Wheel Fitment Guide - Opel Corsa OPC (E 1.6 Turbo 207 hp Performance Package)

Wheels Fitment Guide - Opel Corsa OPC (E 1.6 Turbo 207 hp Performance Package)

Model generation Corsa E OPC (2015-2019) | 1.6 Turbo (207 hp / 280 Nm Overboost) | Drexler Mechanical LSD, Koni FSD Dampers & Remus Exhaust

Wheels Fitment Guide Opel Corsa OPC E Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Opel Corsa OPC (E)?
The Opel Corsa OPC E (produced from 2015 to 2019 with an original new price of approximately € 28.000,- to € 32.000,-) is the undisputed king among compact Opel Performance models. Powered by the feisty 1.6‑litre turbo engine with 207 hp and 280 Nm overboost torque, combined with a Remus-designed exhaust system and Koni FSD shock absorbers, the Corsa E OPC delivers maximum track performance. The car uses the 5x110 bolt pattern with a 65.1 mm centre bore and M12x1.5 wheel bolts. Factory-fitted, the Corsa OPC E comes on 17 inch alloy wheels (7.0J ET44 with 215/45 R17 tyres) or the optional 18 inch alloy wheels (7.5J ET45 with 215/40 R18 Michelin Pilot Super Sport tyres on the Performance Package). Versions with this optional Performance Package also feature a Drexler mechanical multi-plate limited-slip differential and solid 330 mm ventilated Brembo discs at the front. When selecting aftermarket wheels (such as 18x7.5J or 18x8.0J with ET38 to ET42) the spoke clearance around the Brembo calipers is essential. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and chassis number.

1. Factory Specifications (OEM) Opel Corsa OPC E

The values below represent the original factory parameters of the Opel Corsa OPC E (1.6 Turbo 207 hp). Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory Value (OEM) Notes & Advice
Bolt Pattern (PCD) 5x110 Sporty 5-bolt circle on the reinforced Corsa E OPC platform.
Centre Bore (CB) 65.1 mm Standard Opel / GM hub bore. Centre rings are required for wheels with a larger centre bore (e.g. 67.1 mm or 73.1 mm).
Wheel Fastening Type M12 x 1.5 Conical Bolts Tightening torque of 110 Nm recommended by Opel Performance Center.
OEM Wheel Sizes (17" Standard OPC 5-Spoke) 7.0J x 17 ET44 Factory 17 inch alloy wheels in a square setup.
OEM Wheel Sizes (18" Performance Pack Bi-Color) 7.5J x 18 ET45 Factory 18 inch 5-Y-spoke alloy wheels on the Performance Package.
OEM Tyre Sizes 215/45 R17 (on 17") / 215/40 R18 (on 18") Supplied on Michelin Pilot Super Sport or Continental SportContact 5 with XL load index.

2. Aftermarket Fitment Guide (17" & 18" Corsa OPC E)

Do you want to give your Opel Corsa OPC E a wider track, a sportier stance or weight savings using Flow Formed wheels from brands like JR-Wheels (JR11 / JR21 / JR30 / SL01), Concaver, OZ Racing (Formula HLT / Ultraleggera / Superturismo LM), Motec (Ultralight), Autec (Wizard), Rotiform, Sparco, Remus, Friedrich Motorsport or Maxton-styling? Below are the ideal sizes for a scratch-free fit, also when lowered with Eibach, H&R or KW V1/V3 coilovers.

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
17 Inch (Lightweight Trackday / Winter Setup) Front & Rear (Square) 7.0J / 7.5J ET38 - ET42 215/45 R17 (Semi-slicks Nankang NS-2R / Cup 2)
18 Inch (OEM+ Flush Street Performance Sweet Spot) Front & Rear (Square) 7.5J / 8.0J ET38 - ET42 215/40 R18 (or 225/35 R18)
18 Inch (Aggressive Fast Road & Stance Setup) Front & Rear (Square) 8.0J ET35 - ET38 215/40 R18 (Slight stretch on 8.0J)

3. Wheel Spacers & Fitment Rules for Corsa OPC E

Do you want to push the original 17" or 18" OPC factory wheels (7.0J/7.5J ET44/45) further out so they sit flush with the arches?

  • Wheel Spacers: On the original factory wheels, H&R or Eibach spacers from 12 mm to 15 mm can be fitted at the front and 15 mm to 18 mm at the rear. Use only hub-centred aluminium spacers with the specific 5x110 bolt pattern and 65.1 mm hub fitment with extended M12x1.5 wheel bolts.
  • 330mm Brembo Clearance: Does your Corsa OPC E have the Performance Package with red 4‑piston Brembo calipers? For aftermarket 17 or 18 inch wheels always check beforehand whether the spoke profile provides sufficient clearance around the caliper.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Component / Operation Labour Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Lip Spoiler Installation € 55 - € 80 30 - 45 minutes
Sidebars Set Installation (Commercial Vans / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Installation (Commercial Vans / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Tailpipe (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which provides you with a 100% fit guarantee, manufacturer warranty and inspection (APK) certainty.

How does the vehicle check and fitment guarantee of Wheels 'N Customs work?

In our webshop you filter parts by Brand, Model, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the vehicle inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Remus/Friedrich Motorsport exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free APK inspection in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Model/Version restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Opel Corsa OPC (E 1.6 Turbo 207 hp Performance Package), would you like advice on 330mm Brembo caliper clearance, OZ Racing / JR-Wheels rims or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl