Wheel Fitment Guide - Mercedes-AMG CLA 45 & CLA 45 S (C118 / X118)

Wheels Fitment Guide - Mercedes-AMG CLA 45 & CLA 45 S 4MATIC+ (C118 / X118)

Model generations C118 Coupe & X118 Shooting Brake (2019-present) | 2.0 Turbo M139 (387 hp & 421 hp CLA 45 S) | AMG Performance 4MATIC+ Widebody

Wheels Fitment Guide Mercedes AMG CLA45 C118 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Mercedes-AMG CLA 45 & CLA 45 S (C118 / X118)?
The Mercedes-AMG CLA 45 and CLA 45 S 4MATIC+ (C118 Coupe & X118 Shooting Brake) are among the fastest four-cylinder sports cars in the world. Powered by the impressive M139 2.0-litre turbo engine with up to 421 hp and AMG Torque Control all-wheel drive (including Drift Mode), the CLA 45 S places very specific demands on wheel choice. The CLA 45 (S) features a pronounced Widebody with widened front wings. The car uses the bolt pattern 5x112 with a 66.6 mm centre bore and M14x1.5 wheel bolts. Factory-fit the CLA 45 S comes on 19 inch (8.5J ET46 on forged cross-spoke wheels with 255/35 R19 tyres). For aftermarket alloys (such as 8.5J or 9.0J widths on 19 or 20 inch) spoke clearance around the large 360 mm 6-piston AMG brakes is essential, combined with a considered offset (ET38–ET45) to properly fill the wide wheel arches. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and chassis number.

1. Factory specifications (OEM) Mercedes-AMG CLA 45 & CLA 45 S C118 / X118

The values below represent the original factory parameters of the Mercedes-AMG CLA 45 & CLA 45 S (C118 Coupé & X118 Shooting Brake). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x112 Standard Mercedes-Benz 5-lug bolt circle on the MFA2 platform.
Centre bore (CB) 66.6 mm Mercedes-Benz hub bore. Centre rings required for larger wheel hub holes (e.g. 73.1 mm).
Wheel fastener type M14 x 1.5 Ball-conical Bolts Tightening torque of 130 Nm recommended by Mercedes-AMG.
OEM Wheel sizes (19" CLA 45 Standard) 8.5J x 19 ET46 Factory 10-spoke two-tone alloy wheels in a square fitment.
OEM Wheel sizes (19" CLA 45 S Cross-Spoke / Aerodynamics) 8.5J x 19 ET46 Factory 19 inch AMG forged matt black Cross-Spoke wheels.
OEM Tyre sizes 255\/35 ZR19 Supplied on Michelin Pilot Sport 4S with XL load index and MO1 (Mercedes-AMG OEM spec) to protect 4MATIC+.

2. Aftermarket Fitment Guide (19" & 20")

Do you want to give your Mercedes-AMG CLA 45 or CLA 45 S C118/X118 a tighter fill of the widebody arches, a sportier stance or weight savings using Flow Formed / Forged wheels from brands such as Concaver, JR-Wheels (SL01 / JR11 / JR30), Rotiform, Veemann, Motec, Borbet, OZ Racing or Maxton-styling? Below you’ll find the ideal sizes for a scratch-free fit, also when lowering with Eibach, H&R or KW coilovers.

Wheel diameter & Construction Position Recommended rim width (J) Ideal ET value range Recommended tyre size
19 Inch (OEM+ Flush Street Performance Sweet Spot) Front & Rear (Square) 8.5J / 9.0J ET40 - ET45 255/35 R19
19 Inch (Aggressive Wide Track Setup) Front & Rear (Square) 9.0J ET38 - ET42 255\/35 R19 (or 265\/35 R19)
20 Inch (Exclusive Show Performance Stance) Front & Rear (Square) 8.5J / 9.0J ET40 - ET45 245\/30 R20 (or 255\/30 R20)

3. Wheel Spacers & Bolt Pattern Adapters for Mercedes-AMG CLA 45 C118

Do you want to push the original 19" AMG wheels (8.5J ET46) slightly further out to make them sit flush with the wide arches?

  • Wheel spacers (Spacers): On the original 8.5J ET46 factory wheels H&R or Eibach spacers from 12 mm to 15 mm can be fitted at the front and 12 mm to 15 mm at the rear. Use only hub-centric aluminium spacers with the specific 66.6 mm hub fitment and extended M14x1.5 wheel bolts.
  • Bolt pattern adapters & Fitment check: Do you have an exclusive custom wheel set in mind with a different bolt pattern (e.g. 5x112 to 5x120)? Bolt pattern adapters address this, but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the total ET value in advance to prevent the tyres hitting the arch liners during suspension compression at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspensions daily on 2 to 5 cars. We use transparent fixed rates (excl. VAT):

Part / Labour Labour rate (Excl. VAT) Indicative fitting time
Complete wheel set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front splitter / Bumper lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side skirts set Fitting € 103 - € 145 60 - 90 minutes
Rear diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof spoiler extension / Boot spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars set Fitting (Commercial vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Outlet (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-movers"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does the vehicle inspection and fitment guarantee from Wheels 'N Customs work?

In our webshop you filter parts by Make, Model, Specification and Year (we consciously do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Remus/Milltek/Akrapovi? exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the terms for cancellation and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to cancel your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-order items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Make/Model/Specification restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Mercedes-AMG CLA 45 or CLA 45 S 4MATIC+ (C118 / X118), would you like advice on AMG 6-piston caliper clearance or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl