Model generation URL10 (2015-2020) | 5.0 V8 Naturally Aspirated 2UR-GSE (477 hp / 530 Nm) | Torque Vectoring Differential (TVD), Quad Stacked Exhausts & Brembo 6-Piston Brakes

Why is correct wheel fitment crucial for the Lexus GS F (URL10)?
The Lexus GS F (URL10 generation, produced from 2015 to 2020 with an original list price of approximately € 68,500 to € 69,900) is an exceptionally rare and characterful Japanese V8 sports saloon. Powered by the legendary 5.0-litre 2UR-GSE naturally aspirated V8 engine with 477 hp and 530 Nm of torque (revving to 7,300 rpm), an 8-speed Sport Direct Shift automatic, electronic Torque Vectoring Differential (TVD with Standard, Slalom and Track modes) and the signature diagonally stacked quad exhaust pipes, the GS F is an absolute dream car for purists. The GS F uses the bolt pattern 5x114.3 with a 60.1 mm hub bore and M12x1.5 conical wheel nuts. Crucial on the GS F is the factory **Staggered (breedset)** setup. From the factory the GS F sits on forged 19 inch 10-spoke BBS wheels (9.0J ET50 front with 255/35 R19 & 10.0J ET41 rear with 275/35 R19 Michelin Pilot Super Sport / Pilot Sport 4S tyres). To accommodate the orange or black 6-piston Brembo calipers and 380 mm perforated floating discs up front, and to fill the muscular wheel arches without rubbing, precise wheel and offset selection is required. At Wheels 'N Customs in Nijkerk, we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the Lexus GS F (URL10 5.0 V8 2UR-GSE). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Explanation & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x114.3 | Standard Lexus F 5-lug bolt circle on the L10 platform. |
| Hub diameter (CB) | 60.1 mm | Standard Toyota / Lexus hub bore. Spigot rings required with wheels that have a larger hub diameter (e.g. 67.1 mm or 73.1 mm). |
| Wheel fastening type | M12 x 1.5 Conical Nuts | Tightening torque of 103 Nm recommended by Lexus F Performance. |
| OEM wheel sizes (19" BBS Forged Hand-Polished Staggered) | 9.0J x 19 ET50 Front 10.0J x 19 ET41 Rear |
Factory 19 inch forged BBS alloy staggered set on RWD layout. |
| OEM Tyre Sizes | 255/35 R19 Front 275/35 R19 Rear |
Supplied on Michelin Pilot Super Sport or Michelin Pilot Sport 4S with XL Load Index. |
Would you like to equip your Lexus GS F with a wider rear axle, deeper concavity or weight savings through Flow Formed / Custom Forged JDM wheels from brands such as Rays VOLK (TE37 / G025 / G16 in 5x114.3), Work Wheels (EMOTION CR 2P / VS-XX), Apex Wheels (VS-5RS / SM-10), Enkei, JR-Wheels (SL01 / JR30), Concaver, Vossen, Apexi, Tom's Racing, Invidia, Remus or Maxton styling? Below are the ideal sizes for rub-free clearance around the 380 mm 6-piston Brembo brakes.
| Inch Size & Build | Position | Recommended Wheel Width (J) | Ideal Offset Range | Recommended Tyre Size |
|---|---|---|---|---|
| 19 Inch (OEM+ Flush Street Performance Staggered Set Sweet Spot) | Front Rear |
9.0J Front 10.0J or 10.5J Rear |
ET35 - ET45 ET38 - ET45 |
255/35 R19 Front 275/35 R19 (or 285/35 R19) Rear |
| 20 Inch (OEM+ Flush Fast Road Staggered Set Sweet Spot) | Front Rear |
9.0J Front 10.0J or 10.5J Rear |
ET35 - ET42 ET38 - ET45 |
255/30 R20 Front 285/30 R20 Rear |
| 20 Inch (Aggressive Deep Concave / Stance Staggered Set) | Front Rear |
9.5J Front 10.5J Rear |
ET32 - ET38 ET35 - ET40 |
255/30 R20 Front 285/30 R20 Rear (Slight stretch with 10.5J rear) |
Do you want to bring the original forged 19" BBS factory wheels (9.0J ET50 / 10.0J ET41) further out to make them sit flush with the GS F's wide arches?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, body kits and suspension on 2 to 5 cars daily. We use transparent fixed rates (excl. VAT):
| Part / Task | Installation Rate (Excl. VAT) | Indicative Installation Time |
|---|---|---|
| Complete Wheel Set Installation & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Lip / Bumper Lip / Splitter Installation | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Installation | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Installation | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Bootlid Spoiler Installation | € 55 - € 80 | 30 - 45 minutes |
| Side Bars Set Installation (Vans / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bull Bars Installation (Vans / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Installation (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a web shop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, install and inspect the parts ourselves on a daily basis, providing you with a 100% fitment guarantee, manufacturer's warranty and APK assurance.
In our web shop you filter parts by Make, Model, Version and Year of manufacture (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order, our specialists carry out a manual check based on your vehicle details and VIN. If in doubt, we will ask you within 48 hours via WhatsApp or e-mail for 1 à 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or installed.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/Tom's, Remus/Invidia exhaust systems and body kits from Maxton Design come with official German TÜV, ECE or ABE certification. This guarantees a hassle-free APK inspection in the Netherlands and vehicle inspection in Belgium.
Under European Directive 2011/83/EU, for online purchases you have the right to withdraw your order within 14 days. Excluded from the right of withdrawal are specially custom-ordered items, custom-drilled wheels (Custom ET/Blank) and mounted wheel-and-tyre sets. When returning incorrectly ordered items without prior verification of Make/Model/Version, restocking fees of 25% to 40% may apply for inspection and re-packaging.
Do you have specific questions about the exact fitment for your Lexus GS F (URL10 5.0 V8 477 hp), would you like advice on 380mm 6-piston Brembo caliper clearance, 19 or 20 inch Rays / Work / BBS / Vossen staggered sets or spacers, or would you like to receive an all-in quotation including workshop installation in Nijkerk?