Wheel Fitment Guide - Maserati MC20 & MC20 Cielo (630 hp)

Wheels Fitment Guide - Maserati MC20 & MC20 Cielo (630 hp)

Model generation MC20 Coupé & Cielo Spyder (2020-present) | 3.0 V6 Twin-Turbo Nettuno Pre-Chamber (630 hp / 730 Nm) | Carbon Monocoque Brembo CCB

Wheels Fitment Guide Maserati MC20 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Maserati MC20 & MC20 Cielo?
The Maserati MC20 (and its open sibling the MC20 Cielo Spyder) marks Maserati’s glorious return to the supercar segment. Powered by the in-house developed 630 HP and 730 Nm 3.0-litre V6 Nettuno engine with Formula 1-inspired pre-chamber combustion and an 8-speed DCT transmission at the rear axle, the MC20 demands extreme precision when selecting wheels. Built on an ultralight carbon-fibre chassis, the MC20 uses the bolt pattern 5x114.3 with a 67.1 mm centre bore and M14x1.5 wheel bolts. Factory-fitted the MC20 wears forged 20 inch wheels in a staggered setup: 9.0J ET37.5 front (with 245/35 ZR20 tyres) and 11.0J ET52 rear (with 305/30 ZR20 tyres). For aftermarket wheels (such as 20/21 inch Novitec or Custom Forged wide sets) a perfectly calculated ET value and sufficient spoke clearance around the massive 390 mm Brembo Carbon Ceramic Brakes with 6-piston calipers is essential to prevent damage to the carbon bodywork. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Brand, Model, Variant, Year of Manufacture and chassis number.

1. Factory specifications (OEM) Maserati MC20 & MC20 Cielo

The values below represent the original factory parameters of the Maserati MC20 and MC20 Cielo. Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory Value (OEM) Notes & Advice
P.C.D. (Pitch Circle Diameter) 5x114.3 Supercar 5-lug bolt circle on the carbon MC20 platform.
Centre Bore (CB) 67.1 mm Specific Maserati hub bore. Hub-centric rings required for wheels with a larger centre bore (e.g. 73.1 mm).
Wheel Fastening Type M14 x 1.5 Conical Bolts 160 Nm tightening torque recommended by Maserati.
OEM Wheel Sizes (20" Birdcage \/ Trident Forged) Front: 9.0J x 20 ET37.5
Rear: 11.0J x 20 ET52
Factory 20-inch forged alloy wheels in a staggered setup in Gloss Black or Diamond Cut.
OEM Tyre Sizes Front: 245\/35 ZR20
Rear: 305\/30 ZR20
Supplied on Bridgestone Potenza Sport or Michelin Pilot Sport Cup 2 with MGT (Maserati OEM spec) and XL load index.

2. Aftermarket Fitment Guide (20"\/20" & 20"\/21" MC20)

Do you want to fit your Maserati MC20 or MC20 Cielo with an even tighter fill of the wide wheel arches, deeper concavity or weight reduction using Custom Forged wheels from brands like Novitec, BC Forged, Brixton Forged, HRE, Vossen, Rotiform or Maxton-styling? Below are the ideal sizes for a scratch-free fit, also when lowered with Novitec sports springs.

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
20"\/20" Inch (OEM+ Flush Street Setup) Front
Rear
9.0J / 9.5J
11.0J / 11.5J
ET30 - ET35
ET42 - ET48
245\/35 R20 (or 255\/35 R20)
305\/30 R20 (or 315\/30 R20)
20"\/21" Inch (Novitec Style Supercar Stance Sweet Spot) Front
Rear
9.5J
12.0J
ET30 - ET35
ET40 - ET45
255\/30 R21 (or 265\/30 R21)
325\/25 R21
21"\/22" Inch (Exclusive Show Performance Wide Set) Front
Rear
9.5J
12.0J / 12.5J
ET28 - ET32
ET38 - ET42
255/30 R21
335/25 R22

3. Wheel Spacers & Fitment Rules for Maserati MC20

Do you want to push the original 20" forged factory wheels (9.0J ET37.5 front / 11.0J ET52 rear) further out to make them sit flush with the hips?

  • Wheel Spacers (Spacers): On the original factory wheels H&R or Novitec spacers of 10 mm to 12 mm at the front and 12 mm to 15 mm at the rear can be fitted. Use only hub-centred aluminium spacers with the specific 5x114.3 bolt pattern and 67.1 mm hub fitment with extended M14x1.5 wheel bolts.
  • Brake Caliper Clearance & Carbon Tub: Because the MC20 is fitted with 390 mm Brembo Carbon Ceramic discs and large 6-piston calipers, the inner profile of custom forged wheels must be calculated precisely.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspensions daily to 2 to 5 cars. We use transparent fixed rates (excl. VAT):

Part \/ Labour Labour Rate (Excl. VAT) Indicative Fitment Time
Complete Wheel Set Fitment & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler \/ Bumper Lip \/ Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension \/ Boot Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vehicles \/ SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-movers"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does Wheels 'N Customs vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence-plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW/Novitec, Capristo/Akrapovi?/Tubistyle exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-order items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Version, restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Maserati MC20 or MC20 Cielo Spyder, would you like advice on 390mm Carbon Ceramic caliper clearance or 20/21 inch Novitec widebody sets, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl