Model generation VA Sedan (2014-2021) | 2.5 Turbo EJ257 (300 hp) | Symmetrical AWD with DCCD centre differential

Why is correct wheel fitment crucial for the Subaru WRX STI (VA)?
The Subaru WRX STI (VA generation) is one of the most iconic rally-inspired cars in the world. Equipped with the renowned 2.5 litre EJ257 boxer turbo engine and the Symmetrical AWD system with Driver Controlled Center Differential (DCCD), the STI places strict demands on wheel choice. The car uses the bolt pattern 5x114.3 with a 56.1 mm centre bore. Enthusiasts who switch to wider aftermarket wheels (such as 9.5J width) must use the exact correct offset (ET38-ET45) to avoid rubbing on the shock absorbers and to ensure sufficient spoke clearance over the large black (4-piston) or neon-yellow (6-piston Brembo) calipers. At Wheels 'N Customs in Nijkerk we check every order beforehand based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the Subaru WRX STI VA. Use these as a technical reference when purchasing new wheels or wheel spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt Pattern (PCD) | 5x114.3 | Standard Japanese 5-lug bolt circle on the VA platform. |
| Centre Bore (CB) | 56.1 mm | Subaru centre bore. Hub rings required for larger wheel centre holes (e.g. 73.1 mm). |
| Wheel Fixing Type | M12 x 1.25 Wheel Nuts | Conical 60-degree nuts on aftermarket wheels. Tightening torque of 120 Nm. |
| OEM Wheel Sizes (18" Pre-Facelift 2014-2017) | 8.5J x 18 ET55 | Factory Enkei or BBS forged 10-spoke wheels. |
| OEM Wheel Sizes (19" Facelift 2018-2021) | 8.5J x 19 ET55 | Factory 19 inch Y-spoke alloy wheels. |
| OEM Tyre Sizes | 245\/40 R18 (245\/35 R19 on 19" wheels) | Supplied mounted on Dunlop SP Sport Maxx RT or Yokohama Advan Sport. |
Do you want to outfit your Subaru WRX STI VA with a tighter wheel tuck, a JDM trackday setup or save weight with Flow Formed / Forged wheels from brands like Rays Volk Racing (TE37 / CE28), Enkei (RPF1 / NT03), Rota, JR-Wheels (SL01 / JR11), Motec, Wedssport or Maxton-styling? Below you’ll find the ideal sizes for scratch-free fitment, also when lowered with Eibach, H&R or BC Racing coilovers.
| Wheel Diameter & Construction | Position | Recommended Wheel Width (J) | Ideal ET Value Range | Recommended Tyre Size |
|---|---|---|---|---|
| 18 Inch (OEM+ Comfort / Trackday Setup) | Front & Rear (Square) | 8.5J | ET42 - ET45 | 245/40 R18 |
| 18 Inch (Absolute Sweet Spot Flush JDM Stance) | Front & Rear (Square) | 9.5J | ET38 - ET40 | 255\/35 R18 (or 265\/35 R18 with rolled arches) |
| 19 Inch (Street Performance Sweet Spot) | Front & Rear (Square) | 8.5J / 9.0J | ET40 - ET45 | 245\/35 R19 (or 255\/35 R19) |
| 19 Inch (Aggressive Wide Show Stance) | Front & Rear (Square) | 9.5J | ET38 - ET40 | 255/35 R19 |
Would you like to push the original 18" or 19" factory wheels (8.5J ET55) further out to sit flush with the arches?
In our spacious and professional workshop in Nijkerk we install wheels, exhaust systems, bodykits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Labour Rate (Excl. VAT) | Indicative Fitment Time |
|---|---|---|
| Complete Wheel Set Mounting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Splitter / Bumper Lip / Splitter Installation | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Installation | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Installation | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Installation | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Installation (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Installation (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of over 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect parts ourselves daily, giving you 100% fitment guarantee, factory warranty and MOT-compliance certainty.
In our webshop you can filter parts by Brand, Type, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If there is any doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Invidia/Milltek/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free APK inspection in the Netherlands and car inspection in Belgium.
Under European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Version restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Subaru WRX STI (VA), need advice about Brembo 6-piston caliper clearance or Symmetrical AWD requirements, or would you like an all-in quote including workshop fitting in Nijkerk?