Wheel Fitment Guide - Mercedes-Benz SLK 55 AMG (R172 5.5 V8 Naturally Aspirated 421 hp)

Wheel Fitment Guide - Mercedes-Benz SLK 55 AMG (R172 5.5 V8 Naturally Aspirated)

Model generation R172 (2012-2016) | 5.5 V8 M152 Naturally Aspirated (421 hp / 540 Nm) | AMG SPEEDSHIFT 7G-TRONIC, Magic Sky Control & AMG Sports Suspension

Wheel Fitment Guide Mercedes SLK 55 AMG R172 Wheels N Customs Nijkerk Logo

Why is a correct wheel fitment crucial for the Mercedes-Benz SLK 55 AMG (R172)?
The Mercedes-Benz SLK 55 AMG (R172 generation with the rare 5.5-litre naturally aspirated V8 engine, produced from 2012 to 2016 with an original new price of approximately € 68,500 to € 69,800) is a unique phenomenon: a compact two-seat roadster with a retractable hardtop and a burbling naturally aspirated M152 V8 up front. With 421 HP, 540 Nm of torque, AMG Cylinder Management (deactivation of 4 cylinders under partial load), AMG SPEEDSHIFT 7G-TRONIC transmission and the well-known quad-pipe AMG exhaust system, the SLK 55 AMG accelerates from 0-100 km/h in 4,6 seconds. The R172 SLK 55 AMG uses the Mercedes PCD 5x112 with a 66.6 mm centre bore and M12x1.5 conical wheel bolts. Crucial on the SLK 55 AMG is the factory **Staggered (breedset)** setup with significantly lower offsets on the rear axle. From factory the SLK 55 sits on 18 inch AMG 5-spoke wheels in Titanium Grey or Matt Black (8.0J ET42 front with 235/40 R18 & 9.0J ET36 rear with 255/35 R18 Continental SportContact 5P / Michelin Pilot Sport 4S tyres). To house the silver or red 6-piston AMG High Performance calipers and 360 mm drilled discs up front and to fill the arches without rubbing, precise wheel selection is required. At Wheels 'N Customs in Nijkerk we pre-check every order based on your selected Make, Model, Version, Year of manufacture and VIN.

1. Factory Specifications (OEM) Mercedes-Benz SLK 55 AMG R172

The values below represent the original factory parameters of the Mercedes-Benz SLK 55 AMG (R172 5.5 V8 M152). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory Value (OEM) Explanation & Advice
PCD 5x112 Standard Mercedes-Benz 5-lug bolt circle on the R172 platform.
Hub Diameter (CB) 66.6 mm Standard Mercedes-Benz centre bore. Hub rings required for wheels with a larger hub diameter (e.g. 73.1 mm).
Wheel Fastening Type M12 x 1.5 Conical Bolts Tightening torque of 130 Nm recommended by Mercedes-AMG GmbH.
OEM Wheel Sizes (18" AMG Staggered 5-Spoke / Multi-Spoke) 8.0J x 18 ET42 Front
9.0J x 18 ET36 Rear
Factory 18 inch AMG alloy staggered set on RWD layout.
OEM Tyre Sizes 235/40 R18 Front
255/35 R18 Rear
Supplied on Continental SportContact 5P MO (Mercedes OEM spec) or Michelin Pilot Sport 4S with XL Load Index.

2. Aftermarket Fitment Guide (18" & 19" SLK 55 AMG R172)

Do you want to equip your Mercedes-Benz SLK 55 AMG with a wider rear track, deeper concavity or weight savings via Flow Formed / Custom Forged wheels from brands such as BBS (CH-R / CI-R in 5x112), Lorinser, Carlsson, OZ Racing (Ultraleggera HLT / Superturismo LM), JR-Wheels (JR21 / JR30 / SL01), Concaver, Piecha Design, HMS Tuning, Capristo or Maxton styling? Below you will find the ideal sizes for rub-free fitment around the 360mm 6-piston AMG brakes.

Inch Size & Configuration Position Recommended Rim Width (J) Ideal Offset (ET) Range Recommended Tyre Size
18 Inch (OEM+ flush street performance staggered set sweet spot) Front
Rear
8.0J or 8.5J Front
9.0J or 9.5J Rear
ET35 - ET42
ET30 - ET36
235/40 R18 Front
255/35 R18 Rear
19 Inch (OEM+ flush fast road staggered set sweet spot) Front
Rear
8.5J Front
9.5J Rear
ET35 - ET40
ET30 - ET36
235/35 R19 Front
265/30 R19 Rear
19 Inch (Aggressive deep concave / stance staggered set) Front
Rear
8.5J Front
10.0J Rear
ET32 - ET38
ET28 - ET34
235/35 R19 Front
265/30 R19 Rear (Light stretch with 10.0J rear)

3. Wheel Spacers & Fitment Requirements for SLK 55 AMG

Do you want to bring the original 18" AMG factory wheels (8.0J ET42 / 9.0J ET36) a little further out to sit flush with the SLK 55’s bodywork?

  • Wheel spacers: On the original factory wheels you can fit H&R, Eibach or Lorinser spacers of 10 mm to 12 mm at the front and 12 mm to 15 mm at the rear. Use only hub-centric aluminium spacers with the specific 5x112 bolt pattern and 66.6 mm centre bore with extended M12x1.5 conical wheel bolts.
  • 360mm 6-piston AMG clearance: The SLK 55 AMG features 6-piston AMG calipers and 360 mm perforated discs up front. When selecting aftermarket 18 or 19 inch alloy wheels, ample spoke clearance around the front calipers is required.

4. Fixed Installation Rates Workshop Nijkerk

In our spacious, professional workshop in Nijkerk we fit wheels, exhaust systems, body kits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Activity Installation Rate (Excl. VAT) Indicative Installation Time
Complete wheel set fitting & balancing € 75 - € 115 45 - 60 minutes
Front spoiler / bumper lip / splitter fitting € 80 - € 120 45 - 60 minutes
Side skirts set fitting € 103 - € 145 60 - 90 minutes
Rear diffuser fitting € 95 - € 145 45 - 75 minutes
Roof spoiler extension / boot lid spoiler fitting € 55 - € 80 30 - 45 minutes
Sidebars set fitting (Vans / SUV) € 145 - € 185 60 - 90 minutes
Bull bars fitting (Vans / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust hookup (axle-back / cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a web shop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, install and check the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and APK assurance.

How does the Wheels 'N Customs vehicle check and fitment guarantee work?

In our webshop you filter parts by Make, Model, Variant and Year (we deliberately do not use a number plate filter to avoid incorrect database links). After placing your order, our specialists perform a manual check based on your vehicle details and VIN. If in doubt, we will request 1 à 2 photos of your brakes or wheel arches within 48 hours via WhatsApp or e-mail. Only after 100% approval will your order be processed or installed.

Are our fitted wheels and parts approved for the inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Piecha/HMS Tuning exhaust systems and body kits from Maxton Design come with official German TÜV, ECE or ABE certification. This ensures a hassle-free APK inspection in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially custom-ordered items, custom-drilled wheels (Custom ET/Blank) and mounted wheel-and-tyre sets. When returning incorrectly ordered items without prior verification of Make/Model/Variant, restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Mercedes-Benz SLK 55 AMG (R172 5.5 V8 Naturally Aspirated 421 hp), would you like advice on 360mm 6-piston AMG caliper clearance, 18 or 19 inch BBS / Lorinser / Carlsson staggered sets or spacers, or would you like to receive an all-in quotation including workshop installation in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl