Wheel Fitment Guide - Lexus IS F (USE20 5.0 V8 423 hp)

Wheels Fitment Guide - Lexus IS F (USE20 5.0 V8 423 hp)

Model generation USE20 (2007-2014) | 5.0 V8 2UR-GSE (423 hp / 505 Nm) | Stacked Quad Exhaust, Torsen LSD & BBS Forged Staggered Setup

Wheels Fitment Guide Lexus IS F USE20 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Lexus IS F (USE20)?
The Lexus IS F (USE20 generation, produced from 2007 to 2014 with an original new price of approximately € 64.000,- to € 68.500,-) is a brutish, naturally aspirated Japanese V8 supersedan. Powered by the sonorous 5.0-litre 2UR-GSE V8 engine with 423 HP and 505 Nm torque, a lightning-fast 8-speed Sport Direct Shift automatic transmission, Torsen mechanical limited-slip differential and the iconic stacked angled quad exhaust tips, the IS F enjoys cult status. The IS F uses the bolt pattern 5x114.3 with a 60.1 mm hub bore and M12x1.5 wheel nuts. Crucial for the IS F is the factory **Staggered (wide-set)** configuration. Factory-fitted the IS F rides on ultra-light forged 19 inch BBS 10-spoke wheels (8.0J ET45 front with 225/40 R19 & 9.0J ET55 rear with 255/35 R19 Michelin Pilot Sport 2/4S tyres). To accommodate the massive 6-piston Brembo calipers with 360 mm drilled discs and to prevent contact with the bulging front arches, an accurate ET value is required. When selecting aftermarket JDM wheels (such as 19x8.5J ET35-ET40 front & 19x9.5J/10.0J ET45-ET50 rear from Rays, Work, Enkei or Apex) track width is increased for even sharper cornering. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

The image below shows a forged aftermarket wheel set with a fitment specifically tuned to the Lexus IS F chassis:

Forged aftermarket wheel fitted to the Lexus IS F USE20 chassis

1. Factory specifications (OEM) Lexus IS F USE20

The values below represent the original factory parameters of the Lexus IS F (USE20 5.0 V8). Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x114.3 Standard Lexus F-Performance 5-lug bolt circle on the XE20 platform.
Hub diameter (CB) 60.1 mm Standard Toyota / Lexus hub bore. Centre rings required for wheels with a larger hub diameter (e.g. 67.1 mm or 73.1 mm).
Wheel attachment type M12 x 1.5 Conical Nuts Torque of 103 Nm recommended by Lexus F-Sport.
OEM Wheel sizes (19" BBS Forged Staggered) 8.0J x 19 ET45 Front
9.0J x 19 ET55 Rear
Factory 19 inch forged BBS alloy staggered set in Smoked Titan finish.
OEM Tyre sizes 225/40 R19 Front
255/35 R19 Rear
Supplied on Michelin Pilot Sport PS2 / Pilot Sport 4S or Bridgestone Potenza RE050A with XL Load Index.

2. Aftermarket Fitment Guide (19" & 20" Lexus IS F USE20)

Do you want to equip your Lexus IS F with a wider rear track, deeper concavity or weight savings using Flow Formed / Forged JDM wheels from brands such as Rays VOLK (TE37 / G25 / ZE40), Work Wheels (EMOTION CR Kiwami / VS-XX), Enkei (RS05RR / GTC02), Apex (EC-7 / VS-5RS), JR-Wheels (SL01 / JR11 / JR30), Concaver, Vossen, Invidia, Joe Z or Maxton Styling? Below you’ll find the ideal sizes for a scratch-free fitment, also when lowered with Eibach, H&R, BC Racing, RR Racing or KW V3 coilovers.

Wheel diameter & construction Position Recommended Wheel Width (J) Ideal ET Value Range Recommended Tyre Size
19 Inch (OEM+ Flush Fast Road Wide-set Sweet Spot) Front
Rear
8.5J Front
9.5J Rear
ET35 - ET40
ET45 - ET50
235/35 R19 Front
265/30 R19 (or 275/30 R19) Rear
19 Inch (Aggressive Trackday / Deep Concave Wide Set) Front
Rear
9.0J Front
10.0J Rear
ET35 - ET38
ET42 - ET48
245/35 R19 Front
275/30 R19 Rear (Optional slight rear fender roll)
20 Inch (Show & Stance Performance Wide Set) Front
Rear
8.5J Front
9.5J Rear
ET38 - ET42
ET45 - ET48
235/30 R20 Front
275/25 R20 Rear

3. Wheel Spacers & Fitting Rules for Lexus IS F

Do you want to push the original forged 19" BBS factory wheels (8.0J ET45 / 9.0J ET55) a bit further out to make them sit flush with the bulging F-fenders and rear hips?

  • Wheel Spacers (Spacers): On the original factory wheels H&R or Eibach spacers from 12 mm to 15 mm can be fitted at the front and 15 mm to 20 mm at the rear. Use only hub-centred aluminium spacers with the specific 5x114.3 bolt pattern and 60.1 mm hub bore, with extended M12x1.5 wheel studs.
  • 6-Piston Brembo Clearance: The IS F is fitted at the front with large black 6-piston Brembo calipers and 360 mm discs. Always check the spoke curvature on aftermarket wheels to ensure the front calipers are not contacted.

4. Fixed Workshop Rates Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Labour Fitting Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Lip Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect parts ourselves daily, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

On our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence-plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are the wheels and parts we fit approved for inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW/RR Racing, Invidia/Joe Z/Remus exhausts and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior inspection of Brand/Type/Specification, restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Lexus IS F (USE20 5.0 V8 423 hp), would you like advice on 6-piston Brembo caliper clearance, Rays / Work / Apex wide sets or wheel spacers, or would you like an all-in quote including workshop installation in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl