Wheel Fitment Guide - Porsche 911 Dakar (992)

Wheel Fitment Guide - Porsche 911 Dakar (992)

Model generation 992 Limited (2023-present, 2,500 units) | 3.0 B6 Twin-Turbo (480 hp / 570 Nm) | Offroad Lift Suspension & All-Terrain 5x130

Wheels Fitment Guide Porsche 911 Dakar 992 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Porsche 911 Dakar (992)?
The Porsche 911 Dakar (Generation 992) is a spectacular tribute to the victory in the Paris-Dakar rally of 1984. Powered by the 480 HP and 570 Nm 3.0‑litre Twin-Turbo boxer engine with All-Wheel Drive and rear-axle steering, the Dakar combines supercar speed with genuine offroad capability. Limited worldwide to 2,500 examples, the 911 Dakar features increased ride height and plastic wheel arch extensions. Unlike the circuit-focused GT3 models, the Dakar deliberately uses the traditional 5x130 5-stud pattern with a 71.6 mm centre bore and M14x1.5 wheel bolts. From the factory the 992 Dakar sits on a unique staggered 19/20 inch setup with forged wheels: 8.5J ET53 at the front (with 245/45 ZR19 All-Terrain tyres) and 11.5J ET63 at the rear (with 295/40 ZR20 All-Terrain tyres). For aftermarket wheel sets for road or winter use, the considered combination of wheel arch clearance at full suspension compression and the PTM all-wheel drive ratios is essential. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Brand, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Porsche 911 Dakar (992)

The values below represent the original factory parameters of the Porsche 911 Dakar (992). Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory Value (OEM) Notes & Advice
Punch Circle Diameter (PCD) 5x130 Classic Porsche 5-stud bolt circle on the Dakar 992 platform.
Centre Bore (CB) 71.6 mm Standard Porsche centre bore for 5-stud wheels.
Wheel Fastening Type M14 x 1.5 Spherical Conical Bolts 160 Nm torque recommended by Porsche.
OEM Wheel Sizes (19"\/20" Dakar Forged) Front: 8.5J x 19 ET53
Rear: 11.5J x 20 ET63
Factory 911 Dakar forged alloy wheels in Silver or Black.
OEM Wheel Colours (Rallye Design Package) White (White) or Black with silver rim Linked to the nostalgic Rothmans-inspired Rallye Design theme.
OEM Tyre Sizes Front: 245\/45 ZR19
Rear: 295\/40 ZR20
Supplied on specially developed Pirelli Scorpion All-Terrain Plus (NA0 OEM spec) with reinforced carcass construction.

2. Aftermarket Fitment Guide (19"\/20" & 20"\/21" 992 Dakar)

Do you want to fit your Porsche 911 Dakar (992) with a street-performance wheelset, a dedicated winter setup or save weight with Custom Forged wheels from brands like BBS, HRE, Brixton Forged, Vossen, OZ Racing or BC Forged? Below you’ll find the ideal sizes for a scratch-free fit, also for use off-road or on the motorway.

Wheel Diameter & Specification Position Recommended Rim Width (J) Ideal ET Range Recommended Tyre Size
19"\/20" Inch (OEM+ All-Terrain / Offroad Sweet Spot) Front
Rear
8.5J / 9.0J
11.5J
ET48 - ET53
ET58 - ET63
245\/45 R19 (Pirelli Scorpion All-Terrain Plus NA0)
295\/40 R20 (Pirelli Scorpion All-Terrain Plus NA0)
19"\/20" Inch (Dedicated Winter Performance Setup) Front
Rear
8.5J
11.5J
ET48 - ET53
ET58 - ET63
245\/45 R19 (Pirelli Sottozero 3 NA0)
295\/40 R20 (Pirelli Sottozero 3 NA0)
20"\/21" Inch (Street Performance / High-Speed Setup) Front
Rear
8.5J / 9.0J
11.5J / 12.0J
ET45 - ET50
ET55 - ET60
245\/35 R20 (Michelin Pilot Sport 4S NA0)
305\/30 R21 (Michelin Pilot Sport 4S NA0)

3. Wheel Spacers & Fitting Considerations for 992 Dakar

Would you like more background on the installation and track width of your Porsche 911 Dakar (992)?

  • Wheel Spacers for 5x130 PCD: Because the 911 Dakar uses the 5x130 5-stud pattern, H&R or Eibach spacers from 8 mm to 12 mm can be fitted at the front and 10 mm to 15 mm at the rear. Use only hub-centric aluminium spacers with the specific 71.6 mm centre bore and extended M14x1.5 wheel bolts.
  • All-wheel Drive & Rolling Circumference: When switching to street or winter tyres the rolling circumference ratio between front and rear must exactly match the Dakar’s PTM all-wheel-drive software to prevent transfer case errors.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):

Part / Labour Fitting Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Installation € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Installation € 55 - € 80 30 - 45 minutes
Sidebars Set Installation (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Installation (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Tip (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does the vehicle check and fitment guarantee of Wheels 'N Customs work?

In our webshop you filter parts by Make, Model, Variant and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Capristo/TechArt exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This ensures a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Make/Model/Variant, restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Porsche 911 Dakar (992), would you like advice on All-Terrain vs. Street tyres or 5x130 track wideners, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl