Wheel Fitment Guide - Porsche 911 GT2 RS (991.2)

Wheels Fitment Guide - Porsche 911 GT2 RS (991.2)

Model generation 991.2 Coupé (2017-2019) | 3.8 B6 Twin-Turbo (700 hp / 750 Nm) | Weissach Package Central Lock Motorsport

Wheels Fitment Guide Porsche 911 GT2 RS 991 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Porsche 911 GT2 RS (991.2)?
The Porsche 911 GT2 RS (Type 991.2) is the most powerful and extreme road-legal model of the 991 generation. Powered by a 700 HP and 750 Nm 3.8-litre Twin-Turbo six-cylinder boxer engine with an intercooler water-spray system and pure rear-wheel drive, the GT2 RS places almost ruthless demands on wheel strength, weight saving and grip. The GT2 RS uses the motorsport Porsche Central Lock system with a fixed tightening torque of 600 Nm. Factory-fitted, the GT2 RS rides on an impressive staggered diameter setup: 20 inch at the front (9.5J ET50 with 265/35 ZR20 tyres) and 21 inch at the rear (12.5J ET48 with 325/30 ZR21 tyres on forged light-alloy or optional Weissach Magnesium wheels). Because the GT2 RS is standard equipped with solid 410 mm PCCB ceramic brakes with yellow- or red-coated 6-piston brake calipers, spoke and barrel clearance is of primary importance for aftermarket or trackday wheels. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year of manufacture and chassis number.

1. Factory specifications (OEM) Porsche 911 GT2 RS (991.2)

The values below represent the original factory parameters of the Porsche 911 GT2 RS (991.2). Use these as a technical reference when purchasing new Central Lock wheels.

Specification Factory value (OEM) Notes & Advice
Bolt pattern / Locking Porsche Central Lock (Central Wheel Nut) Motorsport central nut on the 991.2 platform. Tightening torque of 600 Nm with special Porsche TA grease.
Hub & Locking System Porsche Central Lock Hub Integrated automatic locking pin. Requires special tool for disassembly.
OEM Wheel Sizes (20"/21" Standard GT2 RS Forged) Front: 9.5J x 20 ET50
Rear: 12.5J x 21 ET48
Factory GT2 RS forged aluminium Central Lock wheels in staggered diameter.
OEM Wheel Sizes (20"/21" Weissach Magnesium Option) Front: 9.5J x 20 ET50
Rear: 12.5J x 21 ET48
Ultra-lightweight Weissach Package magnesium wheels in White Gold, Satin Black or Platinum.
OEM Tyre Sizes Front: 265/35 ZR20
Rear: 325/30 ZR21
Required to be fitted with N-marking (N0 Michelin Pilot Sport Cup 2 / Cup 2R) with XL load index.

2. Aftermarket Fitment Guide (20"/21" 991.2 GT2 RS)

Do you want to fit your Porsche 911 GT2 RS (991.2) with weight savings by using ultra-light Forged / Magnesium Central Lock wheels from brands like BBS (FI-R Central Lock), Manthey Racing, OZ Racing (Ultraleggera HLT CL), HRE, Brixton Forged or BC Forged? Below you will find the ideal sizes for scratch-free fitment, also for track use.

Wheel Diameter Construction & Finish Position Recommended Wheel Width (J) Ideal ET Value Range Recommended Tyre Size
20"/21" Inch (Motorsport & Nürburgring Sweet Spot) Front
Rear
9.5J
12.5J
ET48 - ET52
ET46 - ET48
265/35 R20 (Michelin Pilot Sport Cup 2R N0)
325/30 R21 (Michelin Pilot Sport Cup 2R N0)
20"/21" Inch (Manthey Racing GT2 RS Performance Setup) Front
Rear
9.5J
12.5J
ET48 - ET52
ET46 - ET48
265/35 R20 (Cup 2R)
325/30 R21 (Cup 2R)
19"/20" Inch (Dedicated Trackday Full Slick Setup) Front
Rear
9.5J
12.0J / 12.5J
ET48 - ET52
ET44 - ET48
265/35 R19 (Slick fitment over PCCB with specific barrel)
325/30 R20

3. Track Width Spacers & Central Lock Regulations for GT2 RS

Would you like more background on fitting and track width for your Porsche 911 GT2 RS (991.2)?

  • No Conventional Spacers: On Porsche Central Lock hub systems it is NOT possible to fit traditional wheel spacers because of the unique central locking mechanism and the integrated locking pins. Any increased track width must be achieved exclusively with bespoke Custom Forged Central Lock wheels with specifically calculated ET values.
  • Maintenance & Tightening Torque: Tightening and loosening the Central Lock wheel nut on the GT2 RS requires an approved torque wrench up to at least 600 Nm and a second person to depress the brake pedal. The splines must be cleaned after every track day and re-greased with official Porsche Castrol Optimoly TA grease.

4. Fixed Workshop Labour Rates Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspensions on 2 to 5 cars daily. We use transparent fixed rates (excl. VAT):

Part / Labour Fitting Rate (Excl. VAT) Indicative Fitment Time
Complete Wheel Set Fitment & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-movers"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT-compliance.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Make, Model, Specification and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists carry out a manual check based on your vehicle data and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail to provide 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the MOT/inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Manthey Racing/Capristo exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the terms for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Make/Model/Specification restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Porsche 911 GT2 RS (991.2), would you like advice on 410mm PCCB caliper clearance or Central Lock BBS/Manthey magnesium wheels, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl