Wheel Fitment Guide - Ford Mustang Shelby GT350 & GT350R (S550 5.2 V8 Voodoo 533 hp)

Wheels Fitment Guide - Ford Mustang Shelby GT350 & GT350R (S550 5.2 V8 Voodoo)

Model generation S550 (2015–2020) | 5.2 V8 Flat‑Plane Crank Voodoo (533 hp / 582 Nm - 8,250 RPM) | Tremec TR‑3160 Manual, MagneRide Suspension & Brembo 6‑Piston Brakes

Wheels Fitment Guide Ford Mustang Shelby GT350 S550 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Ford Mustang Shelby GT350 (S550)?
The Ford Mustang Shelby GT350 and the hardcore GT350R track model (S550 generation, produced from 2015 to 2020 with an original new price of approx. $56,000,- to $68,500,- / approx. €62,000,- to €69,900,-) are among the most exciting muscle cars ever. Powered by the iconic 5.2-litre naturally aspirated 'Voodoo' V8 with a flat-plane crank that revs to 8,250 rpm (533 HP and 582 Nm torque), a manual Tremec TR-3160 6-speed, Torsen limited-slip differential and magnetic dampers (MagneRide), the GT350 is built for the track. The GT350 uses the 5x114.3 bolt pattern with a 70.5 mm centre bore and M14x1.25 wheel bolts. Crucial for the Shelby GT350 is that it features widened aluminium front fenders, causing standard Mustang GT wheels to sit far too recessed. Factory-fit the GT350 rides on extremely wide forged 19-inch wheels (10.5J ET30 front with 295/35 R19 & 11.0J ET62 rear with 305/35 R19 Michelin Pilot Super Sport / Cup 2 tyres). To clear the gigantic 6-piston Brembo calipers and 394 mm vented floating front discs, precise wheel selection is required. At Wheels 'N Customs in Nijkerk we pre-check every order based on your selected Make, Model, Variant, Year and chassis number.

The photo below shows the Ford Mustang Shelby GT350 S550 with the famous striping and alloy widebody set on the track:

Ford Mustang Shelby GT350 S550 in white with blue striping and alloy wheels

1. Factory specifications (OEM) Ford Mustang Shelby GT350 S550

The values below represent the original factory parameters of the Ford Mustang Shelby GT350 & GT350R (S550 5.2 V8 Voodoo). Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory value (OEM) Explanation & Advice
Bolt Pattern (PCD) 5x114.3 Standard Ford Performance 5-lug bolt circle on the S550 platform.
Centre Bore (CB) 70.5 mm Standard Ford Mustang S550 centre bore. Hub rings needed for wheels with a larger centre bore (e.g. 73.1 mm).
Wheel Fastening Type M14 x 1.5 Conical Nuts Torque of 201 Nm recommended by Ford Performance / Shelby.
OEM Wheel Sizes (19" Shelby GT350 Ebony Black Staggered) 10.5J x 19 ET30 Front
11.0J x 19 ET62 Rear
Factory 19-inch alloy staggered set made specifically for the widened GT350 bodywork.
OEM Wheel Sizes (19" Shelby GT350R Carbon Fiber Staggered) 11.0J x 19 ET24 Front
11.5J x 19 ET56 Rear
Exclusive factory carbon fibre (Carbon Fiber) wheels on the GT350R.
OEM Tyre Sizes 295/35 R19 Front & 305/35 R19 Rear (GT350)
305/30 R19 Front & 315/30 R19 Rear (GT350R)
Supplied on Michelin Pilot Super Sport or Michelin Pilot Sport Cup 2 (Shelby OEM spec) with XL Load Index.

2. Aftermarket Fitment Guide (19" & 20" Shelby GT350 S550)

Do you want to equip your Ford Mustang Shelby GT350 with a dedicated circuit/trackday wheelset, aggressive concavity or weight savings using Custom Forged / Flow Formed wheels from brands such as Project 6GR (GT350 Spec in 5x114.3), Apex Wheels (SM-10 / VS-5RS), Signature Wheel, BC Forged, Velgen Wheels (VF5), Kooks, Borla, Corsa, Steeda, Ford Performance or Maxton-styling? Below you will find the ideal sizes for a scratch-free fitment around the 394mm 6-piston Brembo brakes.

Wheel diameter & construction Position Recommended Wheel Width (J) Ideal ET Value Range Recommended Tyre Size
19 Inch (Lightweight Circuit / Trackday Sweet Spot) Front
Rear
10.5J Front
11.0J Rear
ET24 - ET30
ET50 - ET60
295/35 R19 Front
305/35 R19 Rear (Semi-slicks Michelin Cup 2 / Nankang AR-1)
20 Inch (OEM+ Flush Fast Road Wide-set Sweet Spot) Front
Rear
10.0J or 10.5J Front
11.0J Rear
ET25 - ET30
ET50 - ET55
285/30 R20 Front
305/30 R20 Rear
20 Inch (Aggressive Deep Concave / Wide Breedset) Front
Rear
10.5J Front
11.5J Rear
ET22 - ET28
ET48 - ET54
295/30 R20 Front
315/30 R20 Rear (Fills the widened GT350 wheelarches to the maximum)

3. Wheel Spacers & Fitting Rules for Shelby GT350

Would you like to push the original 19" GT350 factory wheels (10.5J ET30 / 11.0J ET62) slightly further out to make them sit flush with the aluminium front wings?

  • Wheel Spacers: On the original 10.5J ET30 / 11.0J ET62 factory wheels H&R, Eibach or Steeda spacers of 10 mm to 12 mm at the front and 15 mm to 20 mm at the rear can be fitted. Use only hub-centric aluminium spacers with the specific 5x114.3 bolt pattern and 70.5 mm centre bore with extended M14x1.5 wheel studs.
  • 394mm 6-Piston Brembo Clearance: The GT350 has massive 6-piston Brembo calipers and 394 mm ventilated floating discs at the front. When selecting aftermarket 19 or 20 inch alloy wheels there must be ample spoke clearance around the front brake calipers.

4. Fixed Workshop Labour Rates Nijkerk

In our spacious and professional workshop in Nijkerk we mount wheels, exhausts, bodykits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Labour Fitting Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Splitter / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Vans / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Vans / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer's warranty and MOT assurance.

How does the vehicle inspection and fitment guarantee of Wheels 'N Customs work?

In our webshop you filter parts by Brand, Type, Variant and Year (we deliberately do not use a licence plate filter to avoid incorrect database matches). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheelarches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/Steeda, Borla/Corsa exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially ordered custom items, custom-drilled wheels (Custom ET/Blank) and mounted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification, restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about exact fitment for your Ford Mustang Shelby GT350 or GT350R (S550 5.2 V8 Voodoo 533 hp), would you like advice on 394mm 6-piston Brembo caliper clearance, 19 or 20 inch Project 6GR / Apex wide sets or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl