Wheel Fitment Guide - BMW M5 (E39 4.9 V8 400 hp S62)

Wheels Fitment Guide - BMW M5 (E39 4.9 V8 400 hp S62)

Model generation E39 (1998-2003) | 4.9 V8 S62B50 Naturally Aspirated (400 hp / 500 Nm) | 6-Speed Getrag Manual, M Limited Slip Differential & Quad Exhaust

Wheels Fitment Guide BMW M5 E39 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the BMW M5 (E39)?
\r\nThe BMW M5 E39 (produced from 1998 to 2003 with an original new-price of approximately € 68.000,- to € 69.900,-) is still regarded as one of the most perfect sports sedans ever built. Powered by the high-revving 4.9-litre S62 V8 engine with double VANOS (400 HP and 500 Nm torque), a manual Getrag 6-speed gearbox, mechanical M limited-slip differential and the characteristic four tailpipes, the E39 M5 is a sought-after youngtimer icon. Technical fitment on the E39 M5 requires extreme attention: the E39 5-Series is the only BMW generation with a larger centre bore of 74.1 mm (instead of the standard 72.6 mm on other 5x120 BMWs). Wheels from other BMW models therefore do not fit without machining the centre bore out to 74.1 mm or using specific hub-centric spacer adapters. Factory-fitted, the E39 M5 rides on staggered 18 inch M Double-Spoke Style 65 wheels in Chrome Shadow finish (8.0J ET20 front with 245/40 R18 & 9.5J ET22 rear with 275/35 R18 Michelin Pilot Sport tyres). When selecting period-correct or modern staggered sets (such as 18x8.5J/9.5J or 19x8.5J/10.0J from BBS, AC Schnitzer, Hamann or Apex) with the specific 74.1 mm E39 centre bore the rear stance becomes impressively tight. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year of Manufacture and chassis number.

1. Factory specifications (OEM) BMW M5 E39

The values below represent the original factory parameters of the BMW M5 (E39 4.9 V8 S62). Use these as technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x120 Standard BMW 5-bolt pitch circle on the E39 platform.
Centre bore (CB) 74.1 mm (Specific to E39!) Unique E39 centre bore. Wheels with a 72.6 mm centre bore DO NOT fit without adapters or machining out! Wheels with 74.1 mm fit directly.
Wheel fixing type M12 x 1.5 Conical Bolts Tightening torque of 120 Nm recommended by BMW M GmbH.
OEM wheel sizes (18" Staggered Style 65 Chrome Shadow) 8.0J x 18 ET20 Front
\r\n\t\t\t9.5J x 18 ET22 Rear
Factory 18 inch M Double-Spoke alloy staggered set in Chrome Shadow finish.
OEM tyre sizes 245/40 R18 Front
\r\n\t\t\t275/35 R18 Rear
Supplied on Michelin Pilot Sport PS2 / Pilot Sport 4S or Continental SportContact with XL Load Index.

2. Aftermarket Fitment Guide (18" & 19" BMW M5 E39)

Do you want to give your BMW M5 E39 a period-correct classic look, a staggered set with deep concavity or the well-known 'Square Setup' (4x rear wheel sizes) using wheels from brands such as BBS (LM / CH / RS-GT in E39 74.1mm fitment), Apex Wheels (ARC-8 / EC-7), AC Schnitzer (Type III / Type IV), Rondell (Style 58), JR-Wheels (JR11 / JR23 in custom ET/centre bore), Eisenmann, Supersprint or Maxton styling? Below you will find the ideal sizes for a scratch-free fitment, also with lowering using Eibach, H&R or KW V1/V3 coilovers.

Wheel diameter & construction Position Recommended wheel width (J) Ideal ET value range Recommended tyre size
18 Inch (OEM+ Flush Street Staggered Sweet Spot) Front
\r\n\t\t\tRear
8.5J Front
\r\n\t\t\t9.5J Rear
ET15 - ET20
\r\n\t\t\tET18 - ET22
245/40 R18 Front
\r\n\t\t\t275/35 R18 Rear
18 Inch (Iconic 'Square 9.5J' Trackday Setup) Front & Rear (Square) 9.5J Front & Rear ET20 - ET22 275/35 R18 All-round (Requires 3 to 5 mm spacer on front axle to clear strut)
19 Inch (Period-Correct Classic Show Wideset) Front
Rear
8.5J Front
9.5J or 10.0J Rear
ET15 - ET18
ET18 - ET22
245/35 R19 Front
275/30 R19 or 285/30 R19 Rear

3. Spacers & Fitting Rules for M5 E39

Do you want to push the original 18" Style 65 factory wheels (8.0J ET20 / 9.5J ET22) further out to make them sit flush with the hips of the M5?

  • Spacers: On the original factory wheels H&R or Eibach spacers from 10 mm to 12 mm can be fitted at the front and 10 mm to 15 mm at the rear. Use only hub-centred aluminium spacers with the specific 5x120 bolt pattern and the **exact E39 hub diameter of 74.1 mm** with extended M12x1.5 wheel bolts.
  • Hub adapters (74.1 mm to 72.6 mm): Do you want to fit 5x120 wheels from an M3 (E46/E92) or M5 (E60/F10)? Then you need specific through-hub adapters that adapt the E39 74.1mm vehicle hub to the 72.6mm wheel hub.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Labour Fitting Rate (Excl. VAT) Indicative Fitting Time
Complete Wheelset Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Terms

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does the vehicle inspection and fitment guarantee of Wheels 'N Customs work?

In our webshop you filter parts by Brand, Model, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Eisenmann/Supersprint exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the terms for withdrawal and returns (Directive 2011/83/EU)?

According to European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification, restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact 74.1 mm fitment for your BMW M5 (E39 4.9 V8 400 hp), would you like advice on 18 or 19 inch BBS / Style 65 / Apex widewheel sets or hub adapter wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl