Wheel Fitment Guide: Porsche 718 Cayman & Boxster (2016-Present)

Wheels Fitment Guide: Porsche 718 Cayman & Boxster (2016-Present)

The Ultimate Technical Wheel & Suspension Guide for Porsche 718 Cayman & Boxster

Want to equip your Porsche 718 Cayman or 718 Boxster (Base, S, GTS, GTS 4.0, GT4 or Spyder) with a neat lightweight staggered setup, wheel spacers or a PASM-compatible lowering kit? In this official guide from Wheels 'N Customs you’ll find all factory specifications, 18 to 20 inch stagger combinations, PCCB caliper clearance and lowering advice.

Why is precise fitment essential on the Porsche 718 Cayman / Boxster?
The Porsche 718 platform uses a mid-engine layout with a specific track-width ratio. Factory specification uses fairly wide rear wheels (10.0J or 10.5J) with relatively high ET values (ET45 to ET57). Choosing incorrect ET values disrupts the dynamic Porsche Stability Management (PSM) operation and the unique neutral balance in high-speed corners.

1. Original Factory Specifications (OEM Fits)

The OEM specifications below apply to the Porsche 718 Cayman & 718 Boxster (Type 982):

Specification Factory Value (OEM) Expert Note
Bolt Pattern (PCD) 5x130 Classic Porsche 5-lug bolt pattern.
Centre Bore (CB) 71.6 mm Standard Porsche centre bore; use hub-centring rings for larger hub holes.
OEM Wheel Sizes 18, 19 and 20 Inch (Staggered) 18" (Cayman/Boxster OEM 8.0J/9.5J), 19" (S-Model 8.0J/10.0J), 20" (GTS / Carrera S Design 8.0J/10.0J / GT4 8.5J/11.0J).
OEM ET Value Range ET57 (Front) / ET45 - ET57 (Rear) Factory 8.0Jx19 ET57 front and 10.0Jx19 ET45 rear on the Cayman/Boxster S.
Wheel Fastening M14 x 1.5 Conical (R14) Note: OEM Porsche wheels use specific conical bolts with separate seat washers!
Tightening Torque 160 Nm Tighten to the prescribed Porsche torque of 160 Nm using a calibrated torque wrench.

2. Aftermarket Fitment Guide (What fits safely?)

Porsche drivers overwhelmingly choose lightweight forged staggered setups for the 718. See the recommended aftermarket combinations:

Size Setup Wheel Width (J) Ideal ET Value Recommended Tyre Size Fitment Character
18 Inch (Track / Circuit Wide Setup) Front: 18x8.5J
Rear: 18x10.0J
Front: ET48 - ET52
Rear: ET38 - ET42
Front: 235/40 R18
Rear: 265/40 R18 or 275/40 R18
Circuit Favourite! More rubber contact, lightweight, optimal g-force performance on track.
19 Inch (The Golden Middle) Front: 19x8.5J
Rear: 19x10.0J / 19x10.5J
Front: ET50 - ET54
Rear: ET42 - ET45
Front: 235/40 R19
Rear: 265/40 R19 or 285/35 R19
Excellent balance between sharp steering response and absorption of bumps.
20 Inch (GT4 / GTS Look) Front: 20x8.5J / 20x9.0J
Rear: 20x10.5J / 20x11.0J
Front: ET50 - ET53
Rear: ET45 - ET48
Front: 235/35 R20 or 245/35 R20
Rear: 265/35 R20 or 295/30 R20
Most Popular Choice! Visually maximises wheelarch fill, clean Porsche stance.

3. Wheel Spacers, Hub Adapters & Lowering Advice

The Porsche 718 already has fantastic handling, but with targeted upgrades the wheels can sit even tighter against the bodywork.

  • Wheel Spacers (Spacers): Are you using the original 19" or 20" Carrera S / GTS wheels (ET57 front / ET45 rear)? With a spacer set of 7 mm to 10 mm per side at the front and 12 mm to 15 mm per side at the rear the factory wheels will sit exactly flush. Only use hub-centric spacers (71.6 mm) with Porsche TÜV approval and extended M14x1.5 wheel bolts!
  • Lowering (PASM Compatible / Eibach / H&R / KW V3): Most 718s are equipped with PASM (Porsche Active Suspension Management). When lowering with Eibach Pro-Kit or H&R lowering springs (20-25 mm) the adaptive suspension remains fully functional. Combined with a 20x8.5J ET50 / 20x10.5J ET45 wide setup the fitment stays 100% rub-free.
  • Hub Adapters (5x130 to 5x112): Want to fit wheels with a 5x112 bolt pattern? This is possible using custom hub adapters at least 15 mm thick. Remember that the effective ET of the wheel decreases by the thickness of the adapter.

4. Frequently Asked Questions (FAQ)

Do 20 inch wide sets with ET50 front and ET45 rear rub on a lowered 718 Cayman?
No, provided you choose the recommended tyre sizes 235/35 R20 front and 265/35 R20 or 295/30 R20 rear. Even with a 20-25 mm drop on a PASM setup this wheel and tyre combination remains completely rub-free in the arches.
Do aftermarket wheels fit over the Porsche Ceramic Composite Brakes (PCCB)?
The optional yellow PCCB brakes use massive 350 mm / 410 mm ceramic discs with large calipers on the front axle. Not all 18 inch or 19 inch wheels offer sufficient spoke clearance (brake clearance) or inner diameter. For cars with PCCB specific 19 inch or 20 inch forged wheels (such as Apex, BC Forged, OZ Racing) are usually recommended.
Do I need specific wheel bolts for new aftermarket wheels?
Yes! Porsche’s original factory wheels use ball-conical (R14) M14x1.5 wheel bolts with a separate locating ring. Almost all aftermarket wheel manufacturers (such as OZ, BBS, Concaver, JR-Wheels) however use a 60° conical bolt seat. Fitting OEM Porsche bolts to conical aftermarket wheels can lead to damage to the wheel seat.

Have Your Fitment Checked By The Experts

Are you unsure about the correct ET value for your 718 Cayman or Boxster wide set, want to know if your dream wheels will fit over your PCCB brakes, or looking for advice on a suitable lowering kit? Contact the experts at Wheels 'N Customs in Nijkerk directly.

Ask Our Experts For Advice

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl