Wheel Fitment Guide - Volkswagen Up! GTI (AA 1.0 TSI Turbo 115 hp)

Wheels Fitment Guide - Volkswagen Up! GTI (AA 1.0 TSI Turbo 115 hp)

Model generation AA / AA1 (2018-2023) | 1.0 TSI EA211 3-Cylinder Turbo (115 hp / 200 Nm) | Lowered GTI Sport Chassis & Clark Tartan Interior

Wheels Fitment Guide Volkswagen Up GTI Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Volkswagen Up! GTI?
The Volkswagen Up! GTI (AA generation, produced from 2018 to 2023 with an approximate new price of around € 19.800,- to € 24.500,-) is widely regarded as the spiritual successor to the original Golf 1 GTI from 1976. Powered by the punchy 1.0-litre 3-cylinder EA211 turbo engine with 115 HP and 200 Nm torque, combined with a weight of only 970 kg and 15 mm lowered GTI suspension, the Up! GTI delivers enormous analogue driving pleasure. The Up! GTI uses the lightweight VAG 4-lug bolt pattern 4x100 with a 57.1 mm centre bore and M12x1.5 wheel bolts. From the factory the Up! GTI is fitted with 17 inch Brands Hatch alloy wheels (6.5J ET39 with 195/40 R17 Goodyear EfficientGrip Performance tyres) or 16 inch winter wheels (6.0J ET43 with 185/50 R16 tyres). When selecting aftermarket wheels (such as 16x7.0J or 17x7.0J with ET35 to ET40) the wheels sit beautifully flush with the wings, which pairs perfectly with Milltek/Remus sports exhausts and Maxton Design front splitters. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Volkswagen Up! GTI

The values below represent the original factory parameters of the Volkswagen Up! GTI (AA 1.0 TSI Turbo). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Pitch circle diameter (PCD) 4x100 Standard VAG 4-bolt bolt circle for the AA platform.
Centre bore (CB) 57.1 mm Standard VAG hub bore. Centre rings required for wheels with a larger hub bore (e.g. 67.1 mm or 73.1 mm).
Wheel fastener type M12 x 1.5 Ball-conical Bolts Tightening torque of 110 Nm recommended by Volkswagen.
OEM Wheel sizes (17" Standard Brands Hatch) 6.5J x 17 ET39 Factory 17 inch two-tone Black/Polished wheels in a square setup.
OEM Wheel sizes (16" Winter Option Merano) 6.0J x 16 ET43 Factory 16 inch Silver or Black alloy wheels.
OEM Tyre sizes 195/40 R17 (on 17") / 185/50 R16 (on 16") Supplied on Goodyear EfficientGrip Performance or Continental PremiumContact 6.

2. Aftermarket Fitment Guide (16" & 17" Up! GTI)

Do you want to give your Volkswagen Up! GTI a wider track, a sportier stance or weight savings with Flow Formed wheels from brands like OZ Racing (Ultraleggera / Alleggerita HLT / Formula HLT in 4x100), JR-Wheels (JR11 / JR21 / JR30 / SL01), Concaver, Motec (Ultralight / Wizard), Autec, BBS (RS-style), Sparco, Milltek, Remus or Maxton-styling? Below you’ll find the ideal sizes for a scratch-free fit, including when lowered with Eibach, H&R, ST Suspension or KW V1 coilovers.

Wheel diameter & construction Position Recommended rim width (J) Ideal ET range Recommended tyre size
16 Inch (Lightweight Street & Track Sweet Spot) Front & Rear (Square) 6.5J / 7.0J ET35 - ET40 195/45 R16 (or 205/45 R16)
17 Inch (OEM+ Flush Street Performance Sweet Spot) Front & Rear (Square) 7.0J ET35 - ET40 195/40 R17 (or 205/40 R17)
17 Inch (Aggressive Stance & Fast Road Setup) Front & Rear (Square) 7.5J ET35 - ET38 195/40 R17 (Light stretch on 7.5J)

3. Spacers & Fitment Notes for Up! GTI

Do you want to push the original 17" Brands Hatch factory wheels (6.5J ET39) slightly further out to sit flush with the arches?

  • Wheel spacers: On the original 6.5J ET39 factory wheels H&R or Eibach spacers of 10 mm to 12 mm can be fitted at the front and 12 mm to 15 mm at the rear. Use only hub-centric aluminium spacers with the specific 4x100 bolt pattern and 57.1 mm hub fitment with extended M12x1.5 wheel bolts.
  • 288mm GTI front brake clearance: The Up! GTI is fitted at the front with enlarged 288 mm discs (shared with the Polo GTI). With virtually all aftermarket 16 and 17 inch wheels there is ample spoke clearance around the brake calipers.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspensions to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Labour Fitting rate (Excl. VAT) Indicative fitting time
Complete wheel set fitting & balancing € 75 - € 115 45 - 60 minutes
Front spoiler / Bumper lip / Splitter fitting € 80 - € 120 45 - 60 minutes
Side skirts set fitting € 103 - € 145 60 - 90 minutes
Rear diffuser fitting € 95 - € 145 45 - 75 minutes
Roof spoiler extension / Boot spoiler fitting € 55 - € 80 30 - 45 minutes
Sidebars set fitting (Commercial vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars fitting (Commercial vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT (APK) certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a number plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the MOT (keuring)?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a worry-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your online order within 14 days. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Make/Model/Version, restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Volkswagen Up! GTI (AA 1.0 TSI Turbo 115 hp), would you like advice on 16 or 17 inch OZ Racing / JR-Wheels wheels or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl