Wheel Fitment Guide - Jaguar XE S (X760 3.0 V6 Supercharged 340 hp / 380 hp)

Wheels Fitment Guide - Jaguar XE S (X760 3.0 V6 Supercharged)

Model generation X760 (2015-2019) | 3.0 V6 AJ126 Supercharged (340 hp / 380 hp - 450 Nm) | Lightweight Aluminum Architecture, Adaptive Dynamics & Sport Suspension

Wheels Fitment Guide Jaguar XE S X760 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Jaguar XE S (X760)?
The Jaguar XE S (X760 generation with the sonorous 3.0-litre V6 Supercharged engine, produced from 2015 to 2019 with an original new price of approximately € 64.900,- to € 69.800,-) is a pure-bred British driver’s sports saloon. Powered by the Roots-type supercharged V6 engine with 340 PS or 380 PS (450 Nm torque), a ZF 8-speed Quickshift automatic, double wishbone front suspension built on a 75% aluminium iQ[Al] structure and rear-wheel drive, the XE S was developed to take on the BMW M340i and Audi S4 directly. The XE S uses the 5x108 bolt pattern with a 63.4 mm centre bore and M12x1.5 conical wheel bolts. Crucial for the XE S is the factory Staggered (wide-set) arrangement. Factory-fitted, the XE S rides on 19 inch Venom or Propeller wheels (7.5J ET44 front with 225/40 R19 & 8.5J ET32.5 rear with 255/35 R19 Pirelli P Zero tyres) or optional 20 inch Propeller/Matrix wheels (8.0J ET44.5 front with 235/35 R20 & 9.0J ET42 rear with 265/30 R20 tyres). To house the red or black sports brake calipers and 350 mm ventilated discs up front and to fill the track width without scratching, precise wheel selection is required. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and chassis number.

1. Factory specifications (OEM) Jaguar XE S X760

The values below represent the original factory parameters of the Jaguar XE S (X760 3.0 V6 Supercharged). Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x108 Standard Jaguar / Land Rover 5-bolt circle on the X760 platform.
Centre bore (CB) 63.4 mm Standard Jaguar centre bore. Hub centring rings required for wheels with a larger centre bore (e.g. 67.1 mm or 73.1 mm).
Wheel fastening type M12 x 1.5 Conical Bolts Torque of 125 Nm recommended by Jaguar Land Rover.
OEM Wheel sizes (19" Staggered Venom / Propeller) 7.5J x 19 ET44 Front
8.5J x 19 ET32.5 Rear
Factory 19 inch alloy wide-set in RWD configuration.
OEM Wheel sizes (20" Staggered Propeller / Matrix) 8.0J x 20 ET44.5 Front
9.0J x 20 ET42 Rear
Factory 20 inch polished or dark grey alloy wide-set.
OEM Tyre sizes 225/40 R19 Front & 255/35 R19 Rear (19")
235/35 R20 Front & 265/30 R20 Rear (20")
Supplied on Pirelli P Zero J (Jaguar OEM spec) or Continental SportContact 5P with XL Load Index.

2. Aftermarket Fitment Guide (19" & 20" Jaguar XE S)

Do you want to equip your Jaguar XE S with a wider rear axle, a deeper concave or save weight with Flow Formed / Custom Forged wheels from brands like Vossen (HF-3 / HF-5 / EVO in 5x108), Concaver (CVR1 / CVR4), JR-Wheels (JR21 / JR30 / SL01), BC Forged, OZ Racing, Quicksilver, Remus, Velocity AP or Maxton Styling? Below you’ll find the ideal sizes for a scratch-free fit around the 350 mm sports brakes.

Rim diameter & construction Position Recommended rim width (J) Ideal ET range Recommended tyre size
19 Inch (OEM+ Flush Street Performance Wide-set Sweet Spot) Front
Rear
8.5J Front
9.5J Rear
ET40 - ET45
ET35 - ET42
235/40 R19 Front
265/35 R19 Rear
20 Inch (OEM+ Flush Fast Road Wide-set Sweet Spot) Front
\r\n\t\t\tRear
8.5J Front
\r\n\t\t\t9.5J or 10.0J Rear
ET40 - ET45
\r\n\t\t\tET38 - ET42
245/35 R20 Front
\r\n\t\t\t275/30 R20 Rear
20 Inch (Aggressive Deep Concave / Stance Wideset) Front
\r\n\t\t\tRear
9.0J Front
\r\n\t\t\t10.0J Rear
ET35 - ET40
\r\n\t\t\tET35 - ET40
245/35 R20 Front
\r\n\t\t\t285/30 R20 Rear (Slight stretch on 10.0J rear)

3. Spacers & Fitment Rules for XE S X760

Would you like to push the original 19" or 20" Venom/Propeller factory wheels (7.5J ET44 / 8.5J ET32.5) further out to sit flush with the body hips?

  • Spacers: On the original factory wheels H&R or Eibach spacers of 12 mm to 15 mm can be fitted at the front and 12 mm to 15 mm at the rear. Use only hub-centric aluminium spacers with the specific 5x108 bolt pattern and 63.4 mm hub bore, together with extended M12x1.5 conical wheel bolts.
  • 350mm Sport Brake Clearance: The XE S has 2-piston sport calipers and 350 mm vented discs at the front. When selecting aftermarket 19 or 20 inch alloy wheels there must be sufficient spoke clearance around the front calipers.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspension to 2 to 5 cars daily. We use transparent fixed rates (excl. VAT):

Part / Service Labour Rate (Excl. VAT) Indicative Fitment Time
Complete Wheel Set Fit & Balance € 75 - € 115 45 - 60 minutes
Front Splitter / Bumper Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vans / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitment (Commercial Vans / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Terms

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of over 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect parts ourselves on a daily basis, giving you 100% fitment guarantee, manufacturer warranty and MOT certainty.

How does the vehicle inspection and fitment guarantee of Wheels 'N Customs work?

In our webshop you filter parts by Brand, Type, Version and Year (we intentionally do not use a registration-plate filter to avoid incorrect database matches). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheelarches. Only after 100% approval will your order be processed or fitted.

Are the wheels and parts we fit approved for the inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Quicksilver/Velocity AP exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This ensures a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Model/Specification, restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Jaguar XE S (X760 3.0 V6 Supercharged 340 hp / 380 hp), would you like advice on 350mm sports brake caliper clearance, 19 or 20 inch Vossen / Concaver / JR-Wheels wide sets or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl