Wheel Fitment Guide - Lotus Evora & Evora S (3.5 V6 / V6 Supercharged 280 hp / 350 hp)

Wheels Fitment Guide - Lotus Evora & Evora S (3.5 V6 / V6 Supercharged)

Model generation Type 122 (2009-2015) | 3.5 V6 2GR-FE (280 hp / 350 hp Evora S - 400 Nm) | Extruded Aluminium Tub Chassis, AP Racing 4-Piston Brakes & Staggered Setup

Wheels Fitment Guide Lotus Evora Evora S Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Lotus Evora & Evora S?
The Lotus Evora and the spicy Evora S (Type 122, produced between 2009 and 2015 with an original new value of approximately € 66.000,- to € 69.800,-) combine pure Lotus steering precision with a 2+2 mid-engine layout. Built on an advanced extruded and bonded aluminium tub chassis and powered by the robust 3.5-litre V6 engine (280 HP naturally aspirated or 350 HP with a Harrop Roots-type supercharger on the Evora S), the Evora weighs under 1,380 kg. The Evora uses the bolt pattern 5x114.3 with a 68.1 mm centre bore and M12x1.5 wheel bolts. Crucial for the Lotus Evora is the factory-fitted staggered (dual diameter) setup. Factory spec places the Evora on 18 inch front / 19 inch rear cast or forged wheels (8.0J ET52.5 front with 225/40 R18 & 9.5J ET69 rear with 255/35 R19 tyres) or the optional 19 inch front / 20 inch rear forged wheels (8.0J ET52.5 front with 235/35 R19 & 9.5J ET69 rear with 275/30 R20 Pirelli P Zero Corsa tyres). To accommodate the silver or red 4-pot AP Racing calipers and 350 mm drilled front discs and to prevent contact with the polyester inner wings, an extremely high rear offset (ET55–ET69 on 9.5J/10.0J) is necessary. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Version, Year of Manufacture and chassis number.

The image below shows an original forged alloy wheel specifically designed for the Lotus Evora chassis:

Original forged light-alloy wheel for the Lotus Evora S

1. Factory specifications (OEM) Lotus Evora & Evora S

The values below represent the original factory parameters of the Lotus Evora & Evora S (3.5 V6 / V6 Supercharged). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Explanation & Advice
Bolt pattern (PCD) 5x114.3 Standard Lotus Performance 5-lug bolt circle on the Type 122 platform.
Centre bore (CB) 68.1 mm Standard Lotus Evora centre bore. Hub-centric rings are required for wheels with a larger centre bore (e.g. 73.1 mm).
Wheel fastening type M12 x 1.5 Conical Bolts A tightening torque of 105 Nm is recommended by Lotus Cars Hethel.
OEM Wheel sizes (18" Front / 19" Rear Standard Cast) 8.0J x 18 ET52.5 Front
9.5J x 19 ET69 Rear
Factory 18/19 inch alloy staggered set in Silver or Gloss Black finish.
OEM Wheel sizes (19" Front / 20" Rear Option Forged) 8.0J x 19 ET52.5 Front
9.5J x 20 ET69 Rear
Factory 19/20 inch ultra-light forged staggered set on Evora S models.
OEM Tyre sizes 225/40 R18 Front & 255/35 R19 Rear (18/19")
235/35 R19 Front & 275/30 R20 Rear (19/20")
Supplied on Pirelli P Zero, Pirelli P Zero Corsa LTS (Lotus spec) or Michelin Pilot Sport Cup 2 with XL Load Index.

2. Aftermarket Fitment Guide (18"/19" & 19"/20" Lotus Evora / S)

Do you want to equip your Lotus Evora or Evora S with a dedicated circuit/trackday wheelset, a more aggressive track width or weight savings with Custom Forged wheels from brands like BC Forged (KL / RZ in 5x114.3 Evora fitment), Team Dynamics (Pro Race 1.3), Hethel Sport, JR-Wheels (JR11 / JR30 / SL01 in custom ET), OZ Racing, Komo-Tec, Larini, Janspeed or Maxton-styling? Below you can see the ideal sizes for a scratch-free fitment around the 350 mm AP Racing brakes.

Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Value Range Recommended Tyre Size
18" Front / 19" Rear (Lightweight Circuit / Trackday Sweet Spot) Front
Rear
8.0J Front
9.5J Rear
ET45 - ET52.5
ET58 - ET69
225/40 R18 Front
255/35 R19 or 265/35 R19 Rear (Semi-slicks Nankang AR-1 / Cup 2)
19" Front / 20" Rear (OEM+ Flush Fast Road Wide-set Sweet Spot) Front
Rear
8.5J Front
10.0J Rear
ET45 - ET50
ET55 - ET65
235/35 R19 Front
275/30 R20 or 285/30 R20 Rear
19" Front / 20" Rear (Aggressive Deep Concave / Wide Breedset) Front
Rear
8.5J Front
10.5J Rear
ET42 - ET48
ET52 - ET60
235/35 R19 Front
285/30 R20 Rear (Light stretch on 10.5J rear)

3. Wheel Spacers & Fitment Rules for Lotus Evora

Do you want to push the original 18/19" or 19/20" factory wheels (8.0J ET52.5 / 9.5J ET69) slightly further out to make them sit flush with the bodywork?

  • Wheel Spacers (Spacers): Due to the very high factory ET value at the rear (ET69) you can fit H&R, Eibach or Hethel Sport spacers of 10 mm to 12 mm at the front and 15 mm to 20 mm at the rear on the original factory wheels. Use only hub-centric aluminium spacers with the specific 5x114.3 bolt pattern and 68.1 mm centre bore with extended M12x1.5 wheel bolts.
  • 350mm AP Racing Clearance: The Evora S has aluminium 4-pot AP Racing calipers and 350 mm drilled discs at the front. When selecting aftermarket alloy wheels for the front axle you must check that the inner part of the wheel provides sufficient spoke clearance.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Task Labour Rate (Excl. VAT) Indicative Fitment Time
Complete Wheel Set Fitment & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitment (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of over 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, factory warranty and MOT confidence.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or email for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW/Komo-Tec, Larini/Janspeed exhaust systems and bodykits from Maxton Design carry official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially ordered bespoke items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Version, restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Lotus Evora or Evora S (3.5 V6 / V6 Supercharged 280 hp / 350 hp), would you like advice on 350mm 4‑piston AP Racing brake clearance, 18/19 or 19/20 inch BC Forged / Hethel Sport wide sets or spacers, or would you like an all-in quote including workshop fitting at Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl