Model generation C7.5 Facelift Performance (2015-2018) | 4.0 V8 TFSI BiTurbo (605 hp / 750 Nm Overboost) | Quattro Widebody RS Ceramic

Why is correct wheel fitment crucial for the Audi RS6 Avant Performance (C7.5)?
The Audi RS6 Avant Performance (Generation C7.5 Facelift, produced from 2015 to 2018) is an absolute icon among V8 super estates. Powered by the upgraded 4.0-litre BiTurbo V8 delivering up to 605 HP and 750 Nm torque (in overboost) with Quattro four-wheel drive and a sports differential, the RS6 Performance places strict demands on wheel and tyre sizes. The car features pronounced wide RS fenders. The car uses the VAG bolt pattern 5x112 with a 66.5 mm centre bore and M14x1.5 wheel bolts. From the factory the RS6 Performance C7.5 rides on a 21 inch square setup with specific 5-spoke star-design alloy wheels in titanium-look or gloss black (9.5J ET25 with 283/30 R21 or 285/30 R21 tyres). When selecting aftermarket wheels (such as 10.0J or 10.5J on 21 inch) a low offset (ET18-ET25) is essential to fill the wide arches flush while maintaining sufficient spoke clearance around the 390 mm RS Wave brakes or optional 420 mm RS Ceramic Carbon discs. At Wheels 'N Customs in Nijkerk we pre-check every order based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the Audi RS6 Avant Performance (C7.5 Facelift). Use these as a technical reference when purchasing new wheels or wheel spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x112 | Standard VAG 5-bolt circle on the MLB platform. |
| Hub diameter (CB) | 66.5 mm | Large VAG MLB hub bore. Centre rings required for wheels with a larger hub diameter (e.g. 73.1 mm). |
| Wheel fastener type | M14 x 1.5 Ball-conical Bolts | 140 Nm torque recommended by Audi Sport. |
| OEM Wheel sizes (20" Winter Performance Option) | 9.5J x 20 ET25 | Factory 20 inch 7-twin-spoke RS alloy wheels in a square setup. |
| OEM Wheel sizes (21" Performance Standard 5-V-Spoke) | 9.5J x 21 ET25 | Factory 21 inch 5-V-spoke star-design wheels in Matt Titanium or Gloss Black. |
| OEM Tyre sizes | 275\/35 R20 (on 20") \/ 283\/30 R21 or 285\/30 R21 (on 21") | Supplied on Continental SportContact 6, Pirelli P Zero or Dunlop SP Sport Maxx GT with XL load index and RO1 (Audi Sport spec). |
Do you want to give your Audi RS6 Avant Performance C7.5 an even tighter fill of the wide RS arches, a deep concave look or weight savings using custom forged wheels from brands like Concaver, JR-Wheels (SL01 \/ JR21 \/ JR30), Rotiform, Veemann, Vossen, OZ Racing, BC Forged, ABT Sportsline or Maxton-styling? Below are the ideal sizes for a scratch-free fit, also when lowered with Eibach, H&R or KW coilovers.
| Wheel diameter & construction | Position | Recommended rim width (J) | Ideal ET value range | Recommended tyre size |
|---|---|---|---|---|
| 20 Inch (OEM+ Winter \/ Performance Setup) | Front & Rear (Square) | 9.5J / 10.0J | ET20 - ET25 | 275/35 R20 |
| 21 Inch (Absolute Sweet Spot Street Performance) | Front & Rear (Square) | 10.0J / 10.5J | ET20 - ET25 | 285\/30 R21 (or 295\/30 R21) |
| 21 Inch (Aggressive Deep Concave Show Stance) | Front & Rear (Square) | 10.5J / 11.0J | ET18 - ET22 | 285\/30 R21 (Light stretch on 11.0J) or 295\/30 R21 |
Do you want to push the original 21" Performance factory wheels (9.5J ET25) a bit further out to make them sit flush with the wide arches?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension daily to 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Labour rate (Excl. VAT) | Indicative fitting time |
|---|---|---|
| Complete wheel set mounting & balancing | € 75 - € 115 | 45 - 60 minutes |
| Front spoiler / Bumper lip / Splitter fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Installation | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Installation | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Lip Spoiler Installation | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Installation (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Installation (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Tailpipe (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with our own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT certainty.
In our webshop you filter parts by Make, Model, Variant and Year (we deliberately do not use a registration number filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Capristo/ABT/Milltek exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Variant restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Audi RS6 Avant Performance (C7.5 605 hp), would you like advice about 420mm RS Ceramic caliper clearance or track wideners, or would you like an all-in quote including workshop fitting in Nijkerk?