Wheel Fitment Guide - Peugeot 208 GTi by Peugeot Sport & 30th Edition (A9 1.6 THP 208 hp)

Wheels Fitment Guide - Peugeot 208 GTi by Peugeot Sport & 30th Edition

Model generation A9 (2014-2019) | 1.6 THP EP6FDTX (208 hp / 300 Nm) | Torsen Limited Slip Differential & 323mm Brembo Brakes

Wheels Fitment Guide Peugeot 208 GTi by Peugeot Sport Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Peugeot 208 GTi by Peugeot Sport & 30th Edition?
\r\nThe Peugeot 208 GTi by Peugeot Sport (BPS, including the legendary 208 GTi 30th Anniversary Edition, produced from 2014 to 2019 with an original new price of approximately € 29.000,- to € 32.500,-) is regarded as the spiritual and genuine successor to the iconic 205 GTI. Developed by Peugeot Sport, the BPS features a 10 mm lowered suspension, a 22 mm wider track at the front (16 mm at the rear), matte black arch extensions around the wheel arches, a mechanical Torsen limited-slip differential and red 4‑pot Brembo front brake calipers. The car uses the bolt pattern 4x108 with a 65.1 mm hub bore and M12x1.25 wheel bolts. Factory‑fit BPS sits on 18 inch matte black Lithium wheels with an extremely low offset (7.5J ET20 with 205/40 R18 Michelin Pilot Super Sport tyres). Because regular 208 wheels have much higher offsets (such as ET25 to ET32), standard wheels will immediately interfere with the Brembo calipers or the lowered chassis. For aftermarket or trackday wheels (such as 17x7.5J or 18x7.5J/8.0J) a very low ET value of ET15 to ET22 is required. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year of build and chassis number.

1. Factory specifications (OEM) Peugeot 208 GTi by Peugeot Sport

The values below represent the original factory parameters of the Peugeot 208 GTi by Peugeot Sport & 30th Edition. Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 4x108 Standard PSA 4‑bolt circle on the A9 platform.
Hub diameter (CB) 65.1 mm Standard Peugeot / Citroën hub bore. Centre rings required for wheels with a larger hub bore (e.g. 67.1 mm or 73.1 mm).
Wheel fixation type M12 x 1.25 Flat Seat / Conical Bolts 100 Nm tightening torque recommended by Peugeot Sport.
OEM Wheel sizes (18" Standard BPS / 30th Lithium) 7.5J x 18 ET20 Factory 18 inch matte black alloy wheels in a square setup.
OEM Tyre sizes 205/40 R18 Supplied on Michelin Pilot Super Sport or Michelin Pilot Sport 4 with XL Load Index.

2. Aftermarket Fitment Guide (17" & 18" 208 GTi BPS)

Do you want to equip your Peugeot 208 GTi by Peugeot Sport with a dedicated circuit/trackday wheelset, a wider stance or weight savings with Flow Formed wheels from brands like Team Dynamics (Pro Race 1.2), JR‑Wheels (JR11 / JR21 / JR30 / SL01 in 4x108), Speedline, Sparco, OZ Racing (Ultraleggera / Superturismo GT), Autec, Remus or Maxton‑styling? Below you’ll find the ideal sizes for a scratch‑free fitment around the 323mm Brembo brakes and widened arches.

Wheel diameter & construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
17 Inch (Lightweight Trackday / Circuit Sweet Spot) Front & Rear (Square) 7.0J / 7.5J ET15 - ET20 205/45 R17 (Semi‑slicks Nankang NS‑2R / Cup 2)
18 Inch (OEM+ Flush Street Performance Sweet Spot) Front & Rear (Square) 7.5J / 8.0J ET18 - ET22 205/40 R18 (or 215/40 R18)
18 Inch (Aggressive Fast Road & Stance Setup) Front & Rear (Square) 8.0J ET15 - ET18 215/40 R18 (Slight stretch on 8.0J)

3. Spacers & Fitting Determinations for 208 GTi BPS

Do you want to original 18" Lithium factory wheels (7.5J ET20) pushed further out to sit flush with the matte black wheel arch extensions?

  • Wheel Spacers (Spacers): On the original 7.5J ET20 factory wheels H&R or Eibach wheel spacers of 10 mm to 12 mm at the front and 12 mm to 15 mm at the rear can be fitted. Use only hub-centred aluminium spacers with the specific 4x108 bolt pattern and 65.1 mm centre bore with extended M12x1.25 wheel bolts.
  • 323mm Brembo Caliper Clearance: Because the 208 GTi BPS has large 4-piston Brembo calipers, standard 208 wheels with an ET value of ET25-30 DO NOT fit without thick spacers. Always choose wheels with a factory ET between ET15 and ET20.

4. Fixed Workshop Labour Rates Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Operation Labour Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, manufacturer warranty and MOT certainty.

How does the vehicle check and fitment guarantee from Wheels 'N Customs work?

In our webshop you filter parts by Brand, Model, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database matches). After placing your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Remus/Milltek exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a worry-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior checking of Brand/Model/Version restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Peugeot 208 GTi by Peugeot Sport or 30th Edition (1.6 THP 208 hp), would you like advice about 323mm Brembo brake caliper clearance, Team Dynamics / JR-Wheels wheels or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl