Model generation 981 (2012-2016) | 3.4 Naturally Aspirated 6-Cylinder Flat Engine MA1.23 (325 hp / 370 Nm) | PASM Active Suspension & Mid-Engine Staggered Setup

Why is correct wheel fitment crucial for the Porsche Cayman S (981)?
The Porsche Cayman S (981 generation, produced from 2012 to 2016 with an original list price of approximately € 64,500 to € 69,800) is praised by motoring journalists and purists as one of the best-handling sports cars of all time. Powered by the howling 3.4-litre naturally aspirated six-cylinder flat engine (325 hp and 370 Nm of torque with a redline at 7,800 rpm), a 6-speed manual or lightning-fast 7-speed PDK dual-clutch, optional PASM and Sport Chrono Package, the 981 Cayman S is a masterpiece. The Cayman S uses the traditional Porsche bolt pattern 5x130 with a 71.6 mm centre bore and M14x1.5 conical wheel bolts. Crucial on the 981 Cayman S is the factory **Staggered (wide set)** configuration. From the factory, the 981 Cayman S sits on 19 inch Cayman S III wheels (8.0J ET57 front with 235/40 R19 & 9.5J ET45 rear with 265/40 R19) or optional 20 inch Carrera S III / Techno wheels (8.0J ET57 front with 235/35 R20 & 9.5J ET45 rear with 265/35 R20 Pirelli P Zero N0 / Michelin Pilot Sport 4S N0 tyres). To accommodate the red 4-piston aluminium Brembo calipers and 330 mm perforated front discs and to optimise track width, a precise ET value is required. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and VIN.
The image below shows an original 19 inch Porsche 981 alloy wheel in silver finish:
The values below represent the original factory parameters of the Porsche Cayman S (981 3.4 Flat-Six 325 hp). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory Value (OEM) | Explanation & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x130 | Standard Porsche 5-lug bolt circle on the 981 platform. |
| Centre bore (CB) | 71.6 mm | Standard Porsche centre bore. Hub rings required for wheels with a larger centre bore. |
| Wheel Fastening Type | M14 x 1.5 Conical Bolts | Tightening torque of 160 Nm recommended by Porsche AG. |
| OEM Wheel Sizes (19" Cayman S III Staggered) | 8.0J x 19 ET57 Front 9.5J x 19 ET45 Rear |
Factory 19 inch alloy staggered set in RWD configuration. |
| OEM Wheel Sizes (20" Carrera S III / Techno Staggered) | 8.0J x 20 ET57 Front 9.5J x 20 ET45 Rear |
Factory 20 inch alloy staggered set on S & GTS variants. |
| OEM Tyre Sizes | 235/40 R19 Front & 265/40 R19 Rear (19") 235/35 R20 Front & 265/35 R20 Rear (20") |
Supplied on Michelin Pilot Sport 4S N0, Pirelli P Zero N0 or Goodyear Eagle F1 Asymmetric 2 N0 (Porsche OEM spec). |
Do you want to equip your Porsche Cayman S 981 with a dedicated circuit/trackday wheel set, a more aggressive track width or weight saving via Flow Formed / Custom Forged wheels from brands such as OZ Racing (Ultraleggera HLT / Leggera HLT in 5x130), BBS (CH-R II / FI-R), Apex Wheels (SM-10 / VS-5RS in Porsche fitment), TechArt, BC Forged, Capristo, IPD Plenum, Armytrix or Maxton styling? Below you will find the ideal sizes for a rub-free fit around the 330 mm 4-piston Brembo brakes.
| Wheel Diameter & Setup | Position | Recommended Rim Width (J) | Ideal Offset Range (ET) | Recommended Tyre Size |
|---|---|---|---|---|
| 19 Inch (Lightweight Trackday / Circuit Sweet Spot) | Front Rear |
8.5J Front 9.5J or 10.0J Rear |
ET48 - ET55 ET40 - ET45 |
235/40 R19 Front 265/40 R19 Rear (Semi-slicks Michelin Cup 2 / Nankang AR-1) |
| 20 Inch (OEM+ Flush Fast Road Staggered Set Sweet Spot) | Front Rear |
8.5J Front 10.0J Rear |
ET48 - ET52 ET40 - ET45 |
245/35 R20 Front 275/35 R20 Rear |
| 20 Inch (Aggressive Deep Concave / GT4 Look Staggered Set) | Front Rear |
8.5J or 9.0J Front 10.5J Rear |
ET45 - ET50 ET38 - ET42 |
245/35 R20 Front 285/30 R20 Rear (Maximally fills the wide Porsche rear haunches) |
Do you want to push the original 19" or 20" Porsche factory wheels (8.0J ET57 / 9.5J ET45) outwards a bit to make them sit flush with the bodywork?
In our spacious and professional workshop in Nijkerk we install wheels, exhaust systems, body kits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):
| Part / Work | Installation Rate (Excl. VAT) | Indicative Installation Time |
|---|---|---|
| Complete Wheel Set Installation & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Installation | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Installation | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Installation | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Installation | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Installation (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Installation (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Installation (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a web shop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, install and check the parts ourselves on a daily basis, which gives you a 100% fitment guarantee, manufacturer's warranty and APK assurance.
In our web shop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order, our specialists carry out a manual check based on your vehicle data and chassis number. If in doubt, we will ask you within 48 hours via WhatsApp or e-mail for 1 à 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or installed.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW/TechArt, Capristo/Armytrix exhaust systems and body kits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a trouble-free APK inspection in the Netherlands and vehicle inspection in Belgium.
According to European Directive 2011/83/EU, for online purchases you have the right to withdraw from your order within 14 days. Excluded from the right of withdrawal are specially custom-ordered items, custom-drilled wheels (Custom ET/Blank) and mounted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Model/Version, restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Porsche Cayman S (981 3.4 boxer engine 325 hp), would you like advice on 330mm 4-piston Brembo caliper clearance, 19 or 20 inch OZ Racing / BBS / Apex staggered sets or spacers, or would you like to receive an all-in quotation including workshop installation in Nijkerk?