Wheel Fitment Guide - BMW M2 CS (G87)

Wheels Fitment Guide - BMW M2 CS (G87)

Model generation G87 Limited CS Coupé (2025-present) | 3.0 TwinPower Turbo S58 (525 hp / 650 Nm) | M Carbon Ceramic Brakes & Widebody

Wheels Fitment Guide BMW M2 CS G87 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the BMW M2 CS (G87)?
The BMW M2 CS (G87 Coupé) represents the absolute pinnacle of the compact M range. Powered by the uprated S58 3.0‑litre twin‑turbo inline six producing up to 525 HP and 650 Nm, and equipped with a lightweight carbon roof, boot spoiler and bonnet, this limited series places extreme demands on wheel and tyre sizes. The car uses the modern CLAR bolt pattern 5x112 with a 66.6 mm centre bore and M14x1.25 wheel bolts. Factory fitment for the M2 CS is a unique staggered diameter setup: 19 inch front (9.5J ET20) and 20 inch rear (10.5J ET20) on lightweight forged M Cross‑spoke wheels. Because the M2 CS is fitted as standard with solid 400 mm M Carbon Ceramic Brakes (CCB) with gold 6‑piston calipers, spoke and barrel clearance is of primary importance when purchasing aftermarket or trackday wheels. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) BMW M2 CS G87

The values below represent the original factory parameters of the BMW M2 CS (G87). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x112 CLAR M‑platform 5‑bolt circle bolt pattern.
Centre bore (CB) 66.6 mm Modern BMW centre bore. Hub rings required for larger wheel centre holes (e.g. 73.1 mm).
Wheel fastening type M14 x 1.25 Bolts Conical 60-degree seat. Torque setting of 140 Nm.
OEM Wheel Sizes (19"/20" M Forged CS Special) Front: 9.5J x 19 ET20
Rear: 10.5J x 20 ET20
Factory M Performance lightweight forged wheels in Bronze Gold or Matte Black.
OEM Wheel Sizes (20"/21" M Performance Option) Front: 10.0J x 20 ET20
Rear: 10.5J x 21 ET20
Factory 20/21 inch M Performance Styling 1000M forged wheels.
OEM Tyre Sizes Front: 275/35 ZR19 (275/30 ZR20 on 20")
Rear: 285/30 ZR20 (285/25 ZR21 on 21")
Supplied on Michelin Pilot Sport Cup 2 / Cup 2R with XL load index and Star-Mark (* BMW OEM).

2. Aftermarket Fitment Guide (19"/20" & 20"/21")

Do you want to give your BMW M2 CS G87 an even wider, more concave stance or reduce weight with Flow Formed / Custom Forged wheels from brands such as Apex (ARC-8 / EC-7 / VS-5RS), Concaver, JR-Wheels (SL01 / JR30), BC Forged, Rotiform, Veemann, Vossen, BBS (FI-R EVO) or Maxton-styling? Below you’ll find the ideal sizes for scratch-free fitment, also when lowered with Eibach, H&R or KW HAS/coilovers.

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Value Range Recommended Tyre Size
19"/20" Inch (Apex Trackday / Circuit Sweet Spot) Front
Rear
9.5J / 10.0J
10.5J / 11.0J
ET12 - ET18
ET14 - ET18
275/35 R19 (or 285/35 R19)
285/30 R20 (or 295/30 R20)
20"/20" Inch (Square Track Performance Setup) Front
Rear
10.0J
10.5J / 11.0J
ET12 - ET15
ET12 - ET15
275/30 R20 (or 285/30 R20)
285/30 R20 (or 295/30 R20)
20"/21" Inch (Exclusive Show Performance Wide Set) Front
Rear
10.0J
11.0J
ET12 - ET15
ET12 - ET15
275/30 R20 (or 285/30 R20)
295/25 R21 (or 305/25 R21)

3. Wheel Spacers & Bolt Pattern Adapters for BMW M2 CS G87

Do you want to push the original 19"/20" factory wheels (9.5J ET20 front / 10.5J ET20 rear) a little further out to make them sit flush with the wide M wings?

  • Wheel Spacers: On the original factory wheels H&R or Eibach spacers of 10 mm to 12 mm can be fitted at the front and 10 mm to 12 mm at the rear. Use only hub-centric aluminium spacers with the specific 66.6 mm hub bore and extended M14x1.25 wheel bolts.
  • Bolt Pattern Adapters & Fitment Check: Do you have an exclusive custom wheelset in mind with a different bolt pattern (e.g. 5x112 to 5x120)? Bolt pattern adapters handle this, but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the resulting total ET in advance to prevent the wide rear tyres from contacting the wheel arches during compression at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we daily fit wheels, exhaust systems, bodykits and suspensions on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):

Part / Labour Fitting Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Lip Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-movers"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Brand, Model, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the MOT?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Remus/Eisenmann exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Model/Version restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your BMW M2 CS (G87), would you like advice on M Carbon Ceramic caliper clearance or trackday Apex wheels, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl