Wheel Fitment Guide: Mercedes-Benz C-Class W205 (2014-2021)

Wheels Fitment Guide: Mercedes-Benz C-Class W205 (2014-2021)

The Ultimate Technical Wheel & Suspension Guide for the Mercedes C-Class W205

Planning to fit a staggered setup, spacers or a lowering kit to your Mercedes-Benz C-Class (W205 Sedan, S205 Estate, C205 Coupé or A205 Cabriolet)? In this official guide from Wheels 'N Customs you’ll find all factory specifications, 18 to 20 inch staggered combinations, C 43 / C 63 AMG brake caliper clearance and lowering advice.

Why is precise fitment essential on the Mercedes C-Class W205?
The W205 generation is known for very tight front wheelarch clearance around the upper control arm and steering knuckle. From factory Mercedes uses very high ET values on the rear axle (up to ET56). If you choose an aftermarket rear wheel with too low an ET value (e.g. ET35), the wheel will protrude too far out and the tyre will rub the arch lip when compressing.

1. Original Factory Specifications (OEM Fits)

The OEM specifications below apply to the Mercedes C-Class W205/S205/C205 (Avantgarde, AMG Line & C 43 AMG):

Specification Factory Value (OEM) Expert Note
Bolt Pattern (PCD) 5x112 Standard Mercedes-Benz 5-stud bolt pattern.
Centre Bore (CB) 66.6 mm Standard Mercedes centre bore; use centring rings for larger hub holes (> 66.6 mm).
OEM Wheel Sizes 17, 18 and 19 Inch (Staggered) 17" (Avantgarde), 18" (AMG Line 7.5J ET44 / 8.5J ET49), 19" (AMG Multi-spoke 7.5J ET44 / 8.5J ET52).
OEM ET-Value Range ET44 (Front) / ET49 - ET56 (Rear) Factory 7.5Jx19 ET44 front and 8.5Jx19 ET52 rear on the AMG Line/C 43 AMG.
Wheel Fixing M14 x 1.5 Ball Conical (R14) Note: OEM wheels use ball-conical bolts. Aftermarket wheels almost always require 60° conical bolts!
Tightening Torque 130 Nm Tighten to the correct prescribed torque with a calibrated torque wrench.

2. Aftermarket Fitment Guide (What fits safely?)

Mercedes owners choose a staggered setup for the W205 in large numbers. See the recommended aftermarket combinations:

Size Setup Wheel Width (J) Ideal ET Value Recommended Tyre Size Fitment Character
18 Inch (Staggered AMG Line) Front: 18x8.0J
Rear: 18x9.0J
Front: ET42 - ET45
Rear: ET48 - ET52
Front: 225/45 R18
Rear: 245/40 R18 or 255/40 R18
Comfortable daily setup, sits nicely flush, 100% rub-free.
19 Inch (Wide-set Performance) Front: 19x8.5J
Rear: 19x9.5J
Front: ET42 - ET45
Rear: ET48 - ET52
Front: 225/40 R19
Rear: 255/35 R19
Most chosen W205 option! Great balance between looks and ride comfort.
20 Inch (Show & Stance) Front: 20x8.5J
Rear: 20x9.5J / 20x10.0J
Front: ET42 - ET45
Rear: ET50 - ET55
Front: 225/35 R20
Rear: 255/30 R20 or 265/30 R20
Exclusive stance look. Visually maximally filled wheelarches.

3. Spacers, Hub Adapters & Lowering Advice

The Mercedes-Benz C-Class W205 has a streamlined silhouette by default, but even with AMG-Line it sits relatively high on the wheels with a somewhat conservative track width.

  • Spacers (Wheel Spacers): Are you running the original AMG-Line 18" or 19" wheels (ET44 front / ET52 rear)? With a spacer set of 10 mm to 12 mm per side at the front and 12 mm to 15 mm per side at the rear the factory wheels will sit exactly flush with the bodywork. Use only hub-centric spacers (66.6 mm) and extended M14x1.5 wheel bolts!
  • Lowering (AIRBODY CONTROL / Eibach Pro-Kit / H&R): On models with the optional AIRBODY CONTROL (air suspension) the chassis can be lowered by 20 to 25 mm via drop links (lowering links) or software. For coil and spring-sprung versions Eibach or H&R lowering springs are the solution. In combination with a 19x8.5J ET45 / 19x9.5J ET50 wide-set the fitment remains 100% rub-free.
  • Hub Adapters: Want to fit wheels with a different bolt pattern (such as BMW's 5x120 or Japanese brands' 5x114.3)? This is possible using custom hub adapters at least 15 mm thick. Remember that the effective ET of the wheel decreases by the thickness of the adapter.

4. Frequently Asked Questions (FAQ)

Do 19 inch wide-sets with ET45 front and ET50 rear rub on a lowered C-Class W205?
No, provided you choose the recommended tyre sizes 225/40 R19 front and 255/35 R19 rear. This combination is the golden standard for the W205 and remains rub-free, even with a 30 mm lowering using lowering springs.
How do I know if an aftermarket wheel fits a C 43 AMG?
The C 43 AMG has large 4-piston AMG brake calipers and very little space between the inner front wing and the steering knuckle. Wheels for a C 43 AMG must have the exact correct ET on the front axle (ET42-45 on 8.5J) and sufficient spoke clearance (brake clearance). If in doubt, always ask our specialists for advice.
Do I need to use conical wheel bolts with new aftermarket wheels?
Yes! Mercedes-Benz factory wheels use ball-conical (R14) bolts. Almost all aftermarket wheel manufacturers (such as Concaver, JR-Wheels, Rotiform, Borbet, GMP, Riviera) use a 60° conical bolt seat. Fitting the factory bolts to conical aftermarket wheels can cause damage or the wheel coming loose.

Have Your Fitment Checked By The Experts

Unsure about the correct ET for your W205 wide-set, want to know if your dream wheels will clear the C 43 AMG brakes, or looking for advice on a suitable lowering kit for your C-Class? Contact the experts at Wheels 'N Customs in Nijkerk directly.

Ask Our Experts For Advice

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl