Wheels Fitment Guide: Ford Fiesta ST / ST-Line MK8 (2017-2023)
Why is a specific wheel fitment so important on the Fiesta ST MK8?
The Ford Fiesta ST MK8 features a renowned sporty chassis with patented vectoring springs and an optional Quaife mechanical limited-slip differential. Ford uses the unique 4x108 bolt pattern. An incorrect ET not only disrupts the steering track of the front axle, but on lowered cars can cause rubbing against the plastic inner wheel arch.
1. Original Factory Specifications (OEM Fits)
The factory values below apply to the Ford Fiesta MK8 (ST-Line, ST200, ST Performance Edition and MK8.5 Facelift):
| Specification |
Factory Value (OEM) |
Expert Note |
| Bolt Pattern (PCD) |
4x108 |
Classic Ford 4-stud bolt pattern. |
| Centre Bore (CB) |
63.4 mm |
Specific Ford centre bore; centre rings required for aftermarket wheels with a larger centre hole. |
| OEM Wheel Sizes |
17 and 18 Inch |
17" (ST-Line / ST standard), 18" (ST Performance / Magnetic Grey OEM options). |
| OEM ET Range |
ET42.5 - ET47.5 |
Factory 18x7.5J wheels have an ET of ET42.5. |
| Wheel Fixing |
M12 x 1.5 Conical (60°) |
Fastening via M12x1.5 conical wheel nuts (open or closed). |
| Tightening Torque |
135 Nm |
Tighten according to specification with a calibrated torque wrench. |
2. Aftermarket Fitment Guide (What fits safely?)
Want the wheel to sit tighter in the arch ('flush fitment') without the tyres rubbing during cornering? Check the recommended aftermarket sizes:
| Size |
Wheel Width (J) |
Ideal ET Value |
Recommended Tyre Size |
Fitment Character |
| 17 Inch (Track Setup) |
17x7.5J / 17x8.0J |
ET38 - ET42 |
205/45 R17 or 215/45 R17 |
Lightweight, maximum grip, lower rotating mass for trackdays. |
| 18 Inch (Street / Show) |
18x7.5J / 18x8.0J |
ET40 - ET42.5 |
215/40 R18 |
Most Popular Choice! Fills the wheel arch nicely, no rubbing during sporty use. |
3. Spacers, Bolt Pattern Adapters & Lowering Advice
The Ford Fiesta ST MK8 is well suited to subtle visual and dynamic upgrades.
- Wheel spacers (Spacers): Are you running the original 18 inch ST wheels (18x7.5J ET42.5)? A spacer set of 12 mm per side at the front and 15 mm per side at the rear gives a perfect flush look. Always use spacers with an integrated centre ring (63.4 mm) and extended wheel studs/nuts!
- Lowering (Eibach / H&R / KW): With a set of Eibach Pro-Kit (20 mm) or H&R lowering springs (30 mm) a 18x8.0J ET40 wheel will remain completely clearance-free. If you go extremely low with a KW V3 coilover set, allow for a minimum ET value of ET42 to protect the inner arch lip.
- Hub adapters (Bolt pattern conversion): Because the 4x108 bolt pattern offers fewer aftermarket designs, adapters to 5x112 or 4x100 are often chosen. With custom adapters at least 20 mm thick you can fit exclusive wheels. Bear in mind that the wheel’s effective ET value decreases by 20 mm!
4. Frequently Asked Questions (FAQ)
Do 18 inch wheels rub on a lowered Fiesta ST MK8?
No, provided you choose a wheel width of maximum 8.0J with an ET value between ET40 and ET45 combined with 215/40 R18 tyres. Even with a 30 mm drop on H&R springs this combination remains rub-free.
Do wheels from a Fiesta MK7 fit a Fiesta MK8?
The bolt pattern (4x108) and hub diameter (63.4 mm) are the same, but the factory ET on the MK8 is slightly different (ET42.5 versus ET47.5 on the MK7). Original MK7 wheels therefore sit a little deeper in the MK8 wheel arches, which can be easily compensated with a thin 5 mm spacer.
Do I need special wheel nuts for my alloy wheels?
Ford uses factory wheel nuts with a specific conical seating. Virtually all aftermarket wheels (such as Bola, Team Dynamics, Sparco, JR-Wheels) require aftermarket 60° conical M12x1.5 wheel nuts. Never use the original Ford cover nuts on aftermarket wheels!
Expert Advice For Your Ford Fiesta ST
Want to be 100% sure your chosen wheel set, spacers or lowering kit will fit your Ford Fiesta MK8 perfectly? Contact the experts at Wheels 'N Customs in Nijkerk directly.
Ask Our Experts For Advice