Wheel Fitment Guide - Cadillac CTS-V Coupé & Sedan (G2 6.2 V8 Supercharged 564 pk)

Wheels Fitment Guide - Cadillac CTS-V Coupe & Sedan (G2 6.2 V8 Supercharged)

Model generation G2 (2009-2015) | 6.2 V8 LSA Supercharged (564 hp / 747 Nm) | Tremec TR-6060 Manual / Tremec Auto, Magnetic Ride Control & Brembo 6-Piston Brakes

Wheels Fitment Guide Cadillac CTS-V G2 Wheels 'N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Cadillac CTS-V (G2)?
The Cadillac CTS-V G2 (produced from 2009 to 2015 in Sedan, Coupé and Wagon with an original new price of approximately € 64.000,- to € 69.500,-) is the ultimate American Nürburgring beast. Powered by the legendary 6.2-litre LSA V8 engine with Eaton Roots supercharger (564 HP and 747 Nm torque), a manual Tremec TR-6060 6-speed or 6L90 automatic gearbox and magnetically adaptive dampers (Magnetic Ride Control), the CTS-V set a sub-8-minute lap time on the Nordschleife as the first production sedan to do so. The CTS-V G2 uses the 5x120 bolt pattern with a 67.1 mm hub bore and M14x1.5 wheel nuts. Crucial for the CTS-V is the factory Staggered (wide-set) arrangement. Factory-fitted, the CTS-V rides on forged 19 inch 10-spoke wheels in Liquid Silver or Satin Graphite (9.0J ET51 front with 255/40 R19 & 9.5J ET56 rear on Sedan/Wagon or 10.0J ET40 rear on Coupé with 285/35 R19 Michelin Pilot Sport PS2 tyres). To accommodate the massive 6-piston Brembo calipers and 380 mm drilled discs at the front and to avoid clearance issues, precise wheel selection is required. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Version, Year and chassis number.

1. Factory specifications (OEM) Cadillac CTS-V G2

The values below represent the original factory parameters of the Cadillac CTS-V Coupé & Sedan (G2 6.2 V8 LSA Supercharged). Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory value (OEM) Notes & Advice
Bolt Pattern (PCD) 5x120 Standard GM high-performance 5-lug bolt circle on the Sigma II platform.
Hub Diameter (CB) 67.1 mm Standard GM hub bore. Centre rings required for wheels with a larger hub bore (e.g. 72.6 mm or 74.1 mm).
Wheel Fastening Type M14 x 1.5 Conical Nuts 140 Nm torque recommended by Cadillac V-Series.
OEM Wheel Sizes (19" Forged Liquid Silver / Graphite Sedan) 9.0J x 19 ET51 Front
9.5J x 19 ET56 Rear
Factory 19 inch forged aluminium wide-set on Sedan and Wagon.
OEM Wheel Sizes (19" Forged Liquid Silver / Graphite Coupé) 9.0J x 19 ET51 Front
10.0J x 19 ET40 Rear
Factory 19 inch forged aluminium wide-set on the widened Coupé rear axle.
OEM Tyre Sizes 255/40 R19 Front
285/35 R19 Rear
Supplied on Michelin Pilot Sport PS2 or Michelin Pilot Sport 4S with XL load index.

2. Aftermarket Fitment Guide (19" & 20" Cadillac CTS-V G2)

Do you want to fit your Cadillac CTS-V G2 with a wider rear track, deeper concavity or weight savings using Flow Formed / Custom Forged wheels from brands like Forgestar (F14 in 5x120), Velgen Wheels (VMB5 / VF5), Vossen (HF-2 / HF-5), Apex Wheels (SM-10 / VS-5RS), Weld Racing (S71 Drag Setup), Corsa, Corsa Performance, Kooks or Maxton styling? Below you will find the ideal sizes for a scratch-free fit around the 380 mm 6-piston Brembo brakes.

Wheel diameter & construction Position Recommended Wheel Width (J) Ideal ET Value Range Recommended Tyre Size
19 Inch (OEM+ Flush Street Performance Wide-set Sweet Spot) Front
Rear
9.0J Front
10.0J or 10.5J Rear
ET35 - ET45
ET40 - ET50
255/40 R19 Front
285/35 R19 (or 295/35 R19) Rear
19 Inch (Aggressive Trackday / Drag Setup Wide-set) Front
Rear
9.5J Front
\n\t\t\t10.5J or 11.0J Rear
ET32 - ET38
\n\t\t\tET38 - ET45
265/35 R19 Front
\n\t\t\t305/30 R19 Rear (Mickey Thompson / Toyo R888R)
20 Inch (Show & Stance Performance Wide Set) Front
\n\t\t\tBack
9.0J Front
\n\t\t\t10.5J Rear
ET35 - ET40
\n\t\t\tET40 - ET45
255/35 R20 Front
\n\t\t\t295/30 R20 Rear

3. Wheel Spacers & Fitting Rules for CTS-V G2

Do you want to push the original forged 19" factory wheels (9.0J ET51 / 9.5J ET56 / 10.0J ET40) slightly further out to make them sit flush with the Cadillac's hips?

  • Wheel Spacers (Spacers): On the original factory wheels H&R, Eibach or billet aluminium spacers from 12 mm to 15 mm at the front and 15 mm to 20 mm at the rear can be fitted. Use only hub-centric aluminium spacers with the specific 5x120 bolt pattern and 67.1 mm hub bore with extended M14x1.5 wheel studs.
  • 380mm 6-Piston Brembo Clearance: The CTS-V G2 has aluminium 6-piston Brembo calipers up front and 380 mm drilled dual-cast discs. When selecting aftermarket 19 or 20 inch alloy wheels sufficient spoke clearance is required.

4. Fixed Workshop Labour Rates Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspensions to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Item / Labour Fitting Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fit & Balance € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fit € 80 - € 120 45 - 60 minutes
Side Skirts Set Fit € 103 - € 145 60 - 90 minutes
Rear Diffuser Fit € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fit € 55 - € 80 30 - 45 minutes
Sidebars Set Fit (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fit (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with our own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves daily, which gives you 100% fitment guarantee, factory warranty and MOT assurance.

How does Wheels 'N Customs' vehicle check and fitment guarantee work?

In our webshop you filter parts by Make, Model, Variant and Year (we deliberately do not use a registration plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are the wheels and parts we fit approved for inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Corsa/Kooks exhausts and Maxton Design bodykits have official German TÜV, ECE or ABE certification. This ensures a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

According to European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are items specially made to measure, custom-drilled wheels (Custom ET/Blank) and mounted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Variant restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Cadillac CTS-V Coupé or Sedan (G2 6.2 V8 Supercharged 564 hp), would you like advice on 380mm 6-piston Brembo caliper clearance, 19 or 20 inch Forgestar / Velgen Wheels / Vossen wide sets or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl