Model generation X152 (2013-2020) | 3.0 V6 Supercharged AJ126 (340 hp / 380 hp S - 450 Nm) | Lightweight Aluminium Architecture, Mechanical LSD & Active Sports Exhaust

Why is correct wheel fitment crucial for the Jaguar F-Type Coupé & Convertible (X152)?
The Jaguar F-Type (3.0 V6 Supercharged entry version with 340 HP and the V6 S with 380 HP, produced from 2013 with an original new price of approximately € 68.000,- to € 69.900,-) is one of the most beautifully styled modern British GT sports cars. Powered by the wailing 3.0-litre V6 engine with Roots-type supercharger, active sports exhaust, Quickshift 8-speed automatic and mechanical limited-slip differential on the rear axle, the F-Type V6 offers an unparalleled emotional driving experience. The F-Type (X152) uses the bolt pattern 5x108 with a 63.4 mm centre bore and M12x1.5 wheel bolts. Crucial for the F-Type is the factory-original staggered (wide set) setup with significantly wider wheels and low offsets on the rear axle to fill the wide aluminium hips. Factory-fitted the F-Type comes on 18 inch Vela wheels (8.5J ET49 front & 9.5J ET27 rear) or optional 19/20 inch Maelstrom/Tornado/Gyrodyne wheels (8.5J/9.0J ET49-ET55 front with 245/40 R19 & 9.5J/10.5J ET27-ET38 rear with 275/35 R19 or 295/30 R20 Pirelli P Zero tyres). When selecting aftermarket or custom forged wide sets (such as 20x9.0J ET42-ET49 front & 20x10.5J ET30-ET38 rear from Vossen, Concaver or JR-Wheels) the wheels sit breathtakingly flush with the hips. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The image below shows a white Jaguar F-Type Coupé fitted with a high-quality aftermarket wide set:
The values below represent the original factory parameters of the Jaguar F-Type (X152 3.0 V6 Supercharged 340/380 hp). Use these as a technical reference when purchasing new wheels or wheel spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x108 | Standard Jaguar / Land Rover 5-lug bolt circle on the X152 platform. |
| Centre bore (CB) | 63.4 mm | Standard Jaguar / Ford centre bore. Hub centring rings required for wheels with a larger centre bore (e.g. 67.1 mm or 73.1 mm). |
| Wheel attachment type | M12 x 1.5 Conical Bolts | 125 Nm torque recommended by Jaguar Land Rover. |
| OEM Wheel sizes (18" Standard Staggered Vela) | 8.5J x 18 ET49 Front 9.5J x 18 ET27 Rear |
Factory 18 inch alloy staggered set in RWD configuration. |
| OEM Wheel sizes (19" / 20" Optional Staggered Gyrodyne/Tornado) | 8.5J x 19 ET49 Front / 9.5J x 19 ET27 Rear 9.0J x 20 ET55 Front / 10.5J x 20 ET38 Rear |
Factory 19 & 20 inch polished/black alloy staggered sets on V6 S trims. |
| OEM Tyre sizes | 245/45 R18 Front & 275/40 R18 Rear (18") 245/40 R19 Front & 275/35 R19 Rear (19") 255/35 R20 Front & 295/30 R20 Rear (20") |
Supplied on Pirelli P Zero J (Jaguar OEM spec) or Michelin Pilot Sport 4S with XL Load Index. |
Do you want to fit your Jaguar F-Type Coupé or Convertible with a wider rear axle, an aggressive concave look or weight savings using Flow Formed / Custom Forged wheels from brands such as Vossen (HF-3 / HF-5 / EVO in 5x108), Concaver (CVR1 / CVR2), JR-Wheels (JR21 / JR30 / SL01), BC Forged, OZ Racing, Remus, Quicksilver, Velocity AP or Maxton-styling? Below you can see the ideal sizes for a scratch-free fit around the 380mm Super Performance brakes.
| Wheel size & construction | Position | Recommended Rim Width (J) | Ideal ET Value Range | Recommended Tyre Size |
|---|---|---|---|---|
| 19 Inch (OEM+ Flush Street Performance Wide Set) | Front Rear |
8.5J Front 9.5J or 10.0J Rear |
ET40 - ET49 ET25 - ET32 |
245/40 R19 Front 275/35 R19 Rear |
| 20 Inch (OEM+ Flush Fast Road Wide Set Sweet Spot) | Front Rear |
9.0J Front 10.5J Rear |
ET42 - ET49 ET32 - ET38 |
255/35 R20 Front 295/30 R20 Rear |
| 20 Inch (Aggressive Deep Concave / Wide Breedset) | Front Rear |
9.0J or 9.5J Front 11.0J Rear |
ET38 - ET42 ET28 - ET32 |
255/35 R20 Front 305/30 R20 Rear (Light stretch on 11.0J rear) |
Do you want to push the original 19" or 20" Gyrodyne/Tornado factory wheels (9.0J ET55 / 10.5J ET38) a little further out so they sit flush with the wide aluminium rear hips?
In our spacious and professional workshop in Nijkerk we daily fit wheels, exhaust systems, bodykits and suspension on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Labour Rate (Excl. VAT) | Indicative Labour Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, manufacturer warranty and MOT certainty.
In our webshop you can filter parts by Brand, Type, Variant and Year of Manufacture (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Vossen/Quicksilver exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-order items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Type/Variant restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Jaguar F-Type Coupé or Convertible (X152 3.0 V6 Supercharged 340 hp / 380 hp S), would you like advice on 380mm Super Performance brake caliper clearance, Vossen / Concaver wide sets or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?