Wheel Fitment Guide - Infiniti Q50S 3.0t Red Sport 400 (V37 3.0 V6 TwinTurbo 405 pk)

Wheels Fitment Guide - Infiniti Q50S 3.0t Red Sport 400 (V37 3.0 V6 TwinTurbo)

Model generation V37 (2016-2024) | 3.0 V6 TwinTurbo VR30DDTT (405 hp / 475 Nm) | Dynamic Digital Suspension & Akebono 4-Piston Sport Brakes

Wheels Fitment Guide Infiniti Q50 Red Sport 400 Wheels 'N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Infiniti Q50S Red Sport 400 (V37)?
\r\nThe Infiniti Q50S 3.0t Red Sport 400 (V37 generation, produced from 2016 with an original new price of approximately € 62.500,- to € 68.000,-) is a distinctive Japanese V6 TwinTurbo sports saloon. Powered by the impressive 3.0-litre VR30DDTT V6 engine with twin turbochargers and intercoolers (405 HP and 475 Nm torque), a 7-speed sport automatic, electronic Dynamic Digital Suspension and optional Direct Adaptive Steering, the Red Sport 400 delivers stunning mid-range acceleration. The Q50 Red Sport 400 uses the bolt pattern 5x114.3 with a 66.1 mm centre bore and M12x1.25 wheel nuts. Crucial for the Red Sport 400 RWD is the factory Staggered (wide-set) configuration. Factory-fitted the Red Sport sits on forged 19 inch 10-spoke wheels in Dark Chrome finish (9.0J ET47 front with 245/40 R19 & 9.5J ET50 rear with 265/35 R19 Dunlop SP Sport MAXX 050 DSST RunFlat tyres). To accommodate the silver or red 4-piston Akebono Sport calipers and 355 mm ventilated discs at the front and to avoid rubbing, an accurate ET value is required. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Specification, Year of Manufacture and chassis number.

The image below shows a red Infiniti Q50S 3.0t Red Sport 400 with the original forged 19 inch Dark Chrome wide-set:

Infiniti Q50S Red Sport 400 in red with original 19 inch alloy wheels

1. Factory specifications (OEM) Infiniti Q50 Red Sport 400

The values below represent the original factory parameters of the Infiniti Q50S 3.0t Red Sport 400 (V37 3.0 V6 VR30DDTT). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Explanation & Advice
Bolt Pattern (PCD) 5x114.3 Standard Infiniti / Nissan 5-lug bolt circle on the V37 platform.
Centre Bore (CB) 66.1 mm Standard Nissan / Infiniti hub bore. Hub centric rings required for wheels with a larger centre bore (e.g. 73.1 mm).
Wheel Fastening Type M12 x 1.25 Conical Nuts Torque of 108 Nm recommended by Infiniti Motorsport.
OEM Wheel Sizes (19" Forged Dark Chrome Staggered) 9.0J x 19 ET47 Front
\r\n 9.5J x 19 ET50 Rear
Factory 19 inch forged alloy wide-set on RWD models.
OEM Tyre Sizes 245/40 R19 Front
\r\n 265/35 R19 Rear
Supplied on Dunlop SP Sport MAXX 050 DSST RunFlat or Bridgestone Potenza S001 with XL Load Index.

2. Aftermarket Fitment Guide (19" & 20" Q50 Red Sport 400)

Do you want to equip your Infiniti Q50 Red Sport 400 with a wider rear axle, a deeper concave or weight savings using Flow Formed / Custom Forged JDM wheels from brands such as Rays VOLK (TE37 / Gram Lights 57FXZ in 5x114.3), Work Wheels (EMOTION ZR10 / Work Emotion D9R), SSR, Vossen (HF-3 / HF-5), JR-Wheels (SL01 / JR30 / JR11), Concaver, Fast Intentions, AMS Performance, FI Exhaust or Maxton-styling? Below you will find the ideal sizes for a scratch-free fitment around the 355mm 4-piston Akebono sport brakes.

Wheel diameter & construction Position Recommended Wheel Width (J) Ideal ET Value Range Recommended Tyre Size
19 Inch (OEM+ Flush Street Performance Wide-set Sweet Spot) Front
\r\n Rear
9.0J Front
\r\n 10.0J Rear
ET35 - ET45
\r\n ET40 - ET48
245/40 R19 Front
\r\n 275/35 R19 Rear
20 Inch (OEM+ Flush Fast Road Wide-set Sweet Spot) Front
\r\n Rear
9.0J Front
10.0J or 10.5J Rear
ET35 - ET40
ET40 - ET45
245/35 R20 Front
285/30 R20 Rear
20 Inch (Aggressive Deep Concave / Stance Wide Set) Front
Rear
9.5J Front
10.5J Rear
ET32 - ET38
ET38 - ET42
255/35 R20 Front
285/30 R20 Rear (Light stretch on 10.5J rear)

3. Wheel Spacers & Fitting Rules for Q50 Red Sport

Would you like to push the original forged 19" Dark Chrome factory wheels (9.0J ET47 / 9.5J ET50) a little further out to make them sit flush with the Q50's wheel arches?

  • Wheel Spacers: On the original factory wheels H&R, Eibach or Z1 Motorsports spacers from 12 mm to 15 mm at the front and 15 mm to 20 mm at the rear can be fitted. Use only hub-centric aluminium spacers with the specific 5x114.3 bolt pattern and 66.1 mm hub bore with extended M12x1.25 wheel studs.
  • 355mm 4-Piston Akebono Clearance: The Red Sport 400 has 4-piston Akebono calipers at the front. When selecting aftermarket 19 or 20 inch alloy wheels, ample spoke clearance around the front calipers is required.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspensions daily on 2 to 5 cars. We use transparent fixed rates (excl. VAT):

Part / Service Labour Rate (Excl. VAT) Indicative Labour Time
Complete Wheel Set Fitment & Balancing € 75 - € 115 45 - 60 minutes
Front Lip / Bumper Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitment (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, manufacturer warranty and MOT certainty.

How does Wheels 'N Customs' vehicle check and fitment guarantee work?

In our webshop you filter parts by Brand, Model, Version and Year (we deliberately do not use a licence-plate filter to avoid incorrect database matches). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Fast Intentions/AMS exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

According to the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Specification restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Infiniti Q50S 3.0t Red Sport 400 (V37 3.0 V6 TwinTurbo 405 hp), would you like advice on 19 or 20 inch Rays / Work / Vossen wide sets or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl