Model generation MK3 / III Coupé (2009-2016) | 2.0 16V Turbo F4Rt (250 hp / 265 hp / 275 hp - 360 Nm) | Cup Chassis GKN LSD & Öhlins Road & Track

Why is correct wheel fitment crucial for the Renault Mégane R.S. MK3?
The Renault Mégane R.S. MK3 (produced from 2009 to 2016 in R.S. 250, R.S. 265, 275 Trophy and the legendary Nürburgring record-breaker Trophy-R, with an original new price of approximately € 32.000,- to € 41.500,-) is regarded as one of the most celebrated driver’s cars of the hot-hatch era. Powered by the bulletproof 2.0-litre F4Rt turbo engine (250 PS to 275 PS and 360 Nm) and equipped with the advanced Perrot dual-axis front suspension (Perpivot) with a mechanical GKN limited-slip differential, the Mégane R.S. MK3 is peerless on track. The car uses the bolt pattern 5x114.3 with a 66.1 mm centre bore and M12x1.5 wheel bolts. From the factory the MK3 R.S. runs a very high offset: 18 inch Tibor/Kepler wheels (8.25J ET65 with 235/40 R18) or optional 19 inch Steev or Speedline Turini wheels (8.25J ET65 with 235/35 R19 Michelin Pilot Sport Cup 2 tyres). When selecting aftermarket or trackday wheels (such as 18x8.5J or 18x9.0J with ET45 to ET55) the track is slightly widened, which pairs fantastically with Akrapovi? titanium exhausts and Öhlins adjustable dampers. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Specification, Year of Manufacture and chassis number.
The values below represent the original factory parameters of the Renault Mégane R.S. 250 / 265 / 275 Trophy (MK3). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x114.3 | Standard Renault Sport 5-lug bolt circle on the MK3 R.S. platform. |
| Centre bore (CB) | 66.1 mm | Standard Renault / Nissan centre bore. Hub-centric rings required for wheels with a larger centre bore (e.g. 73.1 mm). |
| Wheel attachment type | M12 x 1.5 Conical Bolts | 110 Nm torque recommended by Renault Sport. |
| OEM Wheel sizes (18" Tibor / Kepler Satin Black) | 8.25J x 18 ET65 | Factory 18 inch alloy wheels in a square fitment. |
| OEM Wheel sizes (19" Steev / Speedline Turini Trophy) | 8.25J x 19 ET65 | Factory 19 inch iconic multi-spoke alloy wheels in Red or Gloss Black on Trophy models. |
| OEM Tyre sizes | 235/40 R18 (on 18") / 235/35 R19 (on 19") | Supplied on Dunlop SP Sport Maxx TT, Michelin Pilot Super Sport or Michelin Pilot Sport Cup 2 (Trophy) with XL Load Index. |
Do you want to equip your Renault Mégane R.S. MK3 with a dedicated circuit/trackday wheelset, a wider track or save weight with Flow Formed wheels from brands such as Speedline (Turini / Corse), OZ Racing (Alleggerita HLT / Ultraleggera / Challenge in 5x114.3), Motec (Ultralight / Nitro), Autec (Wizard), JR-Wheels (JR11 / JR21 / JR30 / SL01), Concaver, Sparco, Akrapovi?, Inox or Maxton-styling? Below you’ll find the ideal sizes for a scratch-free fitment around the 340mm Brembo brakes and Öhlins sprung wheel arches.
| Wheel diameter & construction | Position | Recommended wheel width (J) | Ideal ET range | Recommended tyre size |
|---|---|---|---|---|
| 18 Inch (Lightweight Circuit / Trackday Sweet Spot) | Front & Rear (Square) | 8.5J / 9.0J | ET48 - ET55 | 235/40 R18 (or 245/40 R18 semi-slicks Nankang AR-1 / Cup 2) |
| 18 Inch (OEM+ Flush Fast Road Setup) | Front & Rear (Square) | 8.5J | ET45 - ET52 | 235/40 R18 (or 245/40 R18) |
| 19 Inch (OEM+ Flush Show & Performance Stance) | Front & Rear (Square) | 8.5J / 9.0J | ET45 - ET52 | 235/35 R19 (or 245/35 R19) |
Do you want to push the original 18" Tibor or 19" Steev/Turini factory wheels with their high offset (8.25J ET65) slightly further out to make them sit flush with the rolled R.S. arches?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspensions on 2 to 5 cars daily. We use transparent fixed rates (excl. VAT):
| Part / Service | Labour Rate (Excl. VAT) | Indicative Fit Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Lip Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, factory warranty and APK assurance.
In our webshop you filter parts by Brand, Model, Trim and Year (we deliberately do not use a licence-plate filter to avoid incorrect database matches). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If there is any doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW/Öhlins, Akrapovi?/Remus/Milltek exhausts and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a worry-free APK inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Specification, restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Renault Mégane R.S. 250 / 265 / 275 Trophy (MK3 2.0 Turbo), would you like advice about 340mm Brembo caliper clearance, Speedline / OZ Racing / Motec wheels or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?