Model generation C192 Coupé (2023-present) | GT 55 (476 hp) & GT 63 (585 hp V8 BiTurbo) | AMG Performance 4MATIC+ Widebody

Why is correct wheel fitment crucial for the Mercedes-AMG GT 55 & GT 63 Coupé (C192)?
The second-generation Mercedes-AMG GT Coupé (Type C192) has grown into a more practical 2+2 Performance GT with standard all-wheel drive. Powered by the potent 4.0-litre V8 BiTurbo engine (476 HP in the GT 55 and 585 HP / 800 Nm in the GT 63), the C192 places extremely high demands on wheel and tyre sizes. Equipped with AMG Performance 4MATIC+ and active rear-axle steering, the C192 features a pronounced wide, muscular Widebody. The car uses the bolt pattern 5x112 with a 66.6 mm centre bore and M14x1.5 wheel bolts. Factory-fitted the GT 63 sits on an impressive staggered wide setup of 20 inch (9.5J ET53.5 front / 11.0J ET63 rear) or optional 21 inch forged wheels (9.5J ET53.5 front / 11.0J ET63 rear with 275/35 R21 and 305/30 R21 MO1 tyres). For aftermarket light-alloy wheels (such as 9.5J or 10.0J front and 11.0J or 11.5J rear on 20 or 21 inch) spoke clearance around the massive 390 mm / 420 mm AMG 6-piston brakes is essential, combined with a considered offset (ET42-ET50) to fill the wheel arches optimally and scratch-free. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the Mercedes-AMG GT 55 & GT 63 Coupé (C192). Use these as a technical reference when purchasing new wheels or wheel spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x112 | Standard AMG 5-stud bolt circle on the MSA platform. |
| Centre bore (CB) | 66.6 mm | Mercedes‑Benz hub bore. Use hub-centric rings when fitting wheels with larger centre bores (e.g. 73.1 mm). |
| Wheel fastening type | M14 x 1.5 Ball conical bolts | Torque of 150 Nm recommended by AMG. |
| OEM Wheel sizes (20" GT 55 / 63 Standard Multi-Spoke) | Front: 9.5J x 20 ET53.5 Rear: 11.0J x 20 ET63 |
Factory AMG 10-twin-spoke or multi-spoke two-tone wheels. |
| OEM Wheel sizes (21" GT 63 Option Cross-Spoke Forged) | Front: 9.5J x 21 ET53.5 Rear: 11.0J x 21 ET63 |
Factory 21-inch AMG forged matte black or gold Cross-Spoke wheels. |
| OEM Tyre sizes | Front: 275/40 R20 (275/35 ZR21 on 21") Rear: 295/35 R20 (305/30 ZR21 on 21") |
Must be fitted with MO1 (Mercedes‑AMG OEM spec) with XL load index to protect 4MATIC+. |
Do you want to give your Mercedes‑AMG GT 55 or GT 63 Coupé C192 a tighter fill of the wide AMG arches, a deep concave look or save weight with Flow Formed / Custom Forged wheels from brands such as Concaver, BC Forged, Rotiform, Veemann, Vossen, HRE, Brabus or Maxton Styling? Below are the ideal sizes for a scratch‑free fit, also for cars equipped with AMG Active Ride Control suspension.
| Wheel diameter & construction | Position | Recommended wheel width (J) | Ideal ET value range | Recommended tyre size |
|---|---|---|---|---|
| 20 Inch (OEM+ Flush Street Performance Sweet Spot) | Front Rear |
9.5J 11.0J |
ET42 - ET48 ET48 - ET52 |
275/40 R20 295/35 R20 (or 305/35 R20) |
| 21 Inch (Absolute Sweet Spot Show & Track Performance) | Front Rear |
9.5J / 10.0J 11.0J / 11.5J |
ET42 - ET46 ET46 - ET50 |
275/35 R21 305/30 R21 (or 315/30 R21) |
| 21 Inch (Aggressive Wide Flush Show Stance) | Front Rear |
10.0J 11.5J / 12.0J |
ET38 - ET42 ET42 - ET46 |
275/35 R21 315/30 R21 |
Want to push the original 20" or 21" AMG wheels (9.5J ET53.5 front / 11.0J ET63 rear on 21 inch) slightly further out to sit flush with the wide arches?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):
| Component / Service | Fitting Rate (Excl. VAT) | Indicative Fitting Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Lip Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Tip (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.
In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence-plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Capristo/Brabus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a worry-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially ordered custom items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Version restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Mercedes-AMG GT 55 or GT 63 Coupé (C192), would you like advice on 420mm AMG Ceramic brake caliper clearance or 4MATIC+ rolling circumference requirements, or would you like an all-in quote including workshop fitting in Nijkerk?