Wheel Fitment Guide - Hyundai Veloster N (JS 2.0 T-GDI 275 hp Performance Package)

Wheels Fitment Guide - Hyundai Veloster N (JS 2.0 T-GDI 275 hp Performance Package)

Model generation JS Asymmetric Coupe (2018-2022) | 2.0 T-GDI Turbo (275 hp / 378 Nm Overboost) | N Corner Carving Differential & Active Variable Exhaust

Wheels Fitment Guide Hyundai Veloster N JS Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Hyundai Veloster N (JS)?
The Hyundai Veloster N (JS generation, produced from 2018 to 2022 with an original new price of around € 36.000,- to € 41.000,-) is a unique car due to its asymmetrical body with one door on the driver’s side and two doors on the passenger side. With the Performance Package the 2.0-litre T-GDI turbo engine delivers 275 HP and 378 Nm overboost torque, combined with an electronically controlled N Corner Carving limited-slip differential (e-LSD) and a spectacular crackling active flap exhaust. The Veloster N uses the bolt pattern 5x114.3 with a 67.1 mm centre bore and M12x1.5 wheel bolts. From the factory the Veloster N runs on 19-inch alloy wheels with a relatively high offset (8.0J ET55 with 235/35 R19 Pirelli P Zero HN tyres). When selecting aftermarket or trackday wheels (such as 18x8.0J or 19x8.5J with ET45 to ET50) the track width increases, which pairs excellently with Borla/Remus exhaust systems and Maxton Design front splitters. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

The image below shows an original alloy wheel from Hyundai's Performance N division:

Original alloy wheel from Hyundai's N division

1. Factory specifications (OEM) Hyundai Veloster N JS

The values below represent the original factory parameters of the Hyundai Veloster N (JS Performance Package). Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory Value (OEM) Notes & Advice
Bolt Pattern (PCD) 5x114.3 Standard Hyundai N 5-lug bolt circle on the JS platform.
Hub Bore (CB) 67.1 mm Standard Hyundai / Kia N hub bore. Centre rings required for wheels with a larger hub bore (e.g. 73.1 mm).
Wheel Fastening Type M12 x 1.5 Conical Nuts Torque of 110 Nm recommended by Hyundai N.
OEM Wheel Sizes (19" Performance Pack Standard) 8.0J x 19 ET55 Factory 19 inch two-tone alloy wheels in a square setup.
OEM Tyre Sizes 235/35 R19 Supplied on Pirelli P Zero HN (Hyundai N OEM spec) with XL Load Index.

2. Aftermarket Fitment Guide (18" & 19" Veloster N JS)

Do you want to fit your Hyundai Veloster N with a dedicated circuit/trackday wheelset, a wider stance or weight savings using Flow Formed wheels from brands such as Enkei (NT03+M / RPF1), JR-Wheels (JR11 / JR21 / JR30 / SL01), Motec (Ultralight / Nitro), Autec (Wizard), Concaver, OZ Racing (Ultraleggera / Superturismo), Sparco, Remus, Borla or Maxton Styling? Below you will find the ideal sizes for a scratch-free clearance around the 345mm N-Performance brakes.

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal Offset Range Recommended Tyre Size
18 Inch (Lightweight Trackday / Circuit Sweet Spot) Front & Rear (Square) 8.0J / 8.5J ET45 - ET50 235/40 R18 (Semi-slicks Nankang AR-1 / Cup 2)
19 Inch (OEM+ Flush Street Performance Sweet Spot) Front & Rear (Square) 8.0J / 8.5J ET45 - ET50 235/35 R19 (or 245/35 R19)
19 Inch (Aggressive Fast Road & Stance Setup) Front & Rear (Square) 8.5J ET42 - ET45 235/35 R19 (Light stretch on 8.5J)

3. Wheel Spacers & Fitment Determinations for Veloster N JS

Do you want to push the original 19" N factory wheels (8.0J ET55) slightly further out to make them sit flush with the wheel arches?

  • Wheel Spacers (Spacers): On the original 8.0J ET55 factory wheels H&R or Eibach spacers of 12 mm to 15 mm can be fitted at the front and 15 mm to 18 mm at the rear. Use only hub-centric aluminium spacers with the specific 5x114.3 bolt pattern and 67.1 mm hub fitment with extended M12x1.5 wheel stud threads.
  • 345mm N-Performance Caliper Clearance: Because the Veloster N is fitted at the front with red N-Performance calipers and 345 mm discs, when using aftermarket 18 inch wheels you must check that the spokes clear the calipers. An offset between ET45 and ET50 is ideal for aftermarket wheels.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we daily fit wheels, exhaust systems, bodykits and suspension on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):

Part / Operation Labour Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-movers"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT certainty.

How does Wheels 'N Customs' vehicle check and fitment guarantee work?

In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence-plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Remus/Borla exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the terms for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Version restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Hyundai Veloster N (JS 2.0 T-GDI 275 hp Performance Package), would you like advice about 345mm N-Performance brake caliper clearance, Motec / JR-Wheels wheels or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl