Wheel Fitment Guide - Porsche 911 GT3 RS (992)

Wheels Fitment Guide - Porsche 911 GT3 RS (992)

Model generation 992 Coupé (2022-present) | 4.0 Naturally Aspirated Flat-six B6 (525 hp / 9,000 rpm) | DRS Active Aero Central Lock Motorsport

Wheels Fitment Guide Porsche 911 GT3 RS 992 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Porsche 911 GT3 RS (992)?
The Porsche 911 GT3 RS (Generation 992) is the most uncompromising track weapon for road use ever produced. Powered by the high-revving 525 HP 4.0-litre six-cylinder boxer engine and equipped with active DRS aerodynamics (which generate more than 860 kg of downforce), the 992 GT3 RS places extreme demands on wheel stiffness, fitment and weight saving. The car uses the motorsport Porsche Central Lock (central wheel nut) system with a fixed tightening torque of 600 Nm. Factory-fitted the 992 GT3 RS runs a massive staggered diameter setup: 20 inch at the front (10.0J ET45 with 275/35 ZR20 tyres) and 21 inch at the rear (13.0J ET45 with 335/30 ZR21 tyres on forged aluminium or optional Weissach Magnesium wheels). For aftermarket or trackday wheels from brands such as BBS, Manthey Racing, HRE or OZ Racing, spoke- and barrel-clearance around the massive 408 mm steel or 410 mm PCCB ceramic 6-piston brakes is of primary importance. At Wheels 'N Customs in Nijkerk we check every order beforehand based on your selected Brand, Model, Variant, Year of manufacture and chassis number.

1. Factory specifications (OEM) Porsche 911 GT3 RS (992)

The values below represent the original factory parameters of the Porsche 911 GT3 RS (992). Use these as a technical reference when purchasing new Central Lock wheels.

Specification Factory Value (OEM) Notes & Advice
Pitch Pattern / Locking Porsche Central Lock (Central Wheel Nut) Motorsport central nut on the 992 GT3 RS. Torque is 600 Nm with special Porsche TA grease.
Hub & Locking System Porsche Central Lock Hub Integrated automatic locking pin. Requires special tools for disassembly.
OEM Wheel Sizes (20"/21" GT3 RS Standard Forged) Front: 10.0J x 20 ET45
Rear: 13.0J x 21 ET45
Factory GT3 RS forged aluminium Central Lock wheels in staggered diameter.
OEM Wheel Sizes (20"/21" Weissach Magnesium Option) Front: 10.0J x 20 ET45
Rear: 13.0J x 21 ET45
Ultra-lightweight Weissach Package magnesium wheels in Pyro Red, Indigo Blue, Black or Neodyme.
OEM Tyre Sizes Front: 275/35 ZR20
Rear: 335/30 ZR21
Must be fitted with N-Marking (N0 Michelin Pilot Sport Cup 2 / Cup 2R or Pirelli P Zero Trofeo RS) with XL load index.

2. Aftermarket Fitment Guide (20"/21" 992 GT3 RS)

Do you want to fit your Porsche 911 GT3 RS (992) with weight-saving ultra-light forged / magnesium Central Lock wheels from brands like BBS (FI-R EVO / RE-MGL Central Lock), Manthey Racing, OZ Racing (Ultraleggera HLT CL), HRE, Brixton Forged or BC Forged? Below are the ideal sizes for scratch-free clearance, also suitable for track use.

Rim Diameter Construction & Version Position Recommended Rim Width (J) Ideal ET Value Range Recommended Tyre Size
20"/21" Inch (Motorsport & Nürburgring Sweet Spot) Front
Rear
10.0J
13.0J
ET42 - ET45
ET42 - ET45
275/35 R20 (Michelin Pilot Sport Cup 2R N0)
335/30 R21 (Michelin Pilot Sport Cup 2R N0)
20"/21" Inch (Manthey Racing GT3 RS Performance Setup) Front
Rear
10.0J
13.0J
ET42 - ET45
ET42 - ET45
275/35 R20 (Trofeo RS)
335/30 R21 (Trofeo RS)
19"/20" Inch (Dedicated Trackday Full Slick Setup) Front
Rear
10.0J
12.5J / 13.0J
ET42 - ET45
ET40 - ET45
275/35 R19 (Slick fitment over steel brakes)
335/30 R20

3. Track Spacers & Central Lock Provisions for 992 GT3 RS

Would you like more background on fitting and track width for your Porsche 911 GT3 RS (992)?

  • No Conventional Spacers: It is NOT possible to fit traditional wheel spacers to Porsche Central Lock hub systems because of the unique central locking mechanism and integrated locking pins. Any wider track must be achieved exclusively with custom-made Custom Forged Central Lock wheels with specifically calculated ET values.
  • Maintenance & Torque: Tightening and loosening the Central Lock wheel nuts on the 992 GT3 RS requires an approved torque wrench up to at least 600 Nm and a second person to depress the brake pedal. The splines should be cleaned and re-greased with official Porsche Castrol Optimoly TA grease after every track day.

4. Fixed Workshop Rates Nijkerk

In our spacious and professional workshop in Nijkerk we mount wheels, exhaust systems, bodykits and suspensions on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Labour Mounting Rate (Excl. VAT) Indicative Mounting Time
Complete Wheel Set Mounting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Lip Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Tailpipe (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a webshop catalogue of over 250,000 items with our own physical workshop in Nijkerk. We test, fit and check the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does the vehicle check and fitment guarantee of Wheels 'N Customs work?

In our webshop you filter parts by Make, Model, Variant and Year (we deliberately do not use a licence-plate filter to avoid incorrect database matches). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If there is doubt we will request 1–2 photos of your brakes or wheel arches via WhatsApp or e-mail within 48 hours. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the MOT?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Manthey Racing/Capristo exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Variant restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about exact fitment for your Porsche 911 GT3 RS (992), would you like advice on 410mm PCCB caliper clearance or Central Lock BBS/Manthey magnesium wheels, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl