Wheel Fitment Guide - Toyota Supra GR (A90)

Wheels Fitment Guide - Toyota Supra GR (A90)

Model generations A90 & A91 MK5 Coupé (2019-present) | 2.0 B48 Turbo (258 hp) & 3.0 B58 Six-Cylinder Turbo (340 hp & 388 hp) | CLAR Chassis

Wheels Fitment Guide Toyota Supra GR A90 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Toyota Supra GR (A90)?
\r\nThe Toyota Supra GR A90 is the modern rebirth of the iconic Japanese legend. Thanks to the shared CLAR-platform architecture the Supra GR uses the 5x112 bolt pattern with a 66.6 mm centre bore and M14x1.25 wheel bolts. To transfer all the torque of the 3.0 B58 six-cylinder engine to the rear axle, Toyota equips the car with an aggressive wide setup (9.0J front / 10.0J rear). When choosing aftermarket wheels, spoke clearance around the 348 mm 4-piston Brembo calipers is crucial, as well as maintaining the correct offset (ET25-ET35) for a flush stance without rubbing. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Toyota Supra GR A90

The values below represent the original factory parameters of the Toyota Supra GR A90. Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x112 CLAR-platform bolt pattern (note: different from traditional Toyota 5x114.3).
Centre bore (CB) 66.6 mm Modern German centre bore standard. Centre rings required for larger wheel hub holes.
Wheel attachment type M14 x 1.25 Bolts Conical 60-degree seat. Tightening torque of 140 Nm.
OEM Wheel sizes (18" Wide set 2.0) Front: 8.5J x 18 ET32
\r\n Rear: 9.0J x 18 ET32
Factory 5-spoke two-tone alloy wheels.
OEM Wheel sizes (19" Wide set 3.0) Front: 9.0J x 19 ET32
\r\n Rear: 10.0J x 19 ET40
Factory forged two-tone or matt black A91 wheels.
OEM Tyre Sizes (19") Front: 255/35 ZR19
Rear: 275/35 ZR19
Must be fitted with Michelin Pilot Super Sport with XL Load Index.

2. Aftermarket Fitment Guide (19" & 20")

Would you like to give your Supra GR A90 an even wider, concave stance or save weight with Flow Formed / Custom Forged wheels from brands like Rays Volk Racing (TE37 / G025), BC Forged, Concaver, JR-Wheels (SL01), Rotiform, Titan 7 or HKS/Maxton styling? Below you’ll find the ideal sizes for a scratch-free fit, also when lowered with KW V3, Eibach or H&R lowering springs.

Wheel Size & Construction Position Recommended Rim Width (J) Ideal ET Value Range Recommended Tyre Size
19 Inch (Flush OEM+ Street & Track) Front
Rear
9.5J
10.5J / 11.0J
ET22 - ET25
ET32 - ET35
255/35 R19 (or 265/35 R19)
285/35 R19 (or 295/35 R19)
19 Inch (Aggressive JDM Deep Concave Track) Front
Rear
9.5J / 10.0J
10.5J / 11.0J
ET20 - ET22
ET30 - ET33
265/35 R19
295/35 R19 (Requires camber adjustment)
20 Inch (Exclusive Show Stance Wide Set) Front
Rear
9.5J
10.5J / 11.0J
ET22 - ET25
ET32 - ET35
255/30 R20 (or 265/30 R20)
285/30 R20 (or 295/30 R20)

3. Wheel Spacers & Bolt Pattern Adapters for Toyota Supra GR A90

Do you want to push the original 19" factory wheels (9.0J ET32 front / 10.0J ET40 rear) slightly further out to make them sit flush with the arches?

  • Wheel Spacers: On the original 19" factory wheels H&R or Eibach spacers of 12 mm to 15 mm can be fitted at the front and 13 mm to 15 mm at the rear. Use only hub-centric aluminium spacers with the specific 66.6 mm hub bore and extended M14x1.25 wheel bolts.
  • Bolt Pattern Adapters & Fitment Check: Have your eye on an exclusive custom wheelset with a different bolt pattern (e.g. 5x112 to 5x114.3)? Bolt pattern adapters accommodate this, but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the total ET value in advance to prevent the wide rear tyres from contacting the wheel arches when compressing at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we mount wheels, exhaust systems, bodykits and chassis parts on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Labour Mounting Rate (Excl. VAT) Indicative Mounting Time
Complete Wheel Set Mounting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Mounting € 80 - € 120 45 - 60 minutes
Side Skirts Set Mounting € 103 - € 145 60 - 90 minutes
Rear Diffuser Mounting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Mounting € 55 - € 80 30 - 45 minutes
Sidebars Set Mounting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Mounting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-movers"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with our own physical workshop in Nijkerk. We test, mount and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, factory warranty and MOT compliance.

How does Wheels 'N Customs' vehicle check and fitment guarantee work?

In our webshop you filter parts by Brand, Model, Version and Year of Manufacture (we deliberately do not use a license plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Nearly all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus/HKS exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free APK inspection in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and sets fitted with tyres. When returning incorrectly ordered items without prior verification of Brand/Model/Version restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Toyota Supra GR (A90/A91), would you like advice on Brembo caliper clearance or spacers, or would you like to receive an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl