Pattern Adapters: Want to mount German wheels with a 5x112 bolt pattern (such as OZ Racing or Rotiform wheels that are only available in 5x112)? This is possible using bespoke bolt pattern adapters from 5x114.3 to 5x112 (minimum 15 mm thick). Remember that the effective ET of the wheel decreases by the thickness of the adapter.

4. Frequently Asked Questions (FAQ)

Will 19 inch wheels with ET45 rub on a lowered Hyundai i30 N?
No, provided you choose a wheel width of 8.5J combined with a 235/35 R19 tyre. This combination is the absolute 'sweet spot' for the i30 N and remains rub-free with normal road-lowering up to 30 mm.
Do all 18 inch wheels fit over the large N-Performance brake calipers?
Not all of them! The i30 N Performance has 345 mm front brake discs (and 360 mm on the Facelift) with substantial calipers. Not only the ET, but also the spoke profile and inner diameter of the wheel determine whether the caliper clears. Well-known lightweight options such as Protrack ONE, Motec Nitro, Autec Wizard or OZ Ultraleggera are guaranteed to fit.
Do I need special wheel nuts when fitting a set of aftermarket wheels?
Yes! Hyundai's factory wheels use wheel nuts with a specific seating. Almost all aftermarket wheel brands (such as JR-Wheels, Concaver, Borbet, Sparco) require 60° conical M12x1.5 wheel nuts with a smaller outer diameter (tuner-nuts). Never use the original factory nuts on aftermarket wheels!

Have Your Fitment Checked By The Experts

Unsure about the correct ET, want to know if your dream wheels will clear the N-Performance brakes, or need advice on spacers or lowering for your Hyundai i30 N? Contact the experts at Wheels 'N Customs in Nijkerk directly.

Ask Our Experts For Advice

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl