Wheel Fitment Guide - Volvo V60 Polestar (135 3.0 T6 AWD 350 hp)

Wheel Fitment Guide - Volvo V60 Polestar (135 3.0 T6 AWD)

Model generation Type 135 (2014-2016) | 3.0 inline-6 Turbo B6304T5 (350 hp / 500 Nm) | Öhlins Dual Flow Valve Suspension, BorgWarner AWD & Brembo 6-Piston Brakes

Wheel Fitment Guide Volvo V60 Polestar 3.0 T6 Wheels 'N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Volvo V60 Polestar (3.0 T6)?
The Volvo V60 Polestar and S60 Polestar (produced between 2014 and 2016 in limited numbers with an original list price of approximately € 64,000 to € 68,900) are the ultimate Swedish performance estates. Developed in collaboration with Cyan Racing and powered by the iconic 3.0-litre inline six turbo engine (350 hp and 500 Nm torque), a 6-speed Geartronic automatic, manually adjustable Öhlins Dual Flow Valve (DFV) dampers and Haldex/BorgWarner AWD, the 3.0 T6 Polestar is a sought-after collector's car. The V60 Polestar uses PCD 5x108 with a 63.4 mm centre bore and M12x1.5 wheel bolts. From factory, the Polestar comes on specific forged 20 inch 9-spoke alloy wheels (8.0J x 20 ET53 all round with 245/35 R20 Michelin Pilot Super Sport tyres). The most critical technical fitment aspect is the factory-fitted gold/silver 6-piston Brembo calipers and 371 mm perforated floating front brake discs. When selecting aftermarket or 19 inch winter sets (such as 19x8.0J/8.5J ET42 to ET50 from Heico Sportiv, BBS, OZ Racing or JR-Wheels), the spoke curvature is decisive to clear the massive Brembo calipers without rubbing. At Wheels 'N Customs in Nijkerk, we check every order in advance based on your selected Make, Model, Trim, Year and VIN.

The photo below shows the Volvo V60 Polestar in the iconic Rebel Blue with the original forged 20 inch wheels:

Volvo V60 Polestar 3.0 T6 in Rebel Blue with 20 inch wheels and Brembo brakes

1. Factory specifications (OEM) Volvo V60 Polestar 3.0 T6

The values below represent the original factory parameters of the Volvo V60 Polestar & S60 Polestar (135 3.0 T6 B6304T5). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Explanation & Advice
PCD 5x108 Standard Volvo 5-bolt PCD on the P3 platform.
Centre bore (CB) 63.4 mm Standard Volvo P3 centre bore. Hub-centric rings required for wheels with a larger centre bore (e.g. 67.1 mm or 73.1 mm).
Wheel fasteners type M12 x 1.5 Conical Bolts Tightening torque of 140 Nm recommended by Polestar Cyan Racing.
OEM Wheel Sizes (20" Polestar Forged 9-Spoke) 8.0J x 20 ET53 All-round (Square) Factory 20 inch forged alloy wheels in AWD setup.
OEM Tyre Sizes 245/35 R20 All-round Supplied on Michelin Pilot Super Sport or Michelin Pilot Sport 4S with XL Load Index.

2. Aftermarket Fitment Guide (19" & 20" Volvo V60 Polestar)

Would you like to equip your Volvo V60 Polestar with a dedicated 19 inch winter set, a wider stance or weight savings through Flow Formed / Custom Forged wheels from brands such as Heico Sportiv (Volution V / VII in 5x108), BBS (SR / XR), OZ Racing (Superturismo LM / Ultraleggera), JR-Wheels (SL01 / JR21 / JR30), Concaver, Ferrita, Elevate, IPD Volvo or Maxton styling? Below you can see the ideal sizes for a rub-free fitment around the 371mm 6-piston Brembo brakes.

Inch Size & Configuration Position Recommended Wheel Width (J) Ideal ET Value Range Recommended Tyre Size
19 Inch (Lightweight Winter & Trackday Sweet Spot) Front & Rear (Square) 8.0J / 8.5J ET42 - ET50 235/40 R19 All-round (Clears 371mm Brembo brakes without rubbing)
20 Inch (OEM+ Flush Street Performance Sweet Spot) Front & Rear (Square) 8.0J / 8.5J ET45 - ET53 245/35 R20 All-round
20 Inch (Aggressive Deep Concave / Wide Setup) Front & Rear (Square) 8.5J / 9.0J ET40 - ET45 245/35 R20 or 255/35 R20 All-round (Fills the Polestar wheel arches nicely)

3. Spacers & Fitment Considerations for V60 Polestar

Would you like to push the original forged 20" Polestar factory wheels (8.0J ET53) a little further out to make them sit flush with the inner liners and wheel arch edges?

  • Spacers: On the original 8.0J ET53 factory wheels you can fit H&R, Eibach or Heico Sportiv spacers of 10 mm to 12 mm at the front and 12 mm to 15 mm at the rear. Use only hub-centric aluminium spacers with the specific 5x108 PCD and 63.4 mm centre bore with extended M12x1.5 wheel bolts.
  • 371mm 6-Piston Brembo Clearance: The Polestar features extremely wide 6-piston Brembo calipers at the front. When selecting aftermarket 19 or 20 inch wheels, check that the spoke profile curvature maintains at least 4 mm of clearance.

4. Fixed Fitting Rates, Nijkerk Workshop

In our spacious and professional workshop in Nijkerk we install wheels, exhaust systems, body kits and suspension on 2 to 5 cars daily. We use transparent fixed rates (excl. VAT):

Part / Work Installation Rate (Excl. VAT) Indicative Installation Time
Complete Wheel Set Installation & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Installation € 80 - € 120 45 - 60 minutes
Side Skirts Set Installation € 103 - € 145 60 - 90 minutes
Rear Diffuser Installation € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Installation € 55 - € 80 30 - 45 minutes
Sidebars Set Installation (Commercial vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Installation (Commercial vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Installation (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a web shop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, install and inspect the parts ourselves on a daily basis, which gives you a 100% fitment guarantee, factory warranty and APK assurance.

How does Wheels 'N Customs' vehicle check and fitment guarantee work?

In our web shop you filter parts by Make, Model, Version and Year (we deliberately do not use a number plate filter to avoid incorrect database links). After you place your order, our specialists carry out a manual check based on your vehicle data and VIN. If in doubt, within 48 hours we will ask you via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel wells. Only after 100% approval will your order be processed or installed.

Are our fitted wheels and parts approved for inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/Heico, Ferrita/Elevate exhaust systems and body kits from Maxton Design have official German TÜV, ECE or ABE certification. This ensures a hassle-free APK inspection in the Netherlands and vehicle inspection in België.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

According to European Directive 2011/83/EU, for online purchases you have the right to withdraw your order within 14 days. Excluded from the right of withdrawal are specially custom-ordered items, custom-drilled wheels (Custom ET/Blank) and mounted wheel-and-tyre sets. When returning incorrectly ordered items without prior verification of Make/Model/Version, restocking fees of 25% to 40% may apply for inspection and re-packaging.

Get in Touch / Request Advice

Do you have specific questions about the exact fitment for your Volvo V60 Polestar or S60 Polestar (135 3.0 T6 AWD 350 hp), would you like advice on 371mm 6-piston Brembo caliper clearance, 19 or 20 inch Heico Sportiv / BBS / OZ Racing wheels or spacers, or would you like to receive an all-in quotation including workshop installation in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl