Model generations CBA-R35, DBA-R35 & EBA-R35 (2007-present) | 3.8 V6 Bi-Turbo VR38DETT (485 hp up to 600 hp Nismo) | ATTESA E-TS AWD Transaxle

Why is correct wheel fitment crucial for the Nissan GT-R (R35)?
The Nissan GT-R (R35), also known as "Godzilla", is a legendary supercar famed for its brutal acceleration and astonishing AWD grip. The advanced ATTESA E-TS all-wheel drive system requires very precise matching of rolling circumference between front and rear tyres to avoid overheating the transaxle clutch. The GT-R uses the Japanese bolt pattern 5x114.3 with a centre bore of 66.1 mm. From factory Nissan supplies wide 20 inch wheels (9.5J front / 10.5J rear). When choosing aftermarket alloys, spoke clearance over the solid 380 mm to 410 mm Brembo 6-piston brakes is essential. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and chassis number.
The values below represent the original factory parameters of the Nissan GT-R R35. Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x114.3 | Standard Japanese 5-lug bolt circle. |
| Centre bore (CB) | 66.1 mm | Specific Nissan centre bore. Hub rings required for larger wheel centre holes (e.g. 73.1 mm). |
| Wheel fastening type | M12 x 1.25 Wheel nuts | Conical 60-degree nuts on aftermarket wheels. Tightening torque 132 Nm. |
| OEM wheel sizes (20" CBA / DBA) | Front: 9.5J x 20 ET45 Rear: 10.5J x 20 ET25 |
Factory RAYS Forged 10-spoke forged wheels. |
| OEM Wheel Sizes (20" Nismo / Track Ed.) | Front: 10.0J x 20 ET41 Rear: 10.5J x 20 ET22 |
Factory RAYS forged Nismo wheels. |
| OEM Tyre Sizes | Front: 255/40 ZR20 Rear: 285/35 ZR20 |
Mandatory fitment of Dunlop SP Sport Maxx GT600 or Michelin Pilot Super Sport NR1. |
Do you want to equip your Nissan GT-R R35 with an even wider, more concave track or save weight with forged Custom Forged wheels from brands like Rays Volk Racing (TE37 / G025), BC Forged, Concaver, Rotiform, HRE or Nismo/Maxton-style? Below you will find the ideal sizes for a scratch-free fit, also when lowered with KW HAS, Eibach or H&R lowering springs.
| Wheel Diameter & Construction | Position | Recommended Rim Width (J) | Ideal ET Value Range | Recommended Tyre Size |
|---|---|---|---|---|
| 20 Inch (Flush Street & Trackday Wide Set) | Front Rear |
10.0J 11.0J / 11.5J |
ET30 - ET35 ET15 - ET20 |
285/35 R20 315/30 R20 (or 325/30 R20) |
| 20 Inch (Aggressive Deep Concave Track) | Front Rear |
10.5J 11.5J / 12.0J |
ET25 - ET28 ET12 - ET15 |
285/35 R20 325/30 R20 |
| 21 Inch (Exclusive Show Stance Wide Set) | Front Rear |
10.0J / 10.5J 11.5J / 12.0J |
ET30 - ET33 ET15 - ET18 |
275/30 R21 (or 285/30 R21) 325/25 R21 (or 335/25 R21) |
Do you want to push the original 20" RAYS factory wheels (9.5J ET45 front / 10.5J ET25 rear) further outwards to make them sit flush with the wide arches?
In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspensions daily on 2 to 5 cars. We use transparent fixed rates (excl. VAT):
| Part / Labour | Fitting Rate (Excl. VAT) | Indicative Fitting Time |
|---|---|---|
| Complete Wheelset Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Vans / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Vans / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer’s warranty and MOT (APK) certainty.
In our webshop you filter parts by Brand, Model, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, HKS/Milltek/Akrapovi? exhaust systems and bodykits have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT (APK) in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-order items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Model/Version restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Nissan GT-R (R35), would you like advice on ATTESA E-TS 4WD rolling circumference or Brembo/Nismo caliper clearance, or would you like an all-in quote including workshop fitting in Nijkerk?