Wheel Fitment Guide - Mercedes-AMG GLE 63 & GLE 63 S (V167 / C167)

Wheels Fitment Guide - Mercedes-AMG GLE 63 & GLE 63 S 4MATIC+ (V167 / C167)

Model generations V167 SUV & C167 Coupé (2020-present) | 4.0 V8 BiTurbo M177 (571 hp & 612 hp EQ Boost) | AMG Performance 4MATIC+ Widebody

Wheels Fitment Guide Mercedes AMG GLE63 V167 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Mercedes-AMG GLE 63 & GLE 63 S (V167 / C167)?
The Mercedes-AMG GLE 63 S 4MATIC+ (V167 SUV & C167 Coupé) is the absolute flagship in the High-Performance SUV segment. Powered by the mighty 612 HP and 850 Nm 4.0-litre V8 BiTurbo engine with EQ Boost starter-generator, the GLE 63 S places enormous demands on load capacity (minimum 950-1000 kg per wheel) and wheel composition. The GLE 63 S features a pronounced AMG Widebody with chamfered front wings and prominent wheel arch extensions. The car uses bolt pattern 5x112 with a 66.6 mm centre bore and M15x1.25 (or M14x1.5 depending on construction) wheel bolts. Factory-fitted staggered wide sets include 21 inch (10.0J ET51 front / 11.0J ET47 rear) or optional 22 inch (10.0J ET55 front / 11.5J ET42 rear) and 23 inch wheels (10.0J ET45 front / 11.5J ET47 rear with 285/35 R23 and 325/30 R23 MO1 tyres). For aftermarket wheels in 22 or 23 inch, spoke clearance around the massive 400 mm steel or 420 mm AMG Carbon Ceramic 6-piston brakes is of primary importance. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory Specifications (OEM) Mercedes-AMG GLE 63 & GLE 63 S V167 / C167

The values below represent the original factory parameters for the Mercedes-AMG GLE 63 & GLE 63 S (V167 SUV & C167 Coupé). Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory Value (OEM) Notes & Advice
Bolt Pattern (PCD) 5x112 Standard AMG 5-lug bolt circle on the V167 platform.
Hub Bore (CB) 66.6 mm Mercedes‑Benz hub bore. Centre rings required for larger wheel hub holes (e.g. 73.1 mm).
Wheel Fastening Type M15 x 1.25 / M14 x 1.5 Ball Conical Bolts Torque of 150 Nm recommended by Mercedes‑AMG.
OEM Wheel Sizes (21" GLE 63 Standard Cross-Spoke) Front: 10.0J x 21 ET51
Rear: 11.0J x 21 ET47
Factory AMG Cross‑Spoke two‑tone alloy wheels in a staggered wide set.
OEM Wheel Sizes (22" GLE 63 S Standard Cross-Spoke) Front: 10.0J x 22 ET55
Rear: 11.5J x 22 ET42
Factory 22 inch AMG forged matt black or two‑tone Cross‑Spoke wheels.
OEM Wheel Sizes (23" Option Monoblock / Multi-Spoke) Front: 10.0J x 23 ET45
Rear: 11.5J x 23 ET47
Factory 23 inch AMG forged wheels with ultra‑wide arch fill.
OEM Tyre Sizes Front: 275/45 R21 (285/40 R22 on 22" / 285/35 R23 on 23")
Rear: 315/40 R21 (325/35 R22 on 22" / 325/30 R23 on 23")
Supplied on Michelin Pilot Sport 4 SUV or Continental SportContact 6 with XL Load Index and MO1 (Mercedes‑AMG OEM spec).

2. Aftermarket Fitment Guide (21", 22" & 23")

Want to give your Mercedes‑AMG GLE 63 or GLE 63 S V167/C167 an even tighter fill of the wide widebody arches, deeper concavity or weight savings with Flow Formed / Custom Forged wheels from brands like Concaver, BC Forged, Rotiform, Veemann, Vossen, HRE, Brabus, Urban Automotive or Maxton Styling? Below are the ideal sizes for a scratch‑free fit, including on cars with AMG Ride Control+ air suspension.

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
21 Inch (OEM+ Winter / Comfort Setup) Front
Rear
10.0J
11.0J
ET42 - ET48
ET38 - ET44
275/45 R21
315/40 R21
22 Inch (Absolute Street Performance Sweet Spot) Front
Rear
10.0J / 10.5J
11.5J / 12.0J
ET42 - ET48
ET35 - ET40
285/40 R22
325/35 R22
23 Inch (Exclusive Wide Flush SUV Show Stance) Front
Rear
10.5J
11.5J / 12.0J
ET38 - ET42
ET35 - ET40
285/35 R23 (or 295/35 R23)
325/30 R23 (or 335/30 R23)

3. Wheel Spacers & Bolt Pattern Adapters for Mercedes‑AMG GLE 63 V167

Want to push the original 21", 22" or 23" AMG wheels (10.0J ET55 front / 11.5J ET42 rear on 22 inch) further out to make them sit flush with the wide arches?

  • Wheel Spacers (Spacers): On the original 22" factory wheels you can fit H&R or Eibach spacers from 12 mm to 15 mm at the front and 12 mm to 15 mm at the rear. Use only hub‑centric aluminium spacers with the specific 66.6 mm hub fitment and extended homologated wheel bolts.
  • Bolt Pattern Adapters & Fitment Check: Eyeing an exclusive custom wheel set with a different bolt pattern (e.g. 5x112 to 5x130)? Bolt pattern adapters allow this, but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the final ET in advance to prevent wide rear tyres from contacting the arch edges when compressing at speed.

4. Fixed Workshop Labour Rates Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):

Part / Work Labour Rate (Excl. VAT) Indicative Fitment Time
Complete Wheel Set Fitment & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitment (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does Wheels 'N Customs' vehicle check and fitment guarantee work?

In our webshop you filter parts by Brand, Type, Version and Year of Manufacture (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Capristo/Brabus exhaust systems and bodykits from Maxton Design/Urban Automotive have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Type/Version, restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Mercedes-AMG GLE 63 or GLE 63 S 4MATIC+ (V167 / C167), would you like advice on 420mm AMG Ceramic brake caliper clearance or 4MATIC+ rolling circumference requirements, or would you like an all-in quote including workshop fitment in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl