Wheel Fitment Guide - Renault Clio R.S. 197 / 200 Cup (MK3 2.0 16V 197 hp / 200 hp)

Wheels Fitment Guide - Renault Clio R.S. 197 / 200 Cup (MK3 2.0 16V)

Model generation MK3 / III (2006-2012) | 2.0 16V Naturally Aspirated F4R (197 hp / 200 hp - 215 Nm) | Perrot Dual-Axis Front Suspension & Functional Rear Diffuser

Wheels Fitment Guide Renault Clio RS 197 200 Cup Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Renault Clio R.S. 197 / 200 Cup (MK3)?
\r\nThe Renault Clio R.S. MK3 (produced from 2006 to 2012 in Clio R.S. 197, R.S. 200 and the weight-reduced Cup Edition with an original new price of approximately € 24.500,- to € 29.500,-) is regarded as one of the last pure, high-revving naturally aspirated hot hatches. Powered by the 2.0-litre F4R 16-valve engine (7,500 rpm redline) with 197 HP or 200 HP, flared front wings with functional cooling vents and a real functional rear diffuser, the Clio 3 R.S. delivers unrivalled steering precision. The car uses the bolt pattern 5x114.3 with a 66.1 mm centre bore and M12x1.5 wheel bolts. Factory-fitment the Clio 3 R.S. runs on 17 inch Bebop or Raider/Cup alloy wheels with an extremely high offset (7.5J ET68 with 215/45 R17 Continental SportContact 3 tyres). Because the factory offset is so high, aftermarket wheels with a lower offset (such as 17x7.5J or 17x8.0J with ET45 to ET55) sit beautifully out towards the edges of the wide R.S. arches. When selecting aftermarket or trackday wheels you must take into account the red or silver 4-piston Brembo calipers at the front. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

The image below shows the original white 17 inch alloy Cup wheel of the Renault Clio 3 R.S.:

Original white 17 inch Clio Cup alloy wheel for Clio III RS

1. Factory specifications (OEM) Renault Clio R.S. 197 / 200

The values below represent the original factory parameters of the Renault Clio R.S. 197 / 200 Cup (MK3). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x114.3 Standard Renault Sport 5-bolt PCD on the Clio 3 R.S. hub.
Centre bore (CB) 66.1 mm Standard Renault / Nissan centre bore. Centre rings required for wheels with a larger centre bore (e.g. 73.1 mm).
Wheel attachment type M12 x 1.5 Conical Bolts Torque of 105 Nm recommended by Renault Sport.
OEM Wheel sizes (17" Standard Bebop / Raider Cup) 7.5J x 17 ET68 Factory 17 inch alloy wheels in a square setup.
OEM Tyre sizes 215/45 R17 Supplied on Continental SportContact 3 or Michelin Pilot Sport 3 with XL Load Index.

2. Aftermarket Fitment Guide (17" & 18" Clio 3 R.S.)

Do you want to equip your Renault Clio R.S. 197 or 200 with a dedicated circuit/trackday wheelset, a wider stance or weight savings through Flow Formed wheels from brands such as Speedline (2120 / Turini / Corse), OZ Racing (Alleggerita HLT / Ultraleggera / Superturismo WRC in 5x114.3), Motec (Ultralight), Autec (Wizard), JR-Wheels (JR11 / JR21 / JR30 / SL01), Concaver, Sparco, Akrapovi?, K-Tec Racing or Maxton-styling? Below you’ll find the ideal sizes for a scratch-free fitment around the 312mm Brembo brakes.

Wheel diameter & construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
17 Inch (Lightweight Circuit / Trackday Sweet Spot) Front & Rear (Square) 7.5J / 8.0J ET48 - ET58 215/45 R17 (Semi-slicks Nankang AR-1 / Cup 2 / NS-2R)
17 Inch (OEM+ Flush Fast Road Setup) Front & Rear (Square) 7.5J / 8.0J ET45 - ET52 215/45 R17 (or 225/45 R17)
18 Inch (OEM+ Flush Show & Performance Setup) Front & Rear (Square) 8.0J ET45 - ET50 215/40 R18 (or 225/35 R18)

3. Wheel Spacers & Fitment Specifications for Clio 3 R.S.

Do you want to push the original 17" Bebop or Raider factory wheels with their extremely high offset (7.5J ET68) a little further outwards so they sit flush with the rolled R.S. arches?

  • Wheel Spacers (Spacers): Due to the very high factory ET value (ET68), H&R, Eibach or Pure Motorsport wheel spacers of 15 mm to 20 mm can be fitted to the original factory wheels at the front and 15 mm to 20 mm at the rear. Use only hub-centred aluminium spacers with the specific 5x114.3 bolt pattern and 66.1 mm centre bore with extended M12x1.5 wheel studs.
  • 312mm Brembo Clearance & Perrot: The Perrot steering system of the Clio 3 R.S. requires that aftermarket wheels provide sufficient spoke clearance around the solid 4-pot Brembo calipers. An ET value between ET45 and ET55 is ideal for aftermarket wheels.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspensions daily to 2 to 5 cars. We use transparent fixed rates (excl. VAT):

Part / Service Labour Rate (Excl. VAT) Indicative Labour Time
Complete Wheel Set Fitment & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Lip Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitment (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT certainty.

How does the vehicle inspection and fitment guarantee of Wheels 'N Customs work?

In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence-plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will request 1 to 2 photos of your brakes or wheel arches via WhatsApp or e-mail within 48 hours. Only after 100% approval will your order be processed or fitted.

Are the wheels and parts we fit approved for the inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/K-Tec/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This ensures a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the terms for withdrawal and returns (Directive 2011/83/EU)?

Under European Directive 2011\/83\/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET\/Blank) and mounted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand\/Type\/Specification restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us \/ Request Advice

Do you have specific questions about the exact fitment for your Renault Clio R.S. 197 \/ 200 Cup (MK3 2.0 16V), would you like advice about 312mm Brembo caliper clearance, Speedline \/ OZ Racing \/ Motec wheels or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl