Model generation E89 Roadster (2009-2016) | 3.0 N54 inline-6 Biturbo (306 hp / 340 hp 35is - 500 Nm Overboost) | 7-Speed DKG Dual-Clutch & Adaptive M Chassis

Why is correct wheel fitment crucial for the BMW Z4 sDrive35i & sDrive35is (E89)?
\r\nThe BMW Z4 E89 top models (sDrive35i with 306 HP and the flagship sDrive35is with 340 HP and 500 Nm overboost torque, produced from 2009 to 2016 with an original new price of approximately € 61.500,- to € 69.800,-) combine a classic long bonnet with an electrically folding hardtop. Powered by the iconic 3.0-litre N54 six-cylinder biturbo engine with twin VANOS and a lightning-fast 7-speed DKG dual-clutch transmission, the E89 35i/35is is a desirable rear-wheel-drive cruiser-sports car. The E89 uses the bolt pattern 5x120 with a 72.6 mm centre bore and M12x1.5 wheel bolts. Crucial for the Z4 E89 is the factory Staggered (wide set) configuration. Factory-fitted, the 35i/35is rides on 18 inch Style 293 / Style 276 wheels (8.0J ET29 front & 8.5J ET40 rear) or the M Sport 19 inch Style 326M / Style 296 wheels (8.0J ET29 front with 225/35 R19 & 9.0J ET40 rear with 255/30 R19 Bridgestone Potenza RE050A RFT tyres). Because the factory offset on the front axle is very low (ET29 on 8.0J), selecting aftermarket wide sets (such as 19x8.5J ET25-ET30 front & 19x9.5J ET35-ET40 rear from BBS, Apex or Japan Racing) gives deeper concavity and perfectly aligned wheel arches. At Wheels 'N Customs in Nijkerk we check every order beforehand based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the BMW Z4 sDrive35i & sDrive35is (E89 3.0 Biturbo). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x120 | Standard BMW 5-lug bolt circle on the E89 platform. |
| Centre bore (CB) | 72.6 mm | Standard BMW E-series centre bore. Centre rings required for wheels with a larger bore (e.g. 74.1 mm). |
| Wheel fixing type | M12 x 1.5 Conical Bolts | A torque of 120 Nm recommended by BMW M GmbH. |
| OEM Wheel sizes (18" Standard Staggered Style 293/276) | 8.0J x 18 ET29 Front \r\n\t\t\t8.5J x 18 ET40 Rear |
Factory 18 inch alloy wide set in RWD configuration. |
| OEM Wheel sizes (19" M Sport Staggered Style 326M/296) | 8.0J x 19 ET29 Front \r\n\t\t\t9.0J x 19 ET40 Rear |
Factory 19 inch M Sport alloy wide set in Sterling Silver. |
| OEM Tyre sizes | 225/40 R18 Front & 255/35 R18 Rear (18") \r\n\t\t\t225/35 R19 Front & 255/30 R19 Rear (19") |
Supplied on Bridgestone Potenza RE050A RFT RunFlat or Michelin Pilot Sport 4S with XL Load Index. |
Do you want to fit your BMW Z4 E89 with a wider rear axle, deeper concavity or save weight using Flow Formed wheels from brands such as BBS (CH-R / CI-R / LM in 5x120), Apex Wheels (ARC-8 / EC-7 / VS-5RS), JR-Wheels (JR21 / JR30 / SL01), Concaver, OZ Racing (Ultraleggera / Superturismo LM), Remus, Eisenmann, Milltek, Schmiedmann or Maxton-styling? Below you will find the ideal sizes for scratch-free fitting, even when lowered with Eibach Pro-Kit, H&R or KW V1/V3/DDC coilovers.
| Wheel diameter & construction | Position | Recommended wheel width (J) | Ideal ET value range | Recommended tyre size |
|---|---|---|---|---|
| 18 Inch (OEM+ Flush Street Performance Wide Set) | Front \r\n\t\t\tRear |
8.5J Front \r\n\t\t\t9.5J Rear |
ET25 - ET30 ET35 - ET40 |
225/40 R18 Front 255/35 R18 Rear |
| 19 Inch (OEM+ Flush Fast Road Wide Set Sweet Spot) | Front Rear |
8.5J Front 9.5J Rear |
ET25 - ET30 ET35 - ET40 |
235/35 R19 Front 265/30 R19 Rear |
| 19 Inch (Aggressive Deep Concave / Stance Wide Set) | Front Rear |
9.0J Front 10.0J Rear |
ET22 - ET28 ET32 - ET38 |
235/35 R19 Front 265/30 R19 Rear (Light stretch on 10.0J rear) |
Would you like to push the original 18" or 19" M factory wheels (8.0J ET29 / 9.0J ET40) slightly further out so they sit flush with the body hips?
In our spacious, professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspensions daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Activity | Fitting Rate (Excl. VAT) | Indicative Fitting Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Splitter / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Lip Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of over 250,000 items with its own physical workshop in Nijkerk. We test, fit and check the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT confidence.
In our webshop you filter parts by Brand, Model, Version and Year (we deliberately do not use a licence-plate filter to avoid incorrect database matches). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Remus/Eisenmann/Milltek exhausts and bodykits from Maxton Design carry official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-order items, custom-drilled wheels (Custom ET/Blank) and mounted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Type/Specification, restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your BMW Z4 sDrive35i or sDrive35is (E89 3.0 Turbo), would you like advice on 18 or 19 inch BBS / Apex / JR-Wheels wide sets or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?