Wheel Fitment Guide - Mercedes-AMG GT 4-Door Coupé (X290)

Wheel Fitment Guide - Mercedes-AMG GT 4-Door Coupé (X290)

Model generation X290 4-Door Coupé (2018-present) | GT 43 (367 hp), GT 53 (435 hp) & GT 63 / 63 S (585 hp & 639 hp V8) | AMG Performance 4MATIC+ Widebody

Wheel Fitment Guide Mercedes AMG GT 4 Door X290 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Mercedes-AMG GT 4-Door Coupé (X290)?
The Mercedes-AMG GT 4-Door Coupé (Type X290) combines the aggressive DNA of the AMG GT sports car with the functionality of a four-door fastback. Powered by the 3.0-litre inline-six turbo engine (GT 43 with 367 hp / GT 53 with 435 hp) or the mighty 4.0-litre V8 BiTurbo engine (GT 63 with 585 hp / GT 63 S with 639 hp and Drift Mode), the X290 places very specific demands on wheel and tyre sizes. The GT 4-Door features extremely wide AMG wheel arches and broad track widths. The car uses bolt pattern 5x112 with a 66.6 mm hub diameter and M14x1.5 wheel bolts. From the factory, the GT 63 S sits on a pronounced 20 inch (9.5J ET22.5 front / 11.0J ET30 rear) or 21 inch staggered wide setup (10.0J ET25 front / 11.5J ET20 rear on forged Cross-Spoke wheels with 275/35 R21 and 315/30 R21 MO1 tyres). With aftermarket alloys (such as 10.0J or 10.5J front and 11.5J or 12.0J rear on 21 or 22 inch), spoke clearance around the massive 390 mm / 420 mm AMG 6-piston brakes is of primary importance, combined with a strict rolling circumference tolerance to protect the 4MATIC+ system. At Wheels 'N Customs in Nijkerk we pre-check every order based on your selected Make, Model, Version, Year and VIN.

1. Factory specifications (OEM) Mercedes-AMG GT 4-Door Coupé X290

The values below represent the original factory parameters of the Mercedes-AMG GT 4-Door Coupé (X290 GT 43, 53, 63 & 63 S). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Explanation & Advice
Bolt pattern (PCD) 5x112 Standard AMG 5 bolt-hole pitch circle on the X290 platform.
Centre bore (CB) 66.6 mm Mercedes-Benz hub bore. Spigot rings required with larger wheel centre bores (e.g. 73.1 mm).
Wheel fixing type M14 x 1.5 Ball-Seat Bolts Tightening torque of 150 Nm recommended by AMG.
OEM wheel sizes (19" GT 43 / 53 Standard) Front: 9.5J x 19 ET22.5
Rear: 11.0J x 19 ET30
Factory 10-spoke Monoblock-style alloy wheels in staggered wide setup.
OEM wheel sizes (20" GT 63 Standard Cross-Spoke) Front: 9.5J x 20 ET22.5
Rear: 11.0J x 20 ET30
Factory AMG 20 inch Cross-Spoke matt black or two-tone wheels.
OEM wheel sizes (21" GT 63 S Option Forged Cross-Spoke) Front: 10.0J x 21 ET25
Rear: 11.5J x 21 ET20
Factory 21 inch AMG Forged matt black Cross-Spoke wheels.
OEM Tyre Sizes Front: 265/40 R20 (275/35 ZR21 on 21")
Rear: 295/35 R20 (315/30 ZR21 on 21")
Mandatory MO1 (Mercedes-AMG OEM spec) with XL Load Index to protect 4MATIC+.

2. Aftermarket Fitment Guide (20", 21" & 22")

Would you like to equip your Mercedes-AMG GT 4-Door Coupé X290 with an even tighter fit in the wide AMG wheel arches, deep concavity or weight saving through Flow Formed / Custom Forged wheels from brands such as Concaver, BC Forged, Rotiform, Veemann, Vossen, HRE, Brabus or Maxton styling? Below you can see the ideal sizes for a rub-free fit, including on cars with AMG Ride Control+ air suspension.

Inch Size & Construction Position Recommended Rim Width (J) Ideal ET Range Recommended Tyre Size
20 Inch (OEM+ Flush Street Performance Sweet Spot) Front
Rear
9.5J / 10.0J
11.0J / 11.5J
ET18 - ET22
ET22 - ET28
265/40 R20
295/35 R20 (or 305/35 R20)
21 Inch (Absolute Sweet Spot Show & Track Performance) Front
Rear
10.0J
11.5J / 12.0J
ET18 - ET22
ET18 - ET22
275/35 R21
315/30 R21 (or 325/30 R21)
22 Inch (Exclusive Wide Flush Show Stance) Front
Rear
10.0J / 10.5J
11.5J / 12.0J
ET15 - ET20
ET15 - ET20
275/30 R22 (or 285/30 R22)
315/25 R22 (or 325/25 R22)

3. Wheel Spacers & PCD Adapters for Mercedes-AMG GT 4-Door X290

Do you want to push the original 20" or 21" AMG wheels (10.0J ET25 front / 11.5J ET20 rear on 21 inch) a little further out to make them sit flush with the wide fenders?

  • Spacers: On the original 21" factory wheels, H&R or Eibach spacers of 12 mm to 15 mm at the front and 10 mm to 12 mm at the rear can be installed. Use only hub-centric aluminium spacers with the specific 66.6 mm centre bore and extended M14x1.5 wheel bolts.
  • PCD Adapters & Fitment Check: Do you have an exclusive custom wheel set in mind with a different bolt pattern (e.g. 5x112 to 5x120)? PCD adapters solve this, but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the total ET in advance to prevent the wide rear tyres from touching the wheel arch lips under compression at speed.

4. Fixed Installation Rates Nijkerk Workshop

In our spacious and professional workshop in Nijkerk we install wheels, exhaust systems, body kits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Job Installation Rate (Excl. VAT) Indicative Installation Time
Complete Wheel Set Installation & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Installation € 80 - € 120 45 - 60 minutes
Side Skirts Set Installation € 103 - € 145 60 - 90 minutes
Rear Diffuser Installation € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Installation € 55 - € 80 30 - 45 minutes
Sidebars Set Installation (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Installation (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a web shop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, install and inspect the parts ourselves on a daily basis, giving you a 100% fitment guarantee, manufacturer's warranty and MOT assurance.

How does the vehicle check and fitment guarantee from Wheels 'N Customs work?

In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists carry out a manual check based on your vehicle data and chassis number. In case of doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or installed.

Are our fitted wheels and parts approved for inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Capristo/Brabus exhaust systems and body kits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free APK inspection in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

According to European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially custom-ordered items, custom drilled wheels (Custom ET/Blank) and mounted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Version, restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Mercedes-AMG GT 4-Door Coupé (X290 GT 43, 53, 63 or 63 S), would you like advice on 420mm AMG Ceramic caliper clearance or 4MATIC+ rolling circumference requirements, or would you like to receive an all-in quote including workshop installation in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl