Wheel Fitment Guide - Porsche 911 S/T (992)

Wheels Fitment Guide - Porsche 911 S/T (992)

Model generation 992 Limited (2023-present, 1,963 units) | 4.0 Naturally Aspirated Flat-six B6 (525 hp / 9,000 rpm) | 6-Speed Manual & Central Lock Magnesium

Wheels Fitment Guide Porsche 911 ST 992 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Porsche 911 S/T (992)?
\r\nThe Porsche 911 S/T (Generation 992) is an exclusive tribute to 60 years of the 911, globally limited to exactly 1,963 units. Powered by the high-revving 525 hp 4.0-litre six-cylinder boxer engine from the GT3 RS paired with a short-geared 6-speed manual gearbox, the S/T at 1,380 kg is the lightest 992 in the world. The car combines the sleek Touring body with a double-wishbone front axle and uses the motorsport Porsche Central Lock (central wheel nut) system. Factory-fitted, the 992 S/T runs on an ultra-light staggered diameter setup with forged magnesium wheels: 20 inch at the front (9.5J ET46 with 255/35 ZR20 tyres) and 21 inch at the rear (12.0J ET45 with 315/30 ZR21 tyres in Ceramica or Dark Silver). Because the S/T is standard equipped with solid 410 mm PCCB ceramic brakes and a specific lightweight single-mass flywheel character, it places extremely high demands on wheel mass and barrel clearance. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Brand, Model, Specification, Year of Manufacture and chassis number.

1. Factory specifications (OEM) Porsche 911 S/T (992)

The values below represent the original factory parameters of the Porsche 911 S/T (992). Use these as a technical reference when purchasing new Central Lock wheels.

Specification Factory value (OEM) Notes & Advice
Bolt Pattern / Locking System Porsche Central Lock (Central Wheel Nut) Motorsport central nut. Tightening torque of 600 Nm using special Porsche TA grease.
Hub & Locking System Porsche Central Lock Hub Integrated automatic locking pin. Requires special tool for disassembly.
OEM Wheel Sizes (20"/21" S/T Forged Magnesium) Front: 9.5J x 20 ET46
Rear: 12.0J x 21 ET45
Factory 911 S/T forged magnesium Central Lock wheels in staggering diameter.
OEM Wheel Colours (S/T Heritage Package) Ceramica (Ivory Gold) or Dark Silver Exclusive finishes associated with the Heritage Design Package.
OEM Tyre Sizes Front: 255/35 ZR20
Rear: 315/30 ZR21
Must be fitted with N-Marking (N0 Michelin Pilot Sport Cup 2 / Cup 2R) with XL Load Index.

2. Aftermarket Fitment Guide (20"/21" 992 S/T)

Do you want to fit your Porsche 911 S/T (992) with a spare wheelset or save weight with ultra-light Forged / Magnesium Central Lock wheels from brands such as BBS (FI-R EVO / RE-MGL Central Lock), Manthey Racing, OZ Racing (Ultraleggera HLT CL), HRE, Brixton Forged or BC Forged? Below you will find the ideal sizes for a scratch-free fit, also for track use.

Wheel Diameter Construction & Specification Position Recommended Wheel Width (J) Ideal ET-Value Range Recommended Tyre Size
20"/21" Inch (Street & Heritage Sweet Spot) Front
Rear
9.5J
12.0J
ET42 - ET46
ET42 - ET45
255/35 R20 (Michelin Pilot Sport Cup 2 N0)
315/30 R21 (Michelin Pilot Sport Cup 2 N0)
20"/21" Inch (Manthey Racing / Track Performance) Front
Rear
9.5J
12.0J
ET42 - ET46
ET42 - ET45
255/35 R20 (Cup 2R)
315/30 R21 (Cup 2R)
19"/20" Inch (Dedicated Full Slick Circuit Setup) Front
Rear
9.5J
12.0J
ET42 - ET46
ET42 - ET45
255/35 R19 (Slick fitment over PCCB with specific barrel)
315/30 R20

3. Track Spacers & Central Lock Regulations for 992 S/T

Would you like more background on the fitment and track width of your Porsche 911 S/T (992)?

  • No Conventional Wheel Spacers: On Porsche Central Lock hub systems it is NOT possible to fit traditional wheel spacers due to the unique central locking mechanism and integrated locking pins. A wider track is achieved exclusively by custom-made Custom Forged Central Lock wheels with specifically calculated ET values.
  • Maintenance & Tightening Torque: Tightening and loosening the Central Lock wheel nuts on the 992 S/T requires an approved torque wrench of at least 600 Nm and a second person to depress the brake pedal. The splines must be cleaned and re-greased with official Porsche Castrol Optimoly TA grease after every track day.

4. Fixed Workshop Labour Rates Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension daily on 2 to 5 cars. We use transparent fixed rates (excl. VAT):

Part / Labour Fitting Rate (Excl. VAT) Indicative Fitting Time
Complete Wheelset Fit & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fit € 80 - € 120 45 - 60 minutes
Side Skirts Set Fit € 103 - € 145 60 - 90 minutes
Rear Diffuser Fit € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fit € 55 - € 80 30 - 45 minutes
Sidebars Set Fit (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fit (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-movers"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which provides you with a 100% fitment guarantee, factory warranty and MOT certainty.

How does the vehicle inspection and fitment guarantee of Wheels 'N Customs work?

In our webshop you filter parts by Brand, Model, Version and Year (we deliberately do not use a licence-plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Manthey Racing/Capristo exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-order items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Model/Version, restocking costs of 25% to 40% may apply for inspection and repackaging.

Get in Touch / Request Advice

Do you have specific questions about exact fitment for your Porsche 911 S/T (992), would you like advice on 410mm PCCB caliper clearance or Central Lock BBS/Manthey magnesium wheels, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl