Model generation WK2 (2012-2021) | 6.4 V8 HEMI Naturally Aspirated (468 hp / 624 Nm) | Quadra-Trac Active 4WD, Bilstein Adaptive Damping & Brembo 6-Piston Brakes

Why is correct wheel fitment crucial for the Jeep Grand Cherokee SRT (WK2)?
\r\nThe Jeep Grand Cherokee SRT (WK2 generation, produced from 2012 to 2021 with an original new price of approx. € 64.500,- to € 69.800,-) is a brute, roaring American high-performance SUV. Powered by the gigantic 6.4-litre naturally aspirated HEMI V8 engine with 468 HP and 624 Nm torque, a ZF 8-speed automatic, Launch Control and Quadra-Trac Active On-Demand four-wheel drive, the SRT commands immediate respect on the road. The Grand Cherokee SRT uses the American bolt pattern 5x127 (5x5.0") with a 71.5 mm centre bore and M14x1.5 wheel bolts. Factory-fitted, the SRT rides on wide forged 20 inch 'Goliath' or 'Spider Monkey' wheels (10.0J ET50 all-round with 295/45 R20 Pirelli P Zero RunFlat tyres). The most important technical fitment aspect is the massive red 6-piston Brembo calipers and 380 mm drilled discs at the front. When selecting aftermarket or wide 22 inch sets (such as 20x10.0J or 22x10.5J/11.0J with ET35 to ET45 from Ferrada, Velgen Wheels, Vossen or Niche) the wheels sit impressively flush with the widened SRT wheel arch extensions. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Version, Year and chassis number.
The values below represent the original factory parameters of the Jeep Grand Cherokee SRT / SRT8 (WK2 6.4 V8 HEMI). Use these as technical reference when purchasing new wheels or wheel spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x127 (5x5.0") | Standard Jeep / Dodge 5-lug bolt circle on the WK2 platform. |
| Centre bore (CB) | 71.5 mm | Standard Jeep / Chrysler centre bore. Hub-centric rings required for wheels with a larger centre bore (e.g. 78.1 mm). |
| Wheel attachment type | M14 x 1.5 Conical Nuts | 150 Nm torque recommended by SRT Performance. |
| OEM Wheel size (20" Forged Goliath / Spider Monkey) | 10.0J x 20 ET50 All-round (Square) | Factory 20 inch forged alloy wheels in a square setup. |
| OEM Tyre sizes | 295/45 R20 | Supplied on Pirelli P Zero RunFlat or Pirelli Scorpion Verde with XL Load Index. |
Do you want to give your Jeep Grand Cherokee SRT a wider track, a more aggressive look or save weight with Flow Formed / Custom Forged wheels from brands like Ferrada (FR1 / FR2 / FR4 in 5x127), Velgen Wheels (VMB5 / VF5), Vossen (HF-2 / HF-3), Niche, Borbet, Corsa, Borla, Corsa Exhaust or Maxton-styling? Below you will find the ideal sizes for a scratch-free clearance around the 380mm 6-piston Brembo brakes.
| Wheel diameter & construction | Position | Recommended rim width (J) | Ideal ET range | Recommended tyre size |
|---|---|---|---|---|
| 20 Inch (Lightweight Street & Winter Sweet Spot) | Front & Rear (Square) | 10.0J | ET35 - ET50 | 295/45 R20 All-round |
| 22 Inch (OEM+ Flush Fast Road & Stance Sweet Spot) | Front & Rear (Square) | 10.5J / 11.0J | ET35 - ET45 | 285/35 R22 or 305/35 R22 All-round |
| 22 Inch (Aggressive Deep Concave Wide Setup) | Front & Rear (Square) | 11.0J | ET30 - ET38 | 305/35 R22 All-round (Fills the wide SRT fender flares to the maximum) |
Would you like to original 20" Goliath or Spider Monkey factory wheels (10.0J ET50) to sit a little further out so they sit flush with the fender flares?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspensions to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):
| Item \/ Operation | Labour Rate (Excl. VAT) | Indicative Labour Time |
|---|---|---|
| Complete Wheel Set Fit & Balance | € 75 - € 115 | 45 - 60 minutes |
| Front Splitter \/ Bumper Lip \/ Splitter Fitment | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitment | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitment | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension \/ Boot Spoiler Fitment | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitment (Commercial Vehicles \/ SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitment (Commercial Vehicles \/ Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back \/ Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.
In our webshop you filter parts by Brand, Type, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach\/H&R\/KW, Borla\/Corsa exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011\/83\/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom drilled wheels (Custom ET\/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand\/Type\/Version restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Jeep Grand Cherokee SRT or SRT8 (WK2 6.4 V8 HEMI 468 hp), would you like advice on 380mm 6-piston Brembo brake caliper clearance, 20 or 22 inch Ferrada / Velgen Wheels / Vossen wheels or wheel spacers, or would you like to receive an all-in quote including workshop fitting in Nijkerk?