Wheel Fitment Guide: Mazda MX-5 ND / ND2 (2015-Present)

Wheels Fitment Guide: Mazda MX-5 ND / ND2 (2015-Present)

The Ultimate Technical Wheel & Suspension Guide for the MX-5 ND & RF

Want to fit your Mazda MX-5 ND (Softtop or RF, 1.5 or 2.0 SkyActiv-G) with a lightweight set of performance wheels, spacers or a coilover kit? In this official guide from Wheels 'N Customs you'll find the exact OEM factory specifications, safe 16 and 17 inch aftermarket margins, Brembo caliper clearance and lowering advice.

Why is accurate fitment essential for the Mazda MX-5 ND?
The Mazda MX-5 ND is built according to the 'Gram Strategy' principle: lightweight and extremely agile. Factory-fitted the car has narrow wheels with a high ET value (ET45). When choosing aftermarket wheels the unsprung weight is crucial for steering response. In addition, the optional Brembo 4-piston caliper on the 2.0 models requires sufficient space behind the spokes (brake clearance).

1. Original Factory Specifications (OEM Fits)

The OEM specifications below apply to the Mazda MX-5 ND1, ND2 and ND3 (Roadster & RF Hardtop):

Specification Factory Value (OEM) Expert Note
Bolt Pattern (PCD) 4x108 or 4x100 The MX-5 ND uses the compact 4x100 bolt pattern.
Centre Bore (CB) 54.1 mm Specific Mazda/Toyota centre bore; use centring rings for larger hub bores (> 54.1 mm).
OEM Wheel Sizes 16 and 17 Inch 16x19.5J ET45 (1.5L) and 17x7.0J ET45 (2.0L / BBS OEM option).
OEM ET Value ET45 Factory ET keeps the wheels neatly recessed in the wheel arches.
Wheel Fastening M12 x 1.5 Conical (60°) Fastening via M12x1.5 conical wheel nuts.
Torque 108 - 120 Nm Clean and torque to the correct value with a torque wrench.

2. Aftermarket Fitment Guide (What fits safely?)

Want the wheel to sit more flush with the arches or are you after a lightweight set for sporty use? Check the proven combinations:

Size Wheel Width (J) Ideal ET Value Recommended Tyre Size Fitment Character
16 Inch (Lightweight Street) 16x7.0J / 16x8.0J ET35 - ET40 195/50 R16 or 205/50 R16 Super lightweight, optimal comfort and retention of the playful 'Jinba Ittai' dynamics.
17 Inch (Performance / Flush) 17x7.5J / 17x8.0J ET35 - ET40 205/45 R17 or 215/45 R17 Most chosen fitment! Tight sporty look, excellent grip.
17 Inch (Track / Aggressive) 17x9.0J ET40 - ET45 235/40 R17 Aggressive track fitment. Requires minor wheelarch modification or camber with substantial lowering.

3. Wheel Spacers, Hub Adapters & Lowering Advice

The Mazda MX-5 ND comes relatively high from the factory and has a conservative track width. With a few targeted upgrades you can transform the stance and handling.

  • Wheel Spacers (Spacers): Are you running the original 17 inch factory or BBS wheels (17x7.0J ET45)? With a spacer set of 15 mm per side at the front and 20 mm per side at the rear the wheels sit exactly flush with the body. Use only hub-centric spacers (54.1 mm) and longer M12x1.5 extended studs or DRM systems!
  • Lowering (Eibach Pro-Kit / H&R / MeisterR / KW): Lowering helps the MX-5 greatly by reducing the centre of gravity. A drop of 25 mm to 35 mm with Eibach or H&R springs (also in combination with factory Bilstein dampers) combined with a 17x8.0J ET38 wheelset remains completely rub-free.
  • Hub Adapters (4x100 to 5x112 / 5x114.3): Want to fit wheels with a 5-lug bolt pattern? With custom hub adapters of at least 15 to 20 mm thick the bolt pattern can be converted. Note the reduced effective ET value of the wheel due to the adapter thickness.

4. Frequently Asked Questions (FAQ)

Will 17 inch wheels with ET35 rub on a lowered MX-5 ND?
No, provided you choose a rim width of 7.0J to 8.0J combined with 205/45 R17 tyres. An ET35 fitment on an 8.0J rim places the wheel exactly at the outer edge of the wheel arch and stays rub-free with a typical street lowering up to 30 mm.
How do I know if an aftermarket wheel clears the optional Brembo brake package?
The MX-5 2.0 with the optional Brembo package has red 4‑piston calipers that protrude outwards. Not every 16" or 17" wheel has enough spoke clearance. Proven lightweight wheels such as the Enkei RPF1 (only in specific sizes), JR-Wheels JR11/JR3, OZ Ultraleggera and Rays ZE40/TE37 are popular due to their guaranteed caliper clearance.
Do I need to use conical wheel nuts with new alloy wheels?
Yes! Although Mazda’s factory wheels are conical, many aftermarket alloy wheels have a narrower stud hole (tuner-style). We recommend always using new 60° conical M12x1.5 wheel nuts (optionally in a slim tuner version) when fitting new wheels.

Have Your Fitment Checked By The Experts

Unsure about the correct ET, want to know if your dream wheels will clear the Brembo brakes on your MX-5, or need advice on spacers or lowering? Contact the experts at Wheels 'N Customs in Nijkerk directly.

Ask Our Experts For Advice

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl