Model generation T9 (2015-2021) | 1.6 THP EP6FDTR (270 hp / 263 hp - 330 Nm) | Torsen Limited Slip Differential & 380mm Alcon Brakes
Why is correct wheel fitment crucial for the Peugeot 308 GTi by Peugeot Sport?
The Peugeot 308 GTi by Peugeot Sport (T9 generation, produced from 2015 to 2021 with an original new price of approximately € 38.000,- to € 43.500,-) was developed by Peugeot Sport’s motorsport division in Vélizy. Powered by the ridiculously powerful 1.6-litre THP turbo engine (270 HP or 263 HP Euro 6d) with forged pistons and paired with a mechanical Torsen limited-slip differential, the 308 GTi weighs only 1,205 kg. The car uses the French bolt pattern 5x108 with a 65.1 mm centre bore and M12x1.25 wheel bolts. Factory-spec 270/263 hp GTi models ride on ultralight 19 inch Carbone wheels (8.0J ET42 with 235/35 R19 Michelin Pilot Super Sport tyres). The biggest fitment obstacle for the 308 GTi are the massive red 4‑pot Alcon / Peugeot Sport brake calipers with 380 mm floating front discs. Regular 18 inch wheels will inevitably rub here. When choosing aftermarket 19 inch wheels (such as 19x8.0J or 19x8.5J with ET38 to ET42) an exact spoke curvature is required. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The image below shows the original 19 inch Carbone alloy wheel of the Peugeot 308 GTi by Peugeot Sport:
The values below represent the original factory parameters of the Peugeot 308 GTi by Peugeot Sport (T9 1.6 THP). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x108 | Standard PSA 5‑bolt circle on the EMP2 platform. |
| Centre bore (CB) | 65.1 mm | Standard Peugeot / Citroën centre bore. Hub rings required for wheels with a larger centre bore (e.g. 67.1 mm or 73.1 mm). |
| Wheel fastening type | M12 x 1.25 Flat Face / Conical Bolts | Torque of 110 Nm recommended by Peugeot Sport. |
| OEM wheel size (19" Standard GTi Carbone) | 8.0J x 19 ET42 | Factory 19 inch lightweight two‑tone alloy wheels in a square setup. |
| OEM tyre sizes | 235/35 R19 | Supplied on Michelin Pilot Super Sport or Michelin Pilot Sport 4S with XL load index. |
Do you want to equip your Peugeot 308 GTi by Peugeot Sport with a dedicated circuit/trackday wheelset, a wider stance or weight savings with Flow Formed wheels from brands such as OZ Racing (Ultraleggera / Superturismo LM / Formula HLT in 5x108), JR‑Wheels (JR11 / JR21 / JR30 / SL01), Concaver, MSW, Sparco, Remus, Milltek or Maxton‑styling? Below are the ideal sizes for a scratch‑free clearance around the 380 mm Alcon brakes.
| Wheel diameter & construction | Position | Recommended rim width (J) | Ideal ET value range | Recommended tyre size |
|---|---|---|---|---|
| 19 Inch (OEM+ Flush Street Performance Sweet Spot) | Front & Rear (Square) | 8.0J / 8.5J | ET38 - ET42 | 235/35 R19 (or 245/35 R19) |
| 19 Inch (Aggressive Fast Road & Stance Setup) | Front & Rear (Square) | 8.5J | ET35 - ET38 | 235/35 R19 (Light stretch on 8.5J) |
Do you want to push the original 19" Carbone factory wheels (8.0J ET42) slightly further out to make them sit flush with the arches?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):
| Component / Operation | Labour Rate (Excl. VAT) | Indicative Labour Time |
|---|---|---|
| Complete Wheel Set Mounting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Splitter / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and APK-certainty.
In our webshop you filter parts by Brand, Model, Variant and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Remus/Milltek exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free APK inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your online order within 14 days. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Model/Variant restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Peugeot 308 GTi by Peugeot Sport (T9 1.6 THP 270/263 hp), would you like advice about 380mm Alcon caliper clearance, OZ Racing / JR-Wheels wheels or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?