Model generation R172 (2016-2020) | 3.0 V6 M276 Biturbo (367 hp / 390 hp Facelift - 520 Nm) | AMG SPEEDSHIFT 9G-TRONIC, AMG RIDE CONTROL & Staggered Setup

Why is correct wheel fitment crucial for the Mercedes-AMG SLC 43 (R172)?
The Mercedes-AMG SLC 43 (R172 generation with the turbocharged 3.0-litre V6 Biturbo engine, produced from 2016 to 2020 with an original list price of approximately € 67,500 to € 69,800) redefined the SLK family into the streamlined SLC range. Powered by the fiery M276 V6 Biturbo engine (367 hp on the pre-facelift or 390 hp and 520 Nm of torque after the 2018 update), a lightning-fast 9G-TRONIC automatic, AMG RIDE CONTROL sports suspension and the sporty AMG exhaust system, the SLC 43 sprints to 100 km/h in 4.7 seconds. The R172 SLC 43 uses the Mercedes bolt pattern 5x112 with a 66.6 mm centre bore and M12x1.5 conical wheel bolts. Crucial for the SLC 43 is the factory **Staggered (wide setup)** configuration. From the factory the SLC 43 sits on 18 inch AMG 10-spoke wheels in Titanium Grey or Gloss Black (8.0J ET43 front with 235/40 R18 & 9.0J ET41.5 rear with 255/35 R18 Continental SportContact 5P / Michelin Pilot Sport 4S tyres). To house the silver AMG calipers and 360 mm perforated discs up front and to fill the track width, precise wheel selection is required. At Wheels 'N Customs in Nijkerk we pre-check every order based on your selected Make, Model, Trim, Year and VIN.
The values below represent the original factory parameters of the Mercedes-AMG SLC 43 (R172 3.0 V6 M276 Biturbo). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory Value (OEM) | Explanation & Advice |
|---|---|---|
| Bolt Pattern (PCD) | 5x112 | Standard Mercedes-Benz 5-lug bolt circle on the R172 platform. |
| Centre Bore (CB) | 66.6 mm | Standard Mercedes-Benz centre bore. Hub rings required for wheels with a larger centre bore (e.g. 73.1 mm). |
| Wheel Fastening Type | M12 x 1.5 Conical Bolts | Tightening torque of 130 Nm recommended by Mercedes-AMG GmbH. |
| OEM Wheel Sizes (18" AMG Staggered 10-Spoke / Multi-Spoke) | 8.0J x 18 ET43 Front 9.0J x 18 ET41.5 Rear |
Factory 18 inch AMG alloy staggered set on RWD setup. |
| OEM Tyre Sizes | 235/40 R18 Front 255/35 R18 Rear |
Supplied on Continental SportContact 5P MO (Mercedes OEM spec) or Michelin Pilot Sport 4S with XL Load Index. |
Would you like to equip your Mercedes-AMG SLC 43 with a wider rear track, deeper concavity or weight savings through Flow Formed / Custom Forged wheels from brands such as BBS (CH-R / CI-R in 5x112), Lorinser, Carlsson, OZ Racing (Ultraleggera HLT / Superturismo LM), JR-Wheels (JR21 / JR30 / SL01), Concaver, Piecha Design, HMS Tuning, Capristo or Maxton styling? Below are the ideal sizes for a contact-free fit around the 360 mm 4-piston AMG brakes.
| Wheel Size & Configuration | Position | Recommended Wheel Width (J) | Ideal Offset Range (ET) | Recommended Tyre Size |
|---|---|---|---|---|
| 18 Inch (OEM+ Flush Street Performance Staggered Set Sweet Spot) | Front Rear |
8.0J or 8.5J Front 9.0J or 9.5J Rear |
ET38 - ET43 ET32 - ET41.5 |
235/40 R18 Front 255/35 R18 Rear |
| 19 Inch (OEM+ Flush Fast Road Staggered Set Sweet Spot) | Front Rear |
8.5J Front 9.5J Rear |
ET35 - ET40 ET30 - ET36 |
235/35 R19 Front 265/30 R19 Rear |
| 19 Inch (Aggressive Deep Concave / Stance Staggered Set) | Front Rear |
8.5J Front 10.0J Rear |
ET32 - ET38 ET28 - ET34 |
235/35 R19 Front 265/30 R19 Rear (Slight stretch on 10.0J rear) |
Do you want to push the original 18" AMG factory wheels (8.0J ET43 / 9.0J ET41.5) a little further out to make them sit flush with the SLC 43’s bodywork?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, body kits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):
| Part / Job | Installation Rate (Excl. VAT) | Indicative Installation Time |
|---|---|---|
| Complete Wheel Set Installation & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Installation | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Installation | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Installation | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Installation | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Installation (Vans / SUVs) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Installation (Vans / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Installation (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you a 100% fitment guarantee, manufacturer’s warranty and APK assurance.
In our webshop you filter parts by Make, Model, Variant and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order, our specialists carry out a manual check based on your vehicle details and VIN. If in doubt, we will ask you within 48 hours via WhatsApp or e-mail for 1 à 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Piecha/HMS Tuning exhaust systems and body kits from Maxton Design come with official German TÜV, ECE or ABE certification. This guarantees a hassle-free APK inspection in the Netherlands and vehicle inspection in Belgium.
Under European Directive 2011/83/EU, for online purchases you have the right to withdraw your order within 14 days. Excluded from the right of withdrawal are specially custom-ordered items, custom-drilled wheels (Custom ET/Blank) and assembled wheel-and-tyre sets. When returning incorrectly ordered items without prior verification of Make/Model/Variant, restocking fees of 25% to 40% may apply for inspection and re-packaging.
Do you have specific questions about the exact fitment for your Mercedes-AMG SLC 43 (R172 3.0 V6 Biturbo 367 hp / 390 hp), would you like advice on 360mm 4-piston AMG caliper clearance, 18 or 19 inch BBS / Lorinser / Carlsson staggered sets or spacers, or would you like to receive an all-in quotation including workshop fitting in Nijkerk?