Model generation USC10 Coupé (2014-present) | 5.0 V8 Naturally Aspirated 2UR-GSE (477 hp) | Carbon Edition & Track Edition
Why is correct wheel fitment crucial for the Lexus RC F?
The Lexus RC F is a rare sight on European roads, powered by a genuine 5.0 litre naturally aspirated V8 engine with 477 hp. The car uses the bolt pattern 5x114.3 with a 60.1 mm centre bore. The RC F features widened wheel arches and large brakes (380 mm drilled discs with 6‑piston Brembo calipers). Factory‑fitted are 19 inch forged BBS wheels (9.0J ET50 front / 10.0J ET41 rear). When choosing aftermarket alloy wheels the correct ET value and spoke clearance are essential to avoid rubbing against the calipers or arch lips. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and chassis number.
The values below represent the original factory parameters of the Lexus RC F. Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x114.3 | Standard Japanese 5‑lug bolt circle. |
| Centre bore (CB) | 60.1 mm | Lexus/Toyota centre bore. Hub rings required for larger wheel centre holes (e.g. 73.1 mm). |
| Wheel fastening type | M12 x 1.5 Wheel nuts | Flat OEM nuts with washer. Aftermarket wheels require 60‑degree conical M12x1.5 nuts. Tightening torque 103 Nm. |
| OEM Wheel sizes (19" Forged BBS) | Front: 9.0J x 19 ET50 Rear: 10.0J x 19 ET41 |
Factory BBS forged 10‑spoke or hand‑polished wheels. |
| OEM Tyre sizes | Front: 255/35 R19 Rear: 275/35 R19 |
Supplied on Michelin Pilot Super Sport with XL Load Index. |
Do you want to give your Lexus RC F an even tighter fill of the wheelarches, a concave JDM stance or weight savings with Flow Formed / Custom Forged wheels from brands like Rays Volk Racing, BC Forged, Concaver, Rotiform, Vossen, HRE or Maxton-styling? Below you’ll find the ideal sizes for a scratch-free fit, even when lowered with RS-R, Eibach or KW coilovers.
| Rim Size & Construction | Position | Recommended Rim Width (J) | Ideal ET Range | Recommended Tyre Size |
|---|---|---|---|---|
| 19 Inch (OEM+ Flush Street Wideset) | Front Rear |
9.0J / 9.5J 10.0J / 10.5J |
ET32 - ET38 ET35 - ET40 |
255/35 R19 275/35 R19 (or 285/35 R19) |
| 20 Inch (Absolute Sweet Spot Show & Performance) | Front Rear |
9.0J / 9.5J 10.5J |
ET32 - ET35 ET38 - ET42 |
255/30 R20 285/30 R20 (or 295/30 R20) |
| 20 Inch (Exclusive Wide Stance Wideset) | Front Rear |
9.5J 10.5J / 11.0J |
ET30 ET35 - ET38 |
255/30 R20 295/30 R20 (Requires camber adjustment) |
Do you want to push the original 19" BBS factory wheels (9.0J ET50 front / 10.0J ET41 rear) a bit further out to make them sit flush with the wide arches?
In our spacious and professional workshop in Nijkerk we daily fit wheels, exhaust systems, bodykits and suspensions on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Operation | Labour Rate (Excl. VAT) | Indicative Installation Time |
|---|---|---|
| Complete Wheelset Mounting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Lip / Bumper Lip / Splitter Installation | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Installation | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Installation | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Installation | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Installation (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Installation (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of over 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves daily, which gives you 100% fitment guarantee, factory warranty and MOT certainty.
In our webshop you can filter parts by Brand, Type, Version and Year of manufacture (we intentionally do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists carry out a manual check based on your vehicle details and chassis number. If there is any doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Invidia/Remus/Armytrix exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This ensures a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your online order within 14 days. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Version, restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about exact fitment for your Lexus RC F, would you like advice about Brembo 6-piston caliper clearance or widebody sets, or would you like an all-in quote including workshop fitting in Nijkerk?