Wheel Fitment Guide - Maserati Ghibli & Ghibli S / S Q4 (M157 3.0 V6 TwinTurbo 330 hp / 410 hp)

Wheels Fitment Guide - Maserati Ghibli & Ghibli S / S Q4 (M157 3.0 V6 TwinTurbo)

Model generation M157 (2013-2024) | 3.0 V6 TwinTurbo Ferrari‑Engine (330 hp / 410 hp - 550 Nm) | Skyhook Active Suspension & Q4 All‑Wheel Drive Staggered Setup

Wheels Fitment Guide Maserati Ghibli M157 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Maserati Ghibli (M157)?
\r\nThe Maserati Ghibli (M157 generation, produced from 2013 with an original new price of approximately € 66.500,- to € 69.900,- for the V6 TwinTurbo) is the epitome of Italian style, emotion and sportiness. Powered by a 3.0-litre V6 TwinTurbo engine built by Ferrari in Maranello (330 HP or 410 HP on the Ghibli S / S Q4 with 550 Nm torque), a screaming sports exhaust, ZF 8-speed automatic and optional Q4 all-wheel drive, the Ghibli blends executive luxury with supercar DNA. The Ghibli M157 uses the bolt pattern 5x114.3 with a 67.1 mm hub bore and M14x1.5 wheel bolts. Crucial for the Maserati Ghibli is the factory Staggered (wide-set) configuration. From factory the Ghibli sits on 18 inch Poseidone wheels (8.5J ET43 front & rear) or the optional 19, 20 and 21 inch Proteo, Urano or Titano wheels (8.5J ET43 front with 245/45 R19 & 10.0J ET40 rear with 275/40 R19 or 245/35 R21 front & 285/30 R21 rear Pirelli P Zero AR tyres). To accommodate the imposing 6-piston Brembo calipers and 360 mm ventilated discs up front and to avoid contact, precise wheel selection is required. When choosing aftermarket wide-sets (such as 20x9.0J ET35-ET43 front & 20x10.5J ET35-ET40 rear from Vossen, Concaver, JR-Wheels or Novitec) the track width and rear concavity are dramatically increased. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and chassis number.

The image below shows an original 21 inch anthracite Titano alloy wheel made specifically for the Maserati Ghibli:

21 inch original Maserati Ghibli Titano alloy wheel

1. Factory specifications (OEM) Maserati Ghibli M157

The values below represent the original factory parameters of the Maserati Ghibli, Ghibli S & S Q4 (M157 3.0 V6 TwinTurbo). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x114.3 Standard Maserati 5-lug bolt circle on the M157 platform.
Hub diameter (CB) 67.1 mm Standard Maserati hub bore. Centre rings required for wheels with a larger hub diameter (e.g. 73.1 mm).
Wheel fastening type M14 x 1.5 Conical Bolts 140 Nm torque recommended by Maserati Corse.
OEM Wheel sizes (18" Standard Poseidone) 8.5J x 18 ET43 Front & Rear Factory 18 inch alloy wheels in a square setup.
OEM Wheel sizes (19" / 20" / 21" Option Proteo / Urano / Titano Staggered) 8.5J x 19 ET43 Front / 10.0J x 19 ET40 Rear
\r\n\t\t\t8.5J x 20 ET43 Front / 10.5J x 20 ET40 Rear
\r\n\t\t\t8.5J x 21 ET43 Front / 10.5J x 21 ET40 Rear
Factory 19, 20 & 21 inch polished, black or anthracite wide-set alloys on S & S Q4 variants.
OEM Tyre sizes 235/50 R18 All around (18")
\r\n\t\t\t245/45 R19 Front & 275/40 R19 Rear (19")
\r\n\t\t\t245/40 R20 Front & 285/35 R20 Rear (20")
\r\n\t\t\t245/35 R21 Front & 285/30 R21 Rear (21")
Supplied on Pirelli P Zero AR (Maserati OEM spec), Continental SportContact 6 or Dunlop SP Sport Maxx RT with XL Load Index.

2. Aftermarket Fitment Guide (20" & 21" Ghibli M157)

Would you like to equip your Maserati Ghibli with a wider rear axle, deeper concavity or weight savings using Flow Formed / Custom Forged wheels from brands such as Vossen (HF-1 / HF-2 / HF-5 in 5x114.3), Concaver (CVR1 / CVR3), JR-Wheels (JR21 / JR30 / SL01), BC Forged, Novitec, Capristo, Larini, Tubi Style or Maxton-styling? Below you will find the ideal sizes for a scratch-free fit around the 360mm 6-piston Brembo brakes.

Wheel size & Construction Position Recommended Rim Width (J) Ideal ET Value Range Recommended Tyre Size
20 Inch (OEM+ Flush Street Performance Wideset Sweet Spot) Front
\r\n\t\t\tRear
8.5J or 9.0J Front
\r\n\t\t\t10.0J or 10.5J Rear
ET35 - ET43
\r\n\t\t\tET35 - ET40
245/40 R20 Front
\r\n\t\t\t285/35 R20 Rear
21 Inch (OEM+ Flush Fast Road Wideset Sweet Spot) Front
\r\n\t\t\tRear
9.0J Front
\r\n\t\t\t10.5J Rear
ET35 - ET40
\r\n\t\t\tET35 - ET40
245/35 R21 Front
\r\n\t\t\t285/30 R21 (or 295/30 R21) Rear
22 Inch (Show & Stance Performance Wideset) Front
\r\n\t\t\tRear
9.0J Front
\r\n\t\t\t10.5J or 11.0J Rear
ET32 - ET38
\r\n\t\t\tET32 - ET38
245/30 R22 Front
\r\n\t\t\t295/25 R22 Rear

3. Wheel Spacers & Fitting Determinations for Ghibli M157

Would you like to push the original 19", 20" or 21" Titano/Urano factory wheels (8.5J ET43 / 10.5J ET40) slightly further out to sit flush with the hips of the Italian bodywork?

  • Wheel Spacers (Spacers): On the original factory wheels H&R, Novitec or Eibach spacers of 12 mm to 15 mm at the front and 15 mm to 20 mm at the rear can be fitted. Use only hub-centric aluminium spacers with the specific 5x114.3 bolt pattern and 67.1 mm centre bore with extended M14x1.5 wheel bolts.
  • 360mm 6-Piston Brembo Clearance: The Ghibli S and S Q4 have aluminium 6-piston Brembo calipers and 360 mm dual-cast discs at the front. When selecting aftermarket 20 or 21 inch alloy wheels, the inner side of the spoke profile on the front axle should always be checked for sufficient clearance to the caliper.

4. Fixed Workshop Labour Rates Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Labour Fitting Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fit & Balance € 75 - € 115 45 - 60 minutes
Front Splitter / Bumper Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitment (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, install and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, manufacturer warranty and MOT certainty.

How does the vehicle inspection and fitment guarantee from Wheels 'N Customs work?

In our webshop you can filter parts by Brand, Type, Variant and Year of Manufacture (we intentionally do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW/Novitec, Capristo/Novitec/Tubi Style exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and mounted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Variant restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about exact fitment for your Maserati Ghibli, Ghibli S or S Q4 (M157 3.0 V6 TwinTurbo 330 hp / 410 hp), would you like advice about 360mm 6-piston Brembo brake caliper clearance, 20 or 21 inch Vossen / Titano wide sets or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl